VTech Telecommunications 80 9148 00 User Manual

Abridged user’s manual

CS6758-3/CS6759

DECT 6.0 Cordless telephone

Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news.

Compatible with

Hearing Aid T-Coil

TIA-1083

Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license.

The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR® label indicating it meets the latest energy efficiency guidelines.

Introduction

To protect our environment and conserve natural resources, this Abridged user’s manual provides you with the basic installation and use instructions. A limited set of features are described in abbreviated form.

Please refer to the online Complete user’s manual for a full set of installation and operation instructions at www.vtechphones.com.

Before using this VTech product, please read Important safety instructions on page 5 of this user’s manual.

Parts checklist

Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.

Battery compartment cover

(1 for CS6759) (3 for CS6758-3)

Telephone base power adapter

Abridged

user’s manual

Battery

(1 for CS6759) (3 for CS6758-3)

Telephone line cord

Quick sta rt guide

Handset

(1 for CS6759) (3 for CS6758-3)

Handset charger and charger adapter

(2 for CS6758-3)

Telephone base

Quick start guideAbridged user’s manual

Telephone base and handset charger installation

A DSL filter (not included) is required if you have DSL high-speed Internet service.

The DSL filter must be plugged into the telephone wall jack.

Telephone line cord

Tel ep hone wall jack

Electrical outlet not controlled by a wall switch

Telephone base power adapter

Charger adapter

TEL. LINE

DC 6V

Use Only

Supplied Adapter

Telephone base

Use only the power adapter and battery supplied with this product. To order a

•

Handset charger

replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

CAUTION: If you subscribe to telephone service from a cable company or a VoIP service

provider, contact your cable/VoIP service provider for more information.

Handset battery installation

Install the battery as shown below.

Plug the battery connector

1. Place the battery with the label securely into the socket.

Slide the battery compartment cover

3. Place the handset in the telephone towards the center of the handset until it clicks into place.

IMPORTANT: Check for a dial tone by pressing

successful. If you do not hear a dial tone:

Make sure the installation procedures described above are properly done.

• It may be a wiring problem. If you have changed your telephone service to digital service from a

• cable company or a VoIP service provider, the telephone line may need to be rewired to allow all existing telephone jacks to work. Contact your cable/VolP service provider for more information.

THIS SIDE UP facing up and the wires inside the battery compartment.

4. base or charger to charge.

CHARGE light remains on when charging.

. If you hear a dial tone, the installation is

Handset battery charging

Once you have installed the battery, the screen indicates the battery status. For best performance, keep the handset in the handset charger when not in use. The battery is fully charged after 11 hours of continuous charging.

Battery indicators Battery status Action

The screen is blank, or shows Put in charger and

ﬂashes.

The screen shows

Low battery and

ﬂashes.

The screen shows HANDSET X.

The battery has no charge or very little charge. The handset cannot be used.

The battery has enough charge to be used for a short time.

The battery is charged. To keep the battery charged,

Charge without interruption (at least 30 minutes).

place it in the handset charger when not in use.

Tabletop to wall mount installation

The telephone comes ready for tabletop use. Follow the steps below to mount your telephone on a wall.

Push to open the wall mount bracket

Unplug the power adapter and

1. telephone line from the wall outlets. and the telephone base.

TEL. LINE

DC 6V

Use Only

Supplied Adapter

Swivel the wall mount bracket down.3.

2. as the arrows indicated below.

Plug the power adapter and the

4. telephone line cord to the base through the space between the wall mount bracket and the base.

Press the wall mount bracket onto the telephone base until it clicks into place.

5. Plug the power adapter and telephone line into the wall outlets. Align the holes on the wall mount bracket with the standard wall mounting plate and slide the telephone down until it locks securely. Bundle the telephone line cord and power adapter cord neatly with twist ties.

Using the menu

Press MENU when the telephone base/handset is not in use.

Press

Press SELECT to enter that menu.

• To return to the previous menu, press CANCEL.

•

To return to idle mode, press and hold CANCEL.

or until the screen displays the desired feature menu.

