Vulcan V1FT18 User Manual

Item # C.S.I. Section 11420
HEAVY DUTY COOKING
HEAVY DUTY GAS RANGE
FRENCH TOP / 18" WIDE GAS RANGE
V1FT18 18" French Top / Modular
V1FT18B 18" French Top / Cabinet Base
STANDARD FEATURES
■ Stainless steel front, front top ledge, burner box, sides, base, and stub back
■ 11⁄4" diameter front gas manifold with 11⁄4" rear gas connection (capped)
■ 25,000 BTU/hr. burner (2 ring burner)
■ Individual pilots and controls for each burner
■ Polished cast iron French Top
■ 4" stainless steel stub riser
■ 6" adjustable stainless steel legs for cabinet base units (no legs for modular model)
■ Stainless steel cabinet base door
■ One year limited parts and labor warranty
Model V1FT18 B
(shown on cabinet base)
SPECIFICATIONS
18" wide heavy duty gas range, Vulcan Model No. V1FT18 (modular) and V1FT18B (cabinet base). Stainless steel front, sides, base, plate ledge, front top ledge with pull-out condiment rails, and stub back. 11⁄4" diameter front gas manifold and 11⁄4" rear gas connection, capped. Heavy polished cast iron French plate. 25,000 BTU/hr. heavy cast burner, two ring burners with individual pilots and controls for each burner. Total input 25,000 BTU/hr.
Exterior Dimensions:
363⁄4"d x 18"w x 36"h on 6" adjustable legs
OPTIONAL FEATURES
(Factory Installed)
Cap and cover front manifold
4" adjustable anged feet for modular models
Less legs for dolly mounting of cabinet base models
3" high toe base for curb mounting
Universal rack guides, with one shelf (shelf is removable)
ACCESSORIES
3
⁄4", 1", or 11⁄4" gas pressure regulator (specify gas type –
(Packaged & Sold Separately)
pack loose)
Set of 4 casters, 6" high (two locking)
6" adjustable anged feet for cabinet base models
Extra removable shelves for use with Universal rack guides (cabinet base)
Banking strip
10", 22", or 34" high back risers (no shelf)
22" single deck solid or o-thru high shelf risers
34" double deck solid or o-thru high shelf risers
Flexible gas hose with quick disconnect and restraining device
Common condiment type, telescoping plate rails (starting at 24" length)
Dolly frames
a divisi on of ITW Foo d Equipmen t Group LLC
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
F3 7431 ( 07/11)
INSTALLATION INSTRUCTIONS
HEAVY DUTY COOKING
HEAVY DUTY GAS RANGE
FRENCH TOP / 18" WIDE GAS RANGE
1. A properly sized gas pressure regulator suitable for battery or single unit application must be furnished and installed. Natural gas
6.0" W.C., propane gas 10.0" W.C.
2. An adequate ventilation system is required for commercial cooking equipment. Information may be obtained by writing to the National Fire Protection Association, 1 Batter ymarch Park, Quincy, MA 02269, www.NFPA.org. When writing, refer to NFPA No. 96.
3. These units are manufactured for installation in accordance with ANSZ223.1A (latest edition), National Fuel Gas Code. Copies may be obtained from The American Gas Association, 400 N Capitol St. NW, Washington, DC 20001, www.AGA.org.
4. Clearances Rear Sides
Combustible 10" 10" Non-combustible 0" 0"
5. For proper combustion, install equipment on adjustable legs or casters. On curb or platform, allow 31⁄2" front overhang. Toe base with leveling bolts are required for curb installation. Specify when ordering.
6. Cannot be batteried with GH series equipment.
7. This appliance is manufactured for commercial installation only and is not intended for home use.
NOTE: In line with its policy to continually improve its product, Vulcan reserves the right to change materials and specications without notice.
Specify type of gas when ordering.
Specify altitude when above 2,000 feet.
TOP
CONFIGURATION
P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: 1-800-444-0602
F3 7431 ( 07/11)
NOTE: In line with its policy to continual ly improve its products , Vulcan res erves the r ight to change materials and specications without not ice.
MODEL
NUMBER
V1FT18 18" French Top / Modular 25,000 220 / 110
V1FT18B 18" French Top / Cabinet Base 25,000 285 / 129
a divisi on of ITW Foo d Equipmen t Group LLC
DESCRIPTION
TOTAL INPUT
BTU / HR
SHIPPING WEIGHT
LBS / KG
Loading...