Vulcan 924A User Manual
Item # __________________________
900 SERIES
HEAVY-DUTY GAS GRIDDLES
3
■■ 924A 24" w x 23
■■ 936A 36" w x 23
■■ 948A 48" w x 23
■■ 960A 60" w x 23
■■ 972A 72" w x 23
/4" d griddle plate
3
/4" d griddle plate
3
/4" d griddle plate
3
/4" d griddle plate
3
/4" d griddle plate
C.S.I. Section 11420
Shown with optional stand
SPECIFICATIONS:
Heavy-duty gas griddle, Vulcan-Hart model ______________.
Stainless steel front and sides. _____" w x 23
3
/4" d x 1" thick
polished steel griddle plate welded to stainless steel side and
back splashers. One 30,000 BTU/hr. aluminized steel burner and
120 volt snap acting thermostat for each 12" of griddle width.
Temperature adjusts from 150°F to 450°F. Knobs recessed for
protection. 3
Large capacity 1
3
/8" wide polished stainless steel front grease trough.
3
/4 gallon stainless steel grease drawer with
anti-splash baffles. 4" stainless steel legs with adjustable feet.
3
⁄4" rear gas connection and internal gas pressure regulator
(Natural gas 4.5" W.C., Propane gas 10.0" W.C.). 120 volt control
circuit, 4 foot cord with 3 prong plug.
Exterior dimensions: ____" w x 30
legs. 15
1
/4" working height.
1
/2" d x 19" h on 4" adjustable
STANDARD FEATURES
■ Stainless steel front and sides.
■ 1" thick polished steel griddle plate welded to stainless steel
side and back splashers.
■ One 30,000 BTU/hr. aluminized steel burner and 120 volt snap
acting thermostat for each 12" of griddle width. Temperature
adjusts from 150°F to 450°F. Knobs recessed for protection.
3
/8" wide polished stainless steel front grease trough.
■ 3
■ Large capacity 13/4 gallon stainless steel grease drawer with
anti-splash baffles. (Model 972A has two grease drawers.)
■ 4" stainless steel legs with adjustable feet.
3
/4" rear gas connection and internal gas pressure regulator.
■
120 volt, 50/60 Hz, 5 amp control circuit, four foot cord with
3 prong plug.
■ One year limited parts and labor warranty.
OPTIONS
■■ Chrome-plated cooking surface.
■■ Electric pilot ignition.
■■ Solid state temperature controls.
■■ Full width cutting board, 7" deep (not available with towel bar).
■■ Stainless steel stand with casters.
■■ Set of 4" casters, two locking swivel.
■■ Second year extended limited parts and labor warranty.
Vulcan-Hart Co.
ISO9001
A2780
MODEL: 900 SERIES
Heavy-Duty Gas Griddles
SPECIFY TYPE OF GAS AND FINISH WHEN ORDERING.
SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
F-31573 (6-04)
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
900 SERIES
HEAVY-DUTY GAS GRIDDLES
900A SERIES SPECIFICATIONS With FRONT GREASE TROUGH
GRIDDLES
Overall Width 24" 36" 48" 60" 72"
Overall Depth 30
1
/2"30
1
/2"30
1
/2"30
1
/2"30
1
/2"
Overall Height (Counter) 19" * 19" * 19" * 19" * 19" *
Working Height (Counter) 15" * 15" * 15" * 15" * 15" *
Working Height (With Stand) 34" * 34" * 34" * 34" * 34" *
Griddle Plate Width 23
7
/8"35
7
/8"47
7
/8"59
7
/8"71
7
/8"
Griddle Plate Depth 24" 24" 24" 24" 24"
Griddle Plate Thickness 1" 1" 1" 1" 1"
Number of Burners 23456
BTU/hr. Input Per Burner 30,000 30,000 30,000 30,000 30,000
Total BTU/hr. Input 60,000 90,000 120,000 150,000 180,000
Number of Thermostats 23456
Number of Drawers 11112
Grease Capacity of Drawer(s) 1
3
/4 Gal. 13/4 Gal. 13/4 Gal. 13/4 Gal. 31/2 Gal.
Effective Cooking Area **496 sq. in. **784 sq. in. **1072 sq. in. **1360 sq. in. **1684 sq. in.
Thermostat Dial Marking OFF to 450°F OFF to 450°F OFF to 450°F OFF to 450°F Off to 450°F
1
*These are nominal dimensions, they can be varied by plus 2
/2" with adjustable legs.
**Based on a griddle surface temperature within controllable thermostat dial setting and with front grease trough.
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.
F-31573 (6-04)
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
Printed On Recycled Paper
Loading...