VTIN TECHNOLOGY PC260A User Manual

Page 1
2.4G Laser Presenter
With 2.4G red light laser presenter, focus your audiences on the most important points with the bright red laser pointer. Everything you need to control your slideshow is in the palm of your hand. Move around the room and engage your audience with reliable wireless range of up to 20 meters. Plug-and-play design, just plug the USB receiver into computer's USB port and you're ready to start the show. So easy to operate.
Features:
2. Up to 20 meters wireless range
3. One-touch slideshow controls
4. Plug-and-play
5. High compatibility
6. Stylish appearance
7. Compact and portable
FCC ID:2AIL4-PC260A
Page 2
Pairing:
Power on the device, blue LED will flash fast. Plug the USB adapter into computer and wait about 3 seconds. LED stopped flashing, means pairing succeed.
Button Functions:
1. Power: Power on/off the device
2. Screen: Press SCREEN button once to enter/exit full screen Long press SCREEN button to enter/exit blank screen(Only available in full screen mode)
3. Page up: Press once to go to previous page
4. TAB: Press once - Tab function
Press twice - Enter function Long press - TAB+ALT function
5. Page down: Press once to go to next page
6. Laser switch: press once to turn on/off laser point
7. Vol+: Press once - Volume up
Long press - Previous song
8. Mute: Press once - Mute
Long press - Pause/Play
9. Vol-: Press once - Volume down
Long press - Next song
Specifications:
Transmitter Technology: 2.4GHz Radio Frequency Control distance: ≤20m Laser distance: ≤200m Laser module: Class 3R Output power: 3.3mW Laser wavelength: 650nm Battery: AAA*1 / Li-on battery(optional) Working Voltage: 3.3V Size: 140*18*19mm Weight: 22g(AAA version)/28g(Rechargeable version) Supported OS: Windows, Android, Mac OS, Linux
Safety Warning:
1. Be warned that laser point should never under any circumstances be
directed into people and animal's eyes.
2. This product is not a toy and should not to be used by anyone under 18.
3. It is illegal to direct the laser point at any flying objects, moving vehicles
and any public or private structures.
4. The laser point can be dangerous if not used properly.
Page 3
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions (1)this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Loading...