Item # C.S.I. Section 11420
FRYERS
1ER85 SERIES
FREE STANDING ELECTRIC FRYERS
1ER85A Solid state analog knob controls.
1ER85D
1ER85C
STANDARD FEATURES
Stainless steel front and sides. ■
Four 6" adjustable legs. ■
16 gauge stainless steel fry tank, 85 lb. capacity. ■
Ten year limited fry tank warranty. ■
1 ■
24 kW low watt density ribbon style heating elements. ■
Multiple fat melt modes. ■
High limit control. ■
Twin fry baskets with plastic coated handles. ■
One year limited parts and labor warranty. ■
Solid state digital controls.
Programmable computer controls.
1
⁄4" full port ball type drain valve.
Model 1ER85C
Shown with caster accessory
SPECIFICATIONS
Electric deep fat fryer, Vulcan-Hart Model No. 1ER85A: Solid
analog state knob, 1ER85D: Solid state digital, 1ER85C: Computer
temperature controls are adjustable from 200° to 390°F and include
3 melt cycle and high limit control. Stainless steel cabinet with
four 6" adjustable legs. 16 gauge stainless steel fry tank holds 85
lbs. of frying compound. 1
1
⁄4" full port ball type drain valve. 24 kW
low watt density ribbon style heating elements. Twin fry baskets.
Power supply is 208 volt, 50/60 Hz, 3 phase.
Overall Dimensions:
21"w x 34
1
⁄8"d x 411⁄16"h working height is 361⁄4"
NSF listed. CSA design certied.
Specify voltage when ordering.
CONTROLS
1ER85A Solid state analog knob control. Accurate temperature
control 200°F to 390°F within +/- 2°. Multiple fat melt
modes, fast recovery.
1ER85D Solid state digital read temperature control. Accurate
temperature control 200°F to 390°F within +/- 2°.
Multiple fat melt modes, fast recovery, boil out
mode and two countdown timers.
1ER85C Computer control digital read temperature control.
Accurate temperature control 200°F to 390°F
within +/- 2°. Multiple fat melt modes, fast recovery
and boil out mode. Ten programmable product
key sand ten countdown timers. Secondary and
advanced programming options.
OPTIONAL FEATURES (Factory Installed)
480 volt, 3 phase. (Separate 120 volt, 20 amp electric
supply required.)
Second year extended limited parts and labor warranty
ACCESSORIES (Packaged & Sold Separately)
Stainless steel tank cover - doubles as a work surface top
Set of four 6" adjustable casters (2 locking).
Extra set of twin fry baskets – 91⁄4"w x 151⁄4"d x 6"h
Large single fry basket – 183⁄4"w x 151⁄4"d x 6"h
Frymate™ VX21S dump station
Connecting Kit(s) – connect two fryers together (banking
strip, brackets and hardware)
10" high stainless steel removable splash guard
a divisi on of ITW F ood Equip ment Gro up LLC
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
F32901 (05/10)
INSTALLATION INSTRUCTIONS
FRYERS
1ER85 SERIES
FREE STANDING ELECTRIC FRYERS
An adequate ventilation system is required for Commercial 1.
Cooking Equipment. Information may be obtained by writing to
the National Fire Protection Association, Batterymarch Park,
Quincy, MA 02269. When writing refer to NFPA No. 96.
All models require a 6" clearance at both sides and rear adjacent 2.
to combustible construction.
All models require a 16" (407 mm) minimum clearance to adjacent 3.
open top burner units.
This appliance is manufactured for commercial installation only 4.
and is not intended for home use.
21.000
35.78
(909)
25.250
(641)
SERVICE CONNECTIONS:
NEMA 5-15P, 120 volt, 60 Hz, 1 phase electrical connection
required for 480 volt fryers. Not supplied with fryer.
NOTE: In line with its policy to continually improve its product,
Vulcan reserves the right to change materials and specications
without notice.
21.000
54.687
(13 89)
53.331
(13 55)
39.437
(1002)
3.375
34.146
6.00
(152)
.938
19.1 87
21.7 50
(552)
34.519
(877)
ELECTRICAL CHARACTERISTICS
NOMINAL AMPS PER LINE WIRE
3 PHASE
MODEL
NuMbER
TOTAL kW
CONNECTION
3 PH LOADING
kW PER PHASE
208 VOLT 480 VOLT 208 VOLT 480 VOLT
X-Y X-Z X Y Z X Y Z
1ER85 24 8 8 67 67 67 29 29 29
This appliance is manufactured for commercial use only and is not intended for home use.
a divisi on of ITW Food Equip ment Gro up LLC
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
F32901 (05/10)