Vulcan Hart 1ER85A General Manual
Item # C.S.I. Section 11420
FRYERS
1ER85 SERIES
FREE STANDING ELECTRIC FRYERS
1ER85A Solid state analog knob controls.
1ER85D Solid state digital controls.
1ER85C Programmable computer controls.
STANDARD FEATURES
■ Stainless steel front and sides.
■ Four 6" adjustable legs.
■ 16 gauge stainless steel fry tank, 85 lb. capacity.
■ Ten year limited fry tank warranty.
■ 11⁄4" full port ball type drain valve.
■ 24 kW low watt density ribbon style heating elements.
■ Multiple fat melt modes.
■ High limit control.
■ Twin fry baskets with plastic coated handles.
■ One year limited parts and labor warranty.
Model 1ER85C
Shown with caster accessory
SPECIFICATIONS
Electric deep fat fryer, Vulcan-Hart Model No. 1ER85A: Solid
analog state knob, 1ER85D: Solid state digital, 1ER85C: Computer
temperature controls are adjustable from 200° to 390°F and
include 3 melt cycle and high limit control. Stainless steel cabinet
with four 6" adjustable legs. 16 gauge stainless steel fry tank holds
85 lbs. of frying compound. 11⁄4" full port ball type drain valve.
24 kW low watt density ribbon style heating elements. Twin fry
baskets. Power supply is 208 volt, 50/60 Hz, 3 phase.
Overall Dimensions:
21"w x 341⁄8"d x 411⁄16"h working height is 361⁄4"
NSF listed. CSA design certied.
Specify voltage when ordering.
CONTROLS
1ER85A Solid state analog knob control. Accurate temperature
control 200°F to 390°F within +/- 2°. Multiple fat melt
modes, fast recovery.
1ER85D Solid state digital read temperature control. Accurate
temperature control 200°F to 390°F within +/- 2°.
Multiple fat melt modes, fast recovery, boil out
mode and two countdown timers.
1ER85C Computer control digital read temperature control.
Accurate temperature control 200°F to 390°F
within +/- 2°. Multiple fat melt modes, fast recovery
and boil out mode. Ten programmable product
key sand ten countdown timers. Secondary and
advanced programming options.
OPTIONAL FEATURES (Factory Installed)
480 volt, 3 phase. (Separate 120 volt, 20 amp electric
supply required.)
Second year extended limited parts and labor warranty
ACCESSORIES (Packaged & Sold Separately)
Stainless steel tank cover - doubles as a work surface top
Set of four 6" adjustable casters (2 locking).
Extra set of twin fry baskets – 91⁄4"w x 151⁄4"d x 6"h
Large single fry basket – 183⁄4"w x 151⁄4"d x 6"h
Frymate™ VX21S dump station
Connecting Kit(s) – connect two fryers together (banking
strip, brackets and hardware)
10" high stainless steel removable splash guard
a divisi on of ITW F ood Equip ment Gro up LLC
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
F3 2 9 98 ( 0 6 /11)
ER KLEENSCREEN PLUS® FILTRATION SYSTEM
BUILT-IN FILTRATION SYSTEM FOR 2ERF, 3ERF & 4ERF FRYERS
Model 2ER85DF
Shown on casters (Accessor y)
FRYERS
STANDARD FEATURES
■ Filter system accommodates maximum of four fryer
cabinets (ER50F), maximum of three (ER85F).
■ Boil Out ByPass™ easily removes boil out solution from fry
tank without contact of drain manifold, lter pan or motor/
pump.
■ Drain valve interlock switch (DVI). Turns off heating
elements automatically when draining oil or lifting heating
elements during cleaning.
■ Drawn (seamless) 18 gauge stainless steel lter pan. 70
lbs. frying compound capacity on ER50F, 110 lbs. capacity
on ER85F.
■ 6" adjustable legs.
■ Paperless stainless steel 2 sided lter screen – surface
area 270 sq. in. Micro Filtration Fabric Envelope
particulate down to .5 microns.
■ 1⁄3 H.P. motor and pump circulates frying compound at a
rate of 8.0 gallons per minute.
■ One touch push button switch to engage pump and motor
(solid state controls).
■ Tank brush and clean-out rod.
■ One year limited parts and labor warranty.
■ 6' High Temperature Discard Hose.
■ 10 year fry tank limited warranty.
lters out
SPECIFICATIONS
Built-in lter system, Vulcan-Hart Model No. (# of fryers – 2, 3
or 4) ER (50 or 85) (control type A, D, or C) F (add sufx -F to fryer
battery Model No., i.e. 2ER50DF). Filter system accommodates a
maximum of four cabinets for ER50F and maximum of three for
ER85F. Drawer style lter pan assembly holds 70 lbs. shorten ing
capacity for ER50F and 110 lbs. capacity for ER85F. Filter vessel
constructed of drawn (seamless) 18 gauge stainless steel. The
2ER50F lter pan weighs only 12.2 lbs. and the lter pan for the
2ER85F weighs only 20.5 lbs. 1⁄3 H.P. motor and pump circulates
hot frying compound at the rate of 8 gallons per minute, activated
by a one touch push button switch. System provided standard with
paperless stainless steel mesh lter screen. Optional KleenScreen
PLUS® envelopes lter out particulate down to .5 microns (trial
package included). Standard equipment comes on legs, has a
tank brush and cleanout rod. Hands free oil return line connection.
Drain valve interlock switch turns fryer's heating elements off when
drain valve is opened. Power supply is 208 volt, 60 Hz, 3 phase.
UL listed. NSF listed.
ACCESSORIES (Packaged & Sold Separately)
Stainless steel tank cover – doubles as a work surface top.
Micro-Filtration Fabric Envelopes – 6 lters/per package.
Casters, adjustable (2 locking, 2 non-locking).
“Add-On” Frymate™ – VX15S or VX21S.
Rear oil reclamation discard connection (factory installed).
Prison Security Package (factory installed).
Single Basket Lift (factory installed).
OPTIONS
480 volt, 3 phase (NEMA 5-15P). (Separate 120 volt, 20 amp
electric supply required.)
Second year extended limited parts and labor warranty.
REFERENCE MATERIALS
■ See 1ER50 Spec Sheet F32900 for electrical specs.
■ See 1ER85 Spec Sheet F32901 for electrical specs.
■ See 1ERF Spec Sheet F32969 for single unit KleenScreen
PLUS®.
a divisi on of ITW F ood Equip ment Gro up LLC
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
F3 2 9 98 ( 0 6 /11)
Loading...