Instruction Manual
USB 2.0 Extender over Cat 5e UTP or better - Up to 50m
(Driver Free Version)
Model: NT50
Introduction
The NT50 enables users to extend beyond the standard 5m cable limit for USB peripheral
devices. NT50 is an ideal device for remotely accessing laser printers, scanners, web cameras,
external hard drives, CD/DVD burners, and flash drives. Additional applications include
security, industrial control, digital signage, scientific data acquisition and much more due to
the universal implementation of USB standards.
The NT50 is composed of two individual units: the PC Host (Local unit) and the Remote unit
(USB DEVICE). NT50 extends high-speed USB devices simply and reliably. The compact NT50
Extender install in minutes and fully support all USB versions (V1.1 and V2.0), at speed of up to
480mbps.
Product Contents
1 X NT50 USB HOST (Local unit)
1 X NT50 USB DEVICE (Remote unit)
1 X Power Adapter (5V, 1 A) for NT50 Remote unit
1 X Instruction manual
READ THESE NOTES BEFORE INSTALLING OR OPERATION
The NT50 is USB 2.0/1.1 compliant
The NT50 can extend USB a maximum of 50 meters.
Use only the AC adapter supplied with the NT50. Use of substitute adapter may
cause permanent damage to the system.
NT50 supports all major operating systems - Windows, Mac OS and Linux. No
software drivers are required.
Use a Cat 5e or better cable, which is not longer than 50 meters.
System Requirements
USB enabled computer system with available USB port
Available AC power outlet
Qualied Network cable.
Loading...