Vulcan GL40 User Manual

Item # __________________________

C.S.I. Section 11420

GS, GL, GT SERIES

GAS FULLY JACKETED KETTLE

STANDARD FEATURES

■ Kettle fully steam jacketed.

■ Mounted on stainless steel 2" diameter legs with adjustable

flange feet.

■ Stainless steel dome shaped spring assist cover with drop type
handle.

■ Kettle interior bottom sloped to front for smooth product flow
through a mounted, tapered, plug type food product draw-off
valve of standard 2" diameter.

■ Draw-off opening strainer.

■ Graduated measuring rod.

■ 15 PSI relief valve.

■ Vacuum pressure relief valve.

■ Thermostat with a combination gas control valve and elec-

tronic ignition.

■ Low water cut-off control.

■ Pressure limit switch and pressure gauge.

■ Faucet bracket.

■ One year limited parts and labor warranty.

Vulcan-Hart Co.

ISO9001

A2780

MODELS: GS, GL, GT SERIES

GL40 40 gallons 151 liters
GS60 60 gallons 227 liters
GL80 80 gallons 303 liters
GT100 100 gallons 379 liters
GT125 125 gallons 473 liters
GT150 150 gallons 568 liters

SPECIFICATIONS:

Gas fully jacketed stationary kettle, Vulcan Model No. ________.
Kettle is mounted on 2" diameter legs with adjustable flanged
feet. Cover to be stainless steel dome shaped with drop type
handle and insulated knob. The dish shaped interior bottom is
sloped to the front for a smooth product flow through a mounted,
tapered, 2" plug type food product draw-off valve. Draw-off
includes opening strainer. Graduated measuring rod. Furnished
standard with a 15 PSI relief valve, vacuum relief valve, thermo­stat with a combination gas control valve and electronic ignition,
low water cut-off control and a pressure limit switch and pressure
gauge.

CSA design certified. Classified by U L to NSF Std. #4. Meets
ASME code.

OPTIONS

■■ 3" compression type draw-off valve in place of 2".

■■ Change in leg height to increase clearance under draw-off

valve.

■■ Condensate ring on cover hinges.

■■ Swing drain collector.

■■ 316 stainless steel jacket liner

■■ Second year extended limited parts and labor warranty.

ACCESSORIES

■■ Stainless steel draw-off extension tube.

■■ (12") (18" double jointed) single pantry faucet.

■■ (12") (18" double jointed) double pantry faucet.

■■ Double pantry washdown hose with 16" add-on faucet with

backflow preventer.

■■ Double pantry washdown hose with backflow preventer.

■■ Double pantry pot filler and backflow preventer.

■■ Rotating tri-basket assembly.

■■ Clean-up kit to include draw-off brush, clean-up brush with

36" handle and paddle scraper with 40" handle.

■■ 48" stainless steel whip.

Gas Fully Jacketed Kettle

F-31643 (07-07)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

502-778-2791 QUOTE & ORDER FAX: [phone]

GS, GL, GT SERIES

GAS FULLY JACKETED KETTLES

IMPORTANT:

1. A pressure regulator sized for this unit is included. Natural
gas 8.0" W.C. Propane 10.5" W.C.

2. Gas line connecting to unit must be
are used, the inside diameter must be at least the same as the 3/4" iron
pipe and rated for the correct gas input.

3. Requires 120 volt, 60 Hz, 1 phase electrical connection. 3 amp total
draw.

4. An adequate ventilation system is required for commercial cooking
equipment. Information may be obtained by writing to the National
Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
When writing refer to NFPA No. 96.

5. These units are manufactured for installation in accordance with
ANSZ223.1a (latest edition), National Fuel Gas Code. Copies may be
obtained from the American Gas Association. 1515 Wilson Blvd.,
Arlington, VA 22209.

6. Equipment Clearance: Combustible Non-Combustible
Rear 2" 0"
Right 0" 0"
Left 0" 0"

3

/4" or larger. If flexible connectors

BRIMFUL CAPACITIES:

Model Gallons Quarts Liters 4 oz. svgs.

GL40 40 160 152 1280
GS60 60 240 227 1920

GL80 80 320 303 2560
GT100 100 400 379 3200
GT125 125 500 473 4000
GT150 150 600 568 4800

SERVICE CONNECTIONS:

3

Gas Supply:

Electric Connection: 120-1 Circuit, 0.3 KW, 16 AFF.

Water: Faucet location.

NOTE:

• Dimensions which locate the above connections have a tolerance of +
or -3" (+ or -75 mm).

• Installation of backflow preventers, vacuum breakers and other specific
code requirements is the responsibility of the owner and installer. It is
the responsibility of the owner and installer to comply with local codes.

• Plastic drains are not recommended due to inherent limited tempera­tures of the plastic.

• This appliance is manufactured for commercial installation only and is
not intended for home use.

/4" NPT, 6" AFF, Volume per schedule.

MODEL CAPACITY A B C D E F G BTU/hr. INPUT

GL40 40 gal., 151 liters 29 (737) 48 (1219) 41 (1041) 38 (965) 14 (356) 40 (1016) 71 (1803) 105,000

GS60 60 gal., 227 liters 361/2 (927) 581/2 (1486) 48 (1219) 44 (1118) 17 (432) 39 (991) 78 (1981) 135,000

GL80 80 gal., 303 liters 361/2 (927) 581/2 (1486) 48 (1219) 44 (1118) 17 (432) 44 (1118) 83 (2108) 135,000

GT100 100 gal., 379 liters 361/2 (927) 581/2 (1486) 48 (1219) 44 (1118) 17 (432) 49 (1245) 88 (2235) 135,000

GT125 125 gal., 473 liters 361/2 (927) 581/2 (1486) 48 (1219) 44 (1118) 17 (432) 56 (1422) 95 (2413) 135,000

1

GT150 150 gal., 568 liters 36

/2 (927) 581/2 (1486) 48 (1219) 44 (1118) 17 (432) 621/2 (1587) 101 (2565) 135,000

NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.

F-31643 (07-07)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

502-778-2791 QUOTE & ORDER FAX: [phone]

Printed On Recycled Paper