Vulcan GH72S User Manual

Item # __________________________

MODEL GH72

EVEN HEAT TOP HEAVY DUTY GAS RANGE

GH72 Standard Oven
GH72C Convection Oven
GH72S Storage Base

STANDARD FEATURES

Stainless steel body and 6" adjustable legs.

1

1

⁄4" diameter front gas manifold.

Tw o polish ed ca st ir on ho t top section s m easur e
17"w x 23
20,000 BTU/hr. burners, two per hot top section. One man­ual gas control valve per section. Pilot ignition system.

Oven controls located in the cool zone.

Oven interior measures 26"w x 28"d x 14"h. Porcelain enamel
on steel hearth, door and side liners. One oven rack and two
rack positions. 50,000 BTU/hr. "Flame Retention" burner with
pilot ignition. Thermostat adjusts from 150° to 500°F.

One year limited parts and labor warranty.

13

⁄16 "d. Ceramic re brick under hot tops. Four

C.S.I. Section 11420

0872A

1009OSI

.oC traH-nacluV

Model GH72 shown with single deck high shelf

SPECIFICATIONS

Heavy duty even heat top gas range with oven, Vulcan-Hart
Model No. GH72. Stainless steel body and 6" adjustable legs.

1

1

⁄4" diameter front gas manifold. Two polished cast iron hot
top sections measure 17"w x 23
hot tops. Four 20,000 BTU/hr. burners, two per hot top section.
One manual gas control valve per section. Pilot igntion system.
Oven interior measures 26"w x 28"d x 14"h. Porcelain enamel on
steel hearth, door and side liners. One oven rack and two rack
positions. 50,000 BTU/hr. heavy cast "Flame Retention" burner
with pilot ignition. Thermostat adjusts from 150° to 500°F.
Controls located in the cool zone.

Exterior dimensions: 34"w x 39
6" legs.

CSA design certied. NSF listed.

SPECIFY TYPE OF GAS AND FINISH WHEN ORDERING.

SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.

13

⁄16 "d. Ceramic re brick under

1

⁄8"d x 36" working height on

OPTIONS

SnorkelTM convection oven in place of standard oven. Add
sux "C" to the model number. Porcelain enamel on steel
interior measures 261⁄8"w x 223⁄32 "d x 141⁄8"h. Three oven racks
and ve rack positions. 32,000 BTU/hr. burner with pilot
ignition. Thermostat adjusts from 200° to 500°F. 1⁄4 HP blower
motor with 7 foot power cord and plug. 120/60/1, 5 amps.

Stainless steel back nishing panel.

Common front top ledge up to 68" wide. (Not for use on griddle
tops, spreader plates and deep fat fryers.)

Cap and cover manifold end(s). (No charge.)

5

1

/8" stainless steel toe base - 315⁄8" working height.

Set of four 5" diameter casters, two locking.

Stainless steel dolly frame with casters, up to 102" wide.

Cooling fan for Snorkel
when unit is installed with a back nishing panel or a toe base.

Rear gas connection. (Reference spec sheet F-31525.)

Second year extended limited parts and labor warranty.

Cabinet storage base in place of standard oven. Add the
suux “S” to the model number.

TM

convection oven motor. Required

M
O
D

E
L

:

G
H

7
2

E
v

e
n

H
e

a
t

T
o

p

H
e

a
v

y

D
u

t
y

G
a

s

R
a

n
g
e

F-31515 (05-06)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

502-778-2791 QUOTE & ORDER FAX: [phone]

MODEL GH72

EVEN HEAT TOP HEAVY DUTY GAS RANGE

ACCESSORIES

17" high stainless steel backguard. (Common backguards
available up to 102" wide.)

23" high stainless steel single deck high shelf. (Common high
shelves available up to 72" wide.)

35" high stainless steel double deck high shelf. (Common high
shelves available up to 72" wide.)

Additional oven rack(s).
Gas pressure regulator (specify size and type of gas).
Flexible gas hose with quick disconnect and restraining

device. Consult price book for available sizes.

LESS LEGS

IMPORTANT

1. A gas pressure regulator suitable for battery or single unit
application must be furnished and installed. Natural gas 6.0"
W.C., propane gas 10.0" W.C.

2. An adequate ventilation system is required for commercial
cooking equipment. Information may be obtained by writing to
the National Fire Protection Association, Batterymarch Park,
Quincy, MA 02269. When writing refer to NFPA No. 96.

3. These units are manufactured for installation in accordance
with ANSZ223.1a (latest edition), National Fuel Gas Code.
Copies may be obtained from the American Gas Association,
1515 Wilson Blvd., Arlington, VA 22209.

4. All models require a 6" (152 mm) clearance at both sides and
rear adjacent to combustible construction.

5. For proper ueing a backguard or high shelf must be installed
with each unit. Please refer to spec sheet F31537 for specic
styles and sizes.

6. This appliance is manufactured for commercial installation
only and is not intended for home use.

GH72 & GH72C

TOP VIEW

FRONT VIEW

GH72

SIDE VIEW

GH72C

SIDE VIEW

MODEL

GH72

GH72C

GH72S

TOP: 80,000

TOP: 80,000

TOP: 80,000

GAS RATED INPUT BTU/hr.

OVEN: 50,000

OVEN: 32,000
____________

TOTAL: 130,000

TOTAL: 112,000

TOTAL: 80,000

WIDTH

34

HEIGHT WKG. HEIGHT

"

1

⁄8" 36"

39

APPX. SHP. WT.

630 lbs./286 kg

690 lbs./313 kg

UNKNOWN

NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specications without notice.

F-31515 (05-06)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

502-778-2791 QUOTE & ORDER FAX: [phone]

Printed On Recycled Paper