Vulcan Hart 1ER50A General Manual

Item # C.S.I. Section 11420
FRYERS
1ER50 SERIES
FREE STANDING ELECTRIC FRYERS
1ER50A Solid state analog knob control.
1ER50 D Solid state digital controls.
1ER50 C Programmable computer controls.
STANDARD FEATURES
■ Stainless steel cabinet.
■ Set of four 6" adjustable legs.
■ 16 gauge stainless steel fry tank, 50 lb. capacity.
■ Ten year limited fry tank warranty.
■ 11⁄4" full port ball type drain valve.
■ 17 kW low watt density ribbon style heating elements.
■ Multiple fat melt modes.
■ High limit control.
■ Twin fry baskets with plastic coated handles.
■ 208 volt, 3 phase.
■ One year limited parts and labor warranty.
Model 1ER50D
Shown with caster accessory
SPECIFICATIONS
Electric deep fat fryer, Vulcan-Hart Model No. 1ER50A: Solid state analog knob, 1ER50D: Solid state digital, 1ER50C: Computer temperature controls are adjustable from 200°F to 390°F and multiple fat melt cycles and high limit control. Stainless steel cabinet with four 6" adjustable legs. 16 gauge stainless steel fry tank holds 50 lbs. of frying compound. 11⁄4" full port ball type drain valve. 17kW low watt density ribbon style heating elements. Twin fry baskets. Power supply is 208 volt, 50/60 Hz, 3 phase.
Overall Dimensions:
151⁄2"w x 341⁄8"d x 411⁄16"h. working height is 361⁄4".
NSF listed. CSA design certied.
Specify voltage when ordering.
CONTROLS
1ER50A Solid state knob control. Accurate temperature
control 200°F to 390°F within +/- 2°. Multiple fat melt modes, fast recovery.
1ER50 D Solid state digital read temperature control. Accurate
temperature control 200°F to 390°F within +/- 2°. Multiple fat melt modes, fast recovery and boil out mode and two countdown timers.
1ER50 C Computer control digital read temperature control.
Accurate temperature control 200°F to 390°F within +/- 2°. Multiple fat melt modes, fast recovery and boil out mode. Ten programmable product keys and ten countdown timers. Secondary and advanced programming options.
OPTIONAL FEATURES (Factory Installed)
480 volt, 3 phase. (Separate 120 volt, 20 amp electric supply required.)
Second year extended limited parts and labor warranty.
ACCESSORIES (Packaged & Sold Separately)
Stainless Steel Tank Cover – doubles as a work surface top Set of four 6" adjustable casters (2 locking) Extra set of Twin Fry Baskets – 61⁄2"w x 131⁄4"d x 6"h Large Single Fry Basket – 13"w x 131⁄4"d x 51⁄2"h Frymate™ VX15S Dump Station Connecting Kit(s) – connect two fryers together (banking
strip, brackets and hardware) 10" high stainless steel removable splash guard
a divisi on of ITW F ood Equip ment Gro up LLC
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
F3 2 9 97 ( 0 6/11)
ER KLEENSCREEN PLUS® FILTRATION SYSTEM
BUILT-IN FILTRATION SYSTEM FOR 2ERF, 3ERF & 4ERF FRYERS
Model 2ER85DF
Shown on casters (Accessor y)
FRYERS
STANDARD FEATURES
■ Filter system accommodates maximum of four fryer cabinets (ER50F), maximum of three (ER85F).
■ Boil Out ByPass™ easily removes boil out solution from fry tank without contact of drain manifold, lter pan or motor/ pump.
■ Drain valve interlock switch (DVI). Turns off heating elements automatically when draining oil or lifting heating elements during cleaning.
■ Drawn (seamless) 18 gauge stainless steel lter pan. 70 lbs. frying compound capacity on ER50F, 110 lbs. capacity on ER85F.
■ 6" adjustable legs.
■ Paperless stainless steel 2 sided lter screen – surface area 270 sq. in. Micro Filtration Fabric Envelope particulate down to .5 microns.
1⁄3 H.P. motor and pump circulates frying compound at a rate of 8.0 gallons per minute.
■ One touch push button switch to engage pump and motor (solid state controls).
■ Tank brush and clean-out rod.
■ One year limited parts and labor warranty.
■ 6' High Temperature Discard Hose.
■ 10 year fry tank limited warranty.
lters out
SPECIFICATIONS
Built-in lter system, Vulcan-Hart Model No. (# of fryers – 2, 3 or 4) ER (50 or 85) (control type A, D, or C) F (add sufx -F to fryer battery Model No., i.e. 2ER50DF). Filter system accommodates a maximum of four cabinets for ER50F and maximum of three for ER85F. Drawer style lter pan assembly holds 70 lbs. shorten ing capacity for ER50F and 110 lbs. capacity for ER85F. Filter vessel constructed of drawn (seamless) 18 gauge stainless steel. The 2ER50F lter pan weighs only 12.2 lbs. and the lter pan for the 2ER85F weighs only 20.5 lbs. 1⁄3 H.P. motor and pump circulates hot frying compound at the rate of 8 gallons per minute, activated by a one touch push button switch. System provided standard with paperless stainless steel mesh lter screen. Optional KleenScreen
PLUS® envelopes lter out particulate down to .5 microns (trial
package included). Standard equipment comes on legs, has a tank brush and cleanout rod. Hands free oil return line connection. Drain valve interlock switch turns fryer's heating elements off when drain valve is opened. Power supply is 208 volt, 60 Hz, 3 phase.
UL listed. NSF listed.
ACCESSORIES (Packaged & Sold Separately)
Stainless steel tank cover – doubles as a work surface top.
Micro-Filtration Fabric Envelopes – 6 lters/per package.
Casters, adjustable (2 locking, 2 non-locking).
“Add-On” Frymate™ – VX15S or VX21S.
Rear oil reclamation discard connection (factory installed).
Prison Security Package (factory installed).
Single Basket Lift (factory installed).
OPTIONS
480 volt, 3 phase (NEMA 5-15P). (Separate 120 volt, 20 amp electric supply required.)
Second year extended limited parts and labor warranty.
REFERENCE MATERIALS
■ See 1ER50 Spec Sheet F32900 for electrical specs.
■ See 1ER85 Spec Sheet F32901 for electrical specs.
■ See 1ERF Spec Sheet F32969 for single unit KleenScreen
PLUS®.
a divisi on of ITW F ood Equip ment Gro up LLC
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
F3 2 9 97 ( 0 6/11)
Loading...
+ 1 hidden pages