Vulcan 1TR85A User Manual

FRYERS

FREE STANDING GAS FRYER

Model 1TR85A

SPECIFICATIONS

85 - 90 lbs. capacity free standing gas fryer, Vulcan-Hart Model
No. (1TR85A) (1TR85D) (1TR85C). 90,000 BTU/hr. input. Stainless
steel cabinet. Set of four 6" adjustable casters (2 locking).
Stainless steel fry tank with ThreePass™ heat transfer system.
Energy Star® qualied. SoftStart™ ignition system using 45,000
BTU/hr. to extend oil life during start up. Idle rate of 5,575 BTU/hr.
to maintain cooking temperature. 11⁄4" port ball type drain valve.
Twin fry baskets with plastic coated handles. Solid state analog
knob control, digital, or programmable computer control systems
all standard with electronic matchless ignition. Tank brush and
clean-out rod included.

Overall dimensions:

21"w x 343⁄8"d x 471⁄8"h. Working height 361⁄4".

CSA design certied. NSF listed.

SPECIF Y TYPE OF GAS WHEN ORDERING

Natural Gas.
Propane Gas.

SPECIFY ALTITUDE

The 1TR85 Series fryer does not require any special adjustments
for varying altitudes ranging from 0 - 10,000 feet for either Natural
or Propane gas.

Item # C.S.I. Section 11420

1TR85 SERIES

1TR85A: Solid state analog knob control behind the door. Accu-

rate temperature control 200° to 390°F. User selectable
fat melt modes. Electronic ignition.

1TR85D: Accurate temperature control 200-390°F with digital

display. Fast recovery. Cook with compensating time
or actual time. Electronic ignition. Digital temperatures:
Fahrenheit or Celsius. Three melt modes. Two count­down timers. Auto boil-out mode.

1TR85C: Programmable computer controls with digital character

display. 10 menu timers display product name and
cook times. Ofine programming of menu items
uploaded through USB interface, software included.
Accurate temperature control 200-390°F with digital
display. Fast recovery. Cook with compensating time
or actual time. Electronic ignition. Digital temperatures:
Fahrenheit or Celsius. Three melt modes.

STANDARD FEATURES

■ 90,000 BTU/hr. input.

■ Maintains idle temperature setting with only 5,575 BTU/hr. to
save ene rgy.

■ Energy saving SoftStart™ ignition system extends oil life while
requiring lower BTU’s.

■ Energy Efcient ThreePass™ heat transfer system yielding

60.0% cooking efciency and 72% Thermal Efciency.
ENERGY STAR® qualied.

■ Stainless steel fry tank, 85 - 90 lb. capacity. Includes 10 year
limited tank warranty.

1

■ 1

⁄

" port ball type drain valve.

4

■ Stainless steel cabinet.

■ Set of four 6" adjustable (2 locking) casters.

■ Twin fry baskets with plastic coated handles.

■ Hi-limit shut-off.

■ Electronic matchless ignition.

■ Tank brush and clean-out rod.

■ One year limited parts and labor warranty.

ACCESSORIES

FRYMATE-VX21S add-on frymate.
Stainless steel tank cover – doubles as a work surface top.
Connecting Kit(s) – Connects two fryers together (brackets,

grease strip and hardware included).
Single large basket – 183⁄4"w x 171⁄4"d x 51⁄2"h.
Set of twin baskets – 83⁄4"w x 163⁄4"d x 6"h.

3

⁄4" Flexible gas hose with quick disconnect.

10" high stainless steel removable splash guard.

OPTIONS

Second year extended limited parts and labor warranty

a divisi on of ITW Food Equip ment Gro up LLC

P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: [phone]

F45383 (06/15)

INSTALLATION INSTRUCTIONS

FRYERS

1TR85 SERIES

FREE STANDING GAS FRYER

1. An exterior gas regulator has been installed on the incoming gas
manifold of the fryer and has been preset at the factory for the
specic gas type – Natural or Propane Gas.

• Natural Gas 8.0" (203 mm) W.C.

• Propane Gas 11.0" (279 mm) W.C.

2. An adequate ventilation system is required for Commercial Cooking
Equipment. Information may be obtained by writing to the National
Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
When writing refer to NFPA No. 96.

3. All models require a 6" (152 mm) clearance at both sides and rear
adjacent to combustible construction.All models require a 16"
(407 mm) minimum clearance to adjacent open top burner units.

4. This appliance is manufactured for commercial installation only and
is not intended for home use.

SERVICE CONNECTIONS:

1⁄2" (13 mm) ID and 3⁄4" (19 mm) OD rear gas connection.

NEMA 5-15P 120 Volt cord & plug supplied with fryers.

NOTE: In line with its policy to continually improve its product,
Vulcan reserves the right to change materials and specications
without notice.

MODEL Width Depth

1TR85 A
1TR85 D
1TR85 C

21" 343⁄8" 471⁄8" 361⁄4" 191⁄2" x 181⁄4" 90,000 85 - 90 lbs. 256 lbs.

Overall

Height

Working

Height Tan k Si z e BTU/hr.

Fry Comp.

Capacity

Approx.

Shipping Weight

This appliance is manufactured for commercial use only and is not intended for home use.

a divisi on of ITW Food Equip ment Gro up LLC

P.O. Box 696 ■ Louisville, KY 40201 ■ Toll-free: 1-800-814-2028 ■ Local: 502-778-2791 ■ Quote & Order Fax: [phone]

F45383 (06/15)