Vulcan V1FT36 User Manual
Item # C.S.I. Section 11420
HEAVY DUTY COOKING
HEAVY DUTY GAS RANGE
RADIAL FIN FRENCH TOP / 36" WIDE GAS RANGE
Model V1FT36S
shown on a standard oven base
V1FT36
V1FT36B
V1FT36S
V1FT36C
Radial Fin French Top / Modular
Radial Fin French Top / Cabinet Base
Radial Fin French Top / Standard Oven
Radial Fin French Top / Convection Oven
STANDARD FEATURES
■ Stainless steel front, front top ledge, burner box, sides, base
and stub back
■ 11⁄4" diameter front gas manifold with 11⁄4" rear gas connection
(capped)
■ 45,000 BTU/hr. burners (3 ring burner)
■ 50,000 BTU/hr. standard oven burner
■ 32,000 BTU/hr. convection oven burner
■ Porcelain oven cavity
■ Individual pilots and controls for each burner
■ Polished cast iron French Top
■ 4" stainless steel stub riser
■ 6" adjustable stainless steel legs for “S”, “C”, & “B” models
(no legs for modular model)
■ Stainless steel cabinet base doors
■ One year limited parts and labor warranty
OPTIONAL FE ATURES (Factory Installed)
SPECIFICATIONS
36" wide heavy duty gas range, Vulcan model No. V1FT36
(modular), V1FT36B (cabinet base), V1FT36S (standard oven
base) or V1FT36C (convection oven base). Modular construction
for ease of installation. Stainless steel front, plate ledge, front top
ledge with pull-out condiment rails, sides, base, stub back and 6"
adjustable legs on all “B”, “S”, & “C” models. Stainless steel extra
deep crumb tray. Three cast ring burners totaling 45,000 BTU/hr.
Individual pilots and controls for each burner. Heavy polished cast
iron French plate. Standard Oven: 50,000 BTU/hr. with porcelain
oven bottom, sides, and interior door panel. Convection Oven:
32,000 BTU/hr. with porcelain oven bottom, sides, and interior door
panel (115v-1 phase blower motor, 4 amps, 6' cord & plug). Ovens
measure 27"w x 27"d x 13"h. Standard oven thermostats adjust
from 150° – 550°F. Convection oven adjusts from 175° – 550°F
and the optional nishing oven for standard ovens adjusts from
300° – 650°F. Standard oven supplied with one rack, convection
oven with two. Both ovens allow for three rack positions. Oven
door is heavy duty with counter weight door hinges. 11⁄4" diameter
front manifold and 11⁄4" rear gas connection, capped. Total input
45,000 BTU/hr.
Exterior Dimensions:
363⁄4"d x 36"w x 36"h on 6" adjustable legs
Cap and cover front manifold
Stainless steel oven cavity
650°F oven thermostat and steel hearth. (“S” models)
Fan cooling package (“C” models)
4" adjustable anged feet for modular models
Less legs for dolly mounting of “S”, “C”, & “B” models
3" high toe base for curb mounting
ACCESSORIES (Packaged & Sold Separately)
3
⁄4", 1", or 11⁄4" gas pressure regulator (specify gas type –
pack loose)
Set of 4 casters, 6" high (two locking)
6" adjustable anged feet for “S”, “C”, & “B” models
Extra removable shelves for use with Universal rack guides
(cabinet base)
Banking strip
Common condiment type, telescoping plate rails
(starting at 24" length)
10", 22", or 34" high back risers (no shelf)
22" single deck solid or o-thru high shelf risers
34" double deck solid or o-thru high shelf risers
Dolly frames
Flexible gas hose with quick disconnect & restraining device
a divisi on of IT W Food Equ ipme nt Group L LC
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
F37442 (08/11)
HEAVY DUTY COOKING
HEAVY DUTY GAS RANGE
RADIAL FIN FRENCH TOP / 36" WIDE GAS RANGE
INSTALLATION INSTRUCTIONS
1. A properly sized gas pressure regulator suitable for battery or
single unit application must be furnished and installed. Natural gas
6.0" W.C., propane gas 10.0" W.C.
2. An adequate ventilation system is required for commercial cooking
equipment. Information may be obtained by writing to the National
Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269,
www.NFPA.org. When writing, refer to NFPA No. 96.
3. These units are manufactured for installation in accordance with
ANSZ223.1A (latest edition), National Fuel Gas Code. Copies may
be obtained from The American Gas Association, 400 N Capitol St.
NW, Washington, DC 20001, www.AGA .org.
4. Clearances Rear Sides
Combustible 10" 10"
Non-combustible 0" 0"
5. For proper combustion, install equipment on adjustable legs or
casters. On curb or platform, allow 31⁄2" front overhang. Toe base
with leveling bolts are required for curb installation. Specify when
ordering.
6. Cannot be batteried with GH series equipment.
7. This appliance is manufactured for commercial installation only
and is not intended for home use.
NOTE: In line with its policy to continually improve its product, Vulcan
reserves the right to change materials and specications without notice.
Specify type of gas when ordering.
Specify altitude when above 2,00 0 feet.
TOP
CONFIGURATION
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
F37442 (08/11)
NOTE: In line with its policy to con tinua lly improve its pr oduct s, Vulca n rese rves th e right to change materi als and speci cati ons without not ice.
MODEL
NUMBER
V1FT 36 Radial Fin French Top / Modular 45,000 404 / 183
V1FT 36B Radial Fin French Top / Cabinet Base 45,000 504 / 229
V1FT 36S Radial Fin French Top / Standard Oven Base 95,000 685 / 311
V1FT 36C Radial Fin French Top / Convection Oven Base 77,000 763 / 346
This appliance is manufactured for commercial use only and is not intended for home use.
a divisi on of IT W Food Equ ipme nt Group L LC
DESCRIPTION
TOTAL INPUT
BTU / HR
SHIPPING WEIGHT
LBS / KG
Loading...