Vulcan GH72-45S User Manual

Item # __________________________
C.S.I. Section 11420
COMBINATION EVEN HEAT TOP & OPEN BURNER HEAVY DUTY GAS RANGE
GH72/45 Even Heat Top on Left, Two 30,000 BTU/hr.
Open Burners on Right, With Standard Oven.
GH72/45C Even Heat Top on Left, Two 30,000 BTU/hr.
Open Burners on Right, With Convection Oven.
GH72/45S Even Heat Top on Left, Two 30,000 BTU/hr.
Open Burners on Right, With Storage Base.
Shown with single deck high shelf
SPECIFICATIONS
Heavy duty combination even heat top and open burner gas range with oven, Vulcan-Hart Model No. (GH72/45). Stainless steel body and 6" adjustable legs. 1
One polished cast iron hot top section measures 17"w x 23
Ceramic re brick under hot top. Two 20,000 BTU/hr. burners and one manual gas valve control. Two 30,000 BTU/hr. two piece "Flame Retention" burners. Heavy cast iron aeration plates with deep bowls and removable cast top grates. Indi­vidual pilot light for each burner. Oven interior measures 26"w x 28"d x 14"h. Porcelain enamel on steel hearth, door and side liners. One oven rack and two rack positions. 50,000 BTU/hr. heavy cast "Flame Retention" burner with pilot ignition. Thermostat adjusts from 150° to 500°F. Controls located in the cool zone.
Exterior dimensions: 34"w x 39 6" legs.
CSA design certied. NSF listed.
SPECIFY TYPE OF GAS AND FINISH WHEN ORDERING.
SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.
Model GH72/45
1
4" diameter front gas manifold.
1
8 "d x 36" working height on
13
16
"d.
STANDARD FEATURES
Stainless steel body and 6" adjustable legs.
11⁄4" diameter front gas manifold.
Two 30,000 BTU/hr. two piece "Flame Retention" burners. Heavy cast iron aeration plates with deep bowls and removable cast top grates.
One pol ished cast ir on ho t top se ction measures 17"w x 23 20,000 BTU/hr. burners and one manual gas control valve.
Individual pilot light for each burner.
Oven controls located in the cool zone.
Oven interior measures 26"w x 28"d x 14"h. Porcelain enamel on steel hearth, door and side liners. One oven rack and two rack positions. 50,000 BTU/hr. "Flame Retention" burner with pilot ignition. Thermostat adjusts from 150° to 500°F.
One year limited parts and labor warranty.
OPTIONS
Convection oven in place of standard oven. Add sux “C” to the model number.
Cabinet base in place of standard oven. Add sux “S” to
the model number.
Stainless steel back nishing panel.
Common front top ledge up to 68" wide. (Not for use on griddle tops, spreader plates and deep fat fryers.)
Cap and cover manifold end(s). (No charge.)
15⁄8" stainless steel toe base - 315⁄8" working height.
Set of four 5" diameter casters, two locking.
Stainless steel dolly frame with casters, up to 102" wide.
Rear gas connection. (Reference spec sheet F-31525.)
Second year extended limited parts and labor warranty.
13
16 "d. Ceramic re brick under hot top. Two
.oC traH-nacluV
1009OSI
M O D
E L
:
G H 7
2 /
4 5
C o
m b
i
n a t
i
o n
E v
e n
H e
a t
T o
p &
O p
e n
B u
r n
e r
H e
a v
y
D u
t y
G a
s
R a
n g e
0872A
F-31516 (05-06)
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
COMBINATION EVEN HEAT TOP & OPEN BURNER HEAVY DUTY GAS RANGE
ACCESSORIES
17" high stainless steel backguard. (Common backguards available up to 102" wide.)
23" high stainless steel single deck high shelf. (Common high shelves available up to 72" wide.)
35" high stainless steel double deck high shelf. (Common high shelves available up to 72" wide.)
Additional oven rack(s). Gas pressure regulator (specify size and type of gas). Flexible gas hose with quick disconnect and restraining
device. Consult price book for available sizes.
IMPORTANT
1. A gas pressure regulator suitable for battery or single unit application must be furnished and installed. Natural gas 6.0" W.C., propane gas 10.0" W.C.
2. An adequate ventilation system is required for commercial cooking equipment. Information may be obtained by writing to the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269. When writing refer to NFPA No. 96.
3. These units are manufactured for installation in accordance with ANSZ223.1a (latest edition), National Fuel Gas Code. Copies may be obtained from the American Gas Association, 1515 Wilson Blvd., Arlington, VA 22209.
4. All models require a 6" (152 mm) clearance at both sides and rear adjacent to combustible construction.
5. For proper ueing a backguard or high shelf must be installed with each unit. Please refer to spec sheet F31537 for specic styles and sizes.
6. This appliance is manufactured for commercial installation only and is not intended for home use.
LESS LEGS
GH72/45 SIDE VIEW
TOP VIEW
GH72/45 FRONT VIEW
MODEL
GH72/45
GH72/45C
GH72/45S
TOP: 100,000
TOP: 100,000
TOP: 100,000
GAS RATED INPUT BTU/hr.
OVEN: 50,000
OVEN: UNKNOWN
___________
TOTAL: 150,000
TOTAL: UNKNOWN
TOTAL: 100,000
WIDTH
34"
34"
34"
DEPTH
1
39
1
39
1
39
"
8
"
8
"
8
MODEL
WKG. HEIGHT
34"
34"
34"
APPX. SHP. WT.
600 lbs./272kg.
UNKNOWN
UNKNOWN
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and specications without notice.
F-31516 (05-06)
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
Printed On Recycled Paper
Loading...