Vulcan ICM36 User Manual

Item#

A2780

ISO9001

Vulcan-Hart

C.S.I. Section 11420

ICM SERIES

GAS INFRARED CHEESEMELTER

BASIC MODELS:

□ICM36 36” wide

□ICM48 48” wide

MODEL ICM36



CSA design certified. NSF listed.

SPECIFICATIONS:

Gas infrared cheesemelter, Vulcan-Hart Model No.
Stainless steel front, sides and top. Aluminized steel
Interior and exterior bottom. Infrared burner pre-heats
in 60 seconds. Three position rack guides and one
chrome plated wire shelf. Manual controls. ¾” gas
connection with pressure regulator.

Exterior dimensions “w x 17½”d x 21¼”h.

□ICM60 60” wide
□ICM72 72” wide



STANDARD FEATURES:

■ Stainless steel front, sides and top.

■ Aluminized steel interior and exterior bottom.

■ Infrared burners pre-heat in 60 seconds.

■ Three position rack guides and one chrome plated

wire shelf.

■ Center shelf support (ICM60 and ICM72 models only)

■ Manual controls

■ Standing pilot ignition system.

■ ¾” rear gas connection and gas pressure regulator

■ One year limited parts and labor warranty

OPTIONS:

■ Stainless steel interior and exterior bottom.

■ Stainless steel drip pan.

■ 4” chrome legs with adjustable feet

■ Wall mounting bracket



MODEL: ICM SERIES

GAS INFRARED CHEESEMELTER

SPECIFYTYPEOFGASANDFINISHWHENORDERING.
SPECIFYALTITUDEWHENABOVE2,000FT.

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

F-32158 (06-09)

502-778-2791 QUOTE & ORDER FAX: [phone]

Item#

A

C.S.I. Section 11420



IMPORTANT:

1. A gas pressure regulator supplied with the unit must
be installed;
Natural Gas 5.0” (127 mm) W.C.
Propane Gas 10.0” (254 mm) W.C.

2. An adequate ventilation system is required for commercial cooking
equipment. Information may be obtained by writing to the
National Fire Protection Association, Batterymarch Park, Quincy,
MA 02269. When writing refer to NFPA No. 96.

3. These units are manufactured for installation in accordance with
National Fuel Gas Code, ANSI-Z223.1/NFPA #54 (latest edition).
Copies may be obtained from The American Gas Association,
Accredited Standards Committee Z223 @ 400 N. Capital St. NW,
Washington,DC 20001, or the Secretary Standards Council, NFPA,
1 Batterymarch Park, Quincy, MA 02169-7471.

NOTE: In The Commonwealth of Massachusetts

ll gas appliances vented through a ventilation hood or exhaust system
equipped with a damper or with a power means of exhaust shall
comply with 248 CMR.



ICM SERIES

GAS INFRARED CHEESEMELTER

This appliance is manufactured for commercial installation only and
is not intended for home use.

NOTE: This appliance must be installed with a 6” clearance at both
sides adjacent to combustible construction.

INSTALLATION VARIATIONS:

1. Cheesemelter may be installed on a non-combustible surface
without legs.

2. Cheesemelter may be installed with 4” legs. Legs are optional
and may be installed in the field.

3. Cheesemelter may be wall mounted on a combustible wall in
accordance with National Fuel Gas Code ANSZ233.1 -1988.
(Order with optional wall mounting kit).



V

IS
O

9001

A
2780



Exterior

Dimensions

Model No. (w x d x h) (w x d x h) BTU/hr. Burners Racks Wt.(lbs./kg)

ICM36

ICM48

ICM60

ICM72

NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and specifications without notice.

36" X 17½" X 21¼" 33⅝" X 14" X 8⅝ 35,000 1 1 150/68

48" X 17½ X 21¼" 45⅝" X 14" X 8⅝ 40,000 2 1 194/88

60" X 17½ X 21¼" 57⅝" X 14" X 8⅝ 55,000 2 1 238/108

72" X 17½ X 21¼" 69⅝" X 14" X 8⅝ 70,000 2 1 278/126

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

F-32158 (06-09)

502-778-2791 QUOTE & ORDER FAX: [phone]

Interior

Dimensions

Approx.

No. of No. of

Ship