Vulcan SPS620V User Manual

Item # _____________________________

C.S.I. Section 11420

ScaleBlocker

™

WATER FILTER SYSTEM

■ SPS600V

■ SPS620V

STANDARD FEATURES

■ Single cartridge design.

■ Patented technology reduces limescale without chemicals

or additives.

■ Reduces the need for deliming.

■ Mounting bracket with clear lter housing and red cap.

■ Shut off valve and pressure gauge.

■ Incoming water parameter:

pH 6-9 Alkalinity ppm 80 - 100 Chlorine ppm 0 - 4 Hardness ppm 0 - 300

■ 3⁄4 NPTF inlet and outlet.

■ Shut off valve with cold water 1/4" compression connection

for unltered connection.

■ Water pressure gauge.

■ Water ow meter with reminder setting.

A2780

ISO9001

Vulcan-Hart Co.

MODELS: SCALEBLOCKER

SPECIFICATIONS:

Water lter system, Vulcan-Hart Model No. SPS___V. Single cartridge design. Patented technology reduces limescale without chemicals or additives. Reduces the need for deliming. Mounting bracket with clear lter housing and red cap. Shutoff valve and gauge. Incoming water parameters are pH 6 - 9, Alkalinity ppm 80 - 100, Chlorine ppm 0 - 4, Hardness ppm 0 - 300. 3⁄4 NPTF inlet and outlet.

Exterior dimensions:

SPS600V: 14"w x 10"d x 181/2"h. SPS620V: 14"w x 10"d x 28"h.

NSF tested and certied.

™

Water Filter System

F-32428 (06-04)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028

502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602

SPS600V

ScaleBlocker

™

WATER FILTER SYSTEM

NOTES:

1. Dimensions which locate the below connections have a tolerance of + or - 3" (+ or - 77mm).

SPS600V

Service Flow 0-2 GPM Service Life 7,500 Gal Inlet / Outlet 3/4" NPT F Inlet Min / Max Pressure 40-125 PSIG Min / Max Temperature 45-100F (7-37C) Weight, Operating 21 Lbs. (9.5 kg)

SPS620V

Service Flow 0-4 GPM Service Life 12,000 Gal Inlet / Outlet 3/4" NPT F Inlet Min / Max Pressure 40-125 PSIG Min / Max Temperature 45-100F (7-37C) Weight, Operating 32 Lbs. (15.5 kg)

2. Installation of backow preventers, vacuum breakers, other code requirements and local code compliance is the responsibility of the owner and installer.

3. Filter clearance needed for access:

Front 13" Bottom 4"

4. Plastic drains are not recommended due to inherent limited temperatures of the plastic. Boiler purge temperatures may exceed 180°F. The installer may be required to provide means to reduce boiler purge water temperatures to be that of condensate temperature of 140°F or below.

5. This appliance is manufactured for commercial installation only and not intended for home use.

WATER QUALITY STATEMENT:

Water from ScaleBlocker™ System should only be connected to the boiler / generator feed and not the condenser connection of the steamer. Systems are not to be used where water is micro biologically unsafe or with water of unknown quality without adequate disinfections before and after use. Connecting to a

SPS620V

NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and

specications without notice.

F-32428 (06-04)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028

502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602

municipal water supply complies with this requirement.