Important safety instructions

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of ﬁre, electric shock and injury, including the following:

Read and understand all instructions.

Follow all warnings and instructions marked on the product.

Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower.

Do not place this product on an unstable table, shelf, stand or other unstable surfaces. Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation.

6. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where proper ventilation is not provided.

This product should be operated only from the type of power source indicated on the marking label. If you

7. are not sure of the type of power supply in your home or ofﬁce, consult your dealer or local power company.

Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on.

Never push objects of any kind into this product through the slots in the telephone base or handset because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product.

10.

To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other than speciﬁed access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.

Do not overload wall outlets and extension cords.

11. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the

12. following conditions:

When the power supply cord or plug is damaged or frayed.

•

If liquid has been spilled onto the product.

•

If the product has been exposed to rain or water.

•

If the product does not operate normally by following the operating instructions. Adjust only those

•

controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation. If the product has been dropped and the telephone base and/or handset has been damaged.

•

If the product exhibits a distinct change in performance.

• Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric

13. shock from lightning.

Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain circumstances, a

14. spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet, and should not put a charged handset into the cradle, if the phone is located in an environment containing concentrations of ﬂammable or ﬂame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a ﬁre or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc.

Only put the handset of your telephone next to your ear when it is in normal talk mode.

15. The power adapters are intended to be correctly oriented in a vertical or ﬂoor mount position. The prongs

16. are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

SAVE THESE INSTRUCTIONS

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless telephones): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation

of the interference between portable wireless telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients

Should keep wireless telephones at least six inches from the pacemaker.

•

Should NOT place wireless telephones directly over the pacemaker, such as in a breast pocket, when it is

•

turned ON. Should use the wireless telephone at the ear opposite the pacemaker. WTR’s evaluation did not identify

•

any risk to bystanders with pacemakers from other persons using wireless telephones.

Operating range

This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance

- which can vary with the locations of the telephone base and handset, the weather, and the layout of your

home or ofﬁce. When the handset is out of range, the handset displays Out of range or no pwr at base. If there is a call while the handset is out of range, it may not ring, or if it does ring, the call may not connect

well when you press

If the handset moves out of range during a telephone conversation, there may be interference. To improve reception, move closer to the telephone base.

. Move closer to the telephone base, then press to answer the call.

ECO mode

This power conserving technology reduces power consumption for optimal battery performance. The ECO mode activates automatically whenever the handset is synchronized with the telephone base.

Maintenance

Taking care of your telephone

Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.

Avoid rough treatment

Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.

Avoid water

Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.

Electrical storms

Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electrical appliances during storms.

Cleaning your telephone

Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or mild soap. Do not use excess water or cleaning solvents of any kind.

Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORD FROM THE WALL. Then remove the telephone by the unplugged cords.

About cordless telephones

•

Privacy: The same features that make a cordless telephone convenient create some

limitations. Telephone calls are transmitted between the telephone base and the handset by radio waves, so there is a possibility that the cordless telephone conversations could be intercepted by radio receiving equipment within range of the handset. For this reason, you should not think of cordless telephone conversations as being as private as those on corded telephones.

Electrical power: The telephone base of this cordless telephone must be connected to a working

•

electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made from the handset if the telephone base is unplugged, switched off or if the electrical power is interrupted.

Potential TV interference: Some cordless telephones operate at frequencies that may cause interference

•

to televisions and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR often reduces or eliminates the interference.

Rechargeable batteries: Exercise care in handling batteries in order not to create a short circuit with

•

conducting material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger.

Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn

•

or puncture the battery. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.

The RBRC® seal

The RBRC® seal on the nickel-metal hydride battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada.

The RBRC hydride batteries into the trash or municipal waste, which may be illegal in your area.

VTech’s participation in RBRC battery at local retailers participating in the RBRC VTech product

on Ni-MH battery recycling and disposal bans/restrictions in your area. VTech’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources.

RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation.

program provides a convenient alternative to placing used nickel-metal

makes it easy for you to drop off the spent

service centers. Please call 1 (800) 8 BATTERY

program or at authorized

