Vtron C-DX607, C-DX803, C-DX505, C-DX805, CF-DX603 User Manual
...
User Manual
Visionpro® C Series Display Cube
V1.4
VTRON
http :// www.vtron.com
E-Mail: info @ vtron.com
All rights reserved
User Manual Visionpro
®
C Series Display Cube
- -
i
This manual is the copyright property of VTRON. Without the prior written consent of
VTRON, no part of the text or graphics in this manual shall be copied or distributed to
any party in any manner.
This product may allow you to use third party software or upload/download works
belonging to a third party, including articles, images, video, or software, but VTRON
does not own or provide such works. Your use of the aforementioned works belonging to
a third party means that you agree to use such works without infringing or breaching the
rights of the third party, and VTRON does not assume any liability for your use thereof.
VTRON and Visionpro® are the global registered trademarks of VTRON Company.
This manual is subject to change due to technical upgrades without prior notice.
Note: Images in this manual are for description and reference only. For actuality and
details, please refer to the product you received.
Note:
Texts and graphics in this manual are for providing an introduction to the
Visionpro® series display cubes offered by VTRON only. Product configurations
and functions will be in accordance with the purchase contracts signed by the
customer. The functions and display interface of the product you order might differ
from those in this manual. This is due to the difference in configuration between
the one you purchased and the one introduced in this manual.
Statement:
Products as introduced in this manual are Class B products that may cause
radio interference in domestic environment. Practical measures should be taken
when necessary.
User Manual Visionpro
®
C Series Display Cube
- -
ii
Before operating Visionpro® series display cubes, please read and observe the
following safety precautions thoroughly.
Ensure proper grounding(grounded as indicated in
the figure)
The product should be grounded properly. Otherwise, a
series of problems will occur: serious system fault,
system instability and unreliability, and even the
paralysis to the whole system. Even worse, the safety of
users cannot be ensured.
Do not change the original design
Any addition to or deletion from any mechanical part
or electrical circuit in this product is prohibited.
VTRON will not assume any liability resulting
therefrom.
Do not install unauthorized software
The Visionpro® series display cube is a dedicated
device and must not be used for any other purpose.
Consult VTRON or a designated agent for the
installation of your own software. VTRON will not
assume any liability resulting therefrom.
Grounding (connected to earth)
●
Safety Precautions
!
User Manual Visionpro
®
C Series Display Cube
- -
iii
Be sure to disconnect the power supply before
the following operations:
A. Removal or reinstallation of any part of the
product.
B. Disconnection or reconnection of any electrical
connector or other connector in this product.
Keep the display cube away from corrosive
chemical gas or agent
Corrosive chemical gases or agents will damage the
mechanical parts and electrical circuits of the product
and directly affect its lifetime. Avoid cleaning the
exterior or interior of the product with a highly
volatile solvent, such as gasoline, paint thinner,
acetone, etc.
Keep the display cube away from flammable
and explosive materials
Product safety and personal safety cannot be ensured
in an environment with flammable and explosive
materials.
Keep the display cube away from equipment
with strong electromagnetic interference.
User Manual Visionpro
®
C Series Display Cube
- -
iv
Dangerous voltage inside.
May cause electric shock, burns, or death.
No user serviceable parts inside.
Only the dust screens and fuses are user serviceable. The
maintenance personnel must be properly trained;
otherwise, electric shock, UV radiation burns, contact
burns, serious injury, or irreparable damage to the
Visionpro® series display cube may be caused, and your
warranty will be invalidated.
Only the dust screens and fuses are user serviceable
The power must be disconnected before conducting such
operations. All the maintenance tasks must be carried out
by properly trained personnel.
The projection unit uses a professional-grade
ultra-bright LED light source. Do not replace the
LED with another LED light source, or the system
may be damaged.
Do not shut down the cooling fan of the Visionpro®
series display cube or block the surrounding air
circulation.
User Manual Visionpro
®
C Series Display Cube
- -
v
Dust in the air and hot air may cause the hardware of the
Visionpro® series display cube to short-circuit. Do not
operate the cube in a dusty or high-temperature
environment.
A10 cm clearance must be maintained at the top of
the vertical top layer of the Visionpro® series display
cube for the air circulation of the fan.
Some screens are sensitive, and fingerprints on the screen
will affect their optical performance. So the Visionpro®
series display cube must be protected against any
touching or scratching.
Disconnecting device of grid power
This equipment uses a coupler or power connector as the
disconnecting device. Make sure that the connector or
coupler is easily accessible so that you can disconnect the
grid power in an emergency.
User Manual Visionpro
®
C Series Display Cube
- -
vi
Content
1 DISPLAY CUBE OVERVIEW ................................................................................................................. 1
1.1 MAIN FEATURES ..................................................................................................................................... 3
1.2 APPEARANCE OF C SERIES DISPLAY CUBE ................................ ............................................................. 4
1.3 MAIN COMPONENTS OF C SERIES DISPLAY CUBE .................................................................................. 6
1.4 TECHNICAL SPECIFICATIONS OF C SERIES DISPLAY CUBE ..................................................................... 7
1.5 DIMENSIONS OF C SERIES DISPLAY CUBE .............................................................................................. 8
2 PROJECTOR OF C SERIES DISPLAY CUBE ................................................................................... 10
2.1 ENGINE OVERVIEW .............................................................................................................................. 10
2.2 INTERFACE BOX OVERVIEW ................................................................................................................. 12
2.2.1 Appearance of the Interface Box .................................................................................................. 12
2.2.2 Boards of VCL-3/VCL-3+ /VCL-3A Interface Box ..................................................................... 15
3NETWORK ENVIRONMENT FOR THE VIDEO WALL SYSTEM ................................................. 37
4 INSTALLATION OF C SERIES DISPLAY CUBE ............................................................................. 38
4.1 VTRON DLP
TM
DIGITAL VIDEO WALL SYSTEM ................................................................................. 38
4.2 SYSTEM CONFIGURATION ..................................................................................................................... 40
4.3 GROUNDING OF THE VIDEO WALL SYSTEM .......................................................................................... 41
5 SYSTEM ON/OFF ................................................................................................................................... 42
6 PRECAUTIONS ....................................................................................................................................... 43
7 DAILY MAINTENANCE ........................................................................................................................ 44
8 TROUBLE SHOOTING .......................................................................................................................... 45
9 CONTACT US .......................................................................................................................................... 46
User Manual Visionpro
®
C Series Display Cube
- -
1
1 Display Cube Overview
C series display cube, launched by VTRON, is coming to the rescue in a video-wallneeded age! Redundant solid-state LED light source of 1500 ANSI lumens, full-cycle
color & full- cycle brightness maintenance free as well as dual power module and other
cutting-edge technologies help C series display cube to build an excellent wall. It is not
the only but an ideal choice for all monitoring centers, command centers, and data
management centers.
Visionpro® C series display cube has the following standard models, and you can have
the product customized according to your actual needs.
XGA Display Cube
C-DX503
C-DX803
CF-DX675
C-DX507
C-DX603
C-DX505
C-DX805
C-DX607
CF-DX603
C-DX605
C-DX505D
C-DX677
C-DX673
CF-DX605
C-DX605D
C-DX807
CF-DX673
C-DX675
C-DX675D
SXGA+ Display Cube
C-SX503
CF-SX673
CF-SX605
C-SX505D
C-SX507
C-SX603
C-SX803
C-SX675
C-SX605D
C-SX607
CF-SX603
C-SX505
CF-SX675
C-SX675D
C-SX677
C-SX673
C-SX605
C-SX805
C-SX805D
C-SX807
1080P Display Cube
C-PH603
CF-PH703
C-PH705
C-PH605D
C-PH607
C-PH703
C-PH605
CF-PH705
C-PH705D
C-PH707
User Manual Visionpro
®
C Series Display Cube
- -
2
Note:
C indicates the display cube uses C-type frame with rear access;
CF indicates the display cube uses C-type frame with front access.
DX indicates the display cube is in XGA resolution;
SX indicates the display cube is in SXGA+ resolution;
PH indicates the display cube is in 1080P resolution.
The values of 50, 60, 67, 70, and 80 indicate the screen diagonal of the
display cube.
Value 3 indicates a 2nd generation LED light source is used;
Value 5 indicates a 3
rd
generation LED light source is used;
Value 7 indicates a 4th generation LED light source is used.
D indicates the display cube (3D display cube) supports 3D signal input
and display.
User Manual Visionpro
®
C Series Display Cube
- -
3
1.1 Main Features
Ultra-long Lifetime & Environmentally friendly
The change of light source is virtually unnecessary due to LED’s long life time.
It is environmentally friendly due to the absence of mercury, sodium, and other
harmful substance.
Full-cycle (Color & Brightness) Maintenance Free Technology
Intelligent system self-diagnosis function brings automatic & immediate service
recovery.
High-quality Image Display Technology
A LED light source of high ANSI lumens presents crisp, color-accurate, clear and
vivid images. The image shows high uniformity, giving you delightful visual
enjoyment.
Strong Signal Acquisition& Signal Processing Capacity
Signal acquisition (optional):
DVI, VGA, CVBS, YPbPr, HDMI, 3G-SDI, DP signal input etc. are supported.
Signal processing (optional):
The C series display cube has strong signal processing capacity with its
hot-swappable signal processing boards.
Multiple Intelligent Protection for System Safety
1＋1 redundant hot-swappable power supply, hot-swappable signal processing boards
and modular design provide and maintain a healthy environment for the system
running.
User Manual Visionpro
®
C Series Display Cube
- -
4
1.2 Appearance of C Series Display Cube
C Series Display Cube with Rear Access:
50〃, 60〃, 67〃, 70〃
80〃
User Manual Visionpro
®
C Series Display Cube
- -
5
C Series Display Cube with Front Access:
The overall view
The front view
The rear view
User Manual Visionpro
®
C Series Display Cube
- -
6
1.3 Main Components of C Series Display Cube
The Visionpro® C series display cube consists of the following parts. The relevant
functions are described in the following table.
Item
Function
Frame
A part of the structure for positioning and installing the
components of the integrated digital display cube.
Screen
Displays the image received from reflective mirror.
Reflective Mirror
1）Reflects the visual optical signal from the digital display
component to the screen;
2）Reduces the thickness of the integrated digital cube.
Projector
Engine
Converts the digital signal in TMDS format to an image signal to
produce image information
Interface Box
Converts computer signal into a digital signal in TMDS format
and inputs the signal to the projector. It also provides a control
port for receiving the control signal from the computer.
Power Module
It is embedded in the display cube frame and used to supply
power to the engine and interface box.
Six-axis Adjuster
The mechanical position adjustment part of the projector, which
is used to ensure the complete and correct output of the display
image to the screen.
User Manual Visionpro
®
C Series Display Cube
- -
7
1.4 Technical Specifications of C Series Display Cube
The following technical specifications are only for display cubes with standard
configuration. The detailed specifications may be different from the standard one due to
the different “optional components" you purchased.
Item
Standard Configuration
XGA Display Cube
SXGA+ Display Cube
1080P Display Cube
Display Technology
DLP technology
（0.7〞DMD,
14°LVDS）
DLP technology
（0.95〞DMD, 12°LVDS）
Resolution
1024×768
1400×1050
1920×1080
Light Source
Redundant LED
Gap(*)
C series display cube with rear access : 0.3-0.5 mm
1.0mm≤C series display cube with front access≤2.5mm
3D display cube< 0.3 mm
Control Mode
Network control (RJ45): 10M/100M self-adaptive Ethernet port ,
Wireless remote control(optional)
Power
Type
1+1 redundant hot-swappable power
Frequency
50/60Hz
Consumption
145W - 350W
Operating
Environment
Temperature
0-35℃ ( optimal temperature：23℃±5 ℃ )
Humidity
30-80% （no condensation）
Certification
CCC, CE, CB, ROHS
Note:
（*）The gap may differ according to screen type and operating environment (e.g., temperature,
humidity). To ensure precision, the operating temperature and humidity is recommended to
be within 24±2ºC and 50%~60% respectively.
User Manual Visionpro
®
C Series Display Cube
- -
8
1.5 Dimensions of C Series Display Cube
XGA&SXGA+ Display Cubes:
XGA&SXGA+ Display Cubes
Frame Type
C-type with Rear Access
C-type with Front Access
Screen Diagonal(inches)
50〞
60〞
67〞
80〞
60〞
67〞
Dimension(mm)
W
1000
1220
1370
1620
1220
1370
H1
750
915
1028
1215
915
1028
D
710
765
815
995
795
820
H2
995
1250
1388
1535
1250
1388
User Manual Visionpro
®
C Series Display Cube
- -
9
1080P Display Cube:
1080P Display Cube
Frame Type
C-type with Rear Access
C-type with Front Access
Screen Diagonal(inches)
60〞
70〞
70〞
Dimension(mm)
W
1330
1552
1552
H1
748
872
872
D
750
795
803
H2
988
1172
1172
Loading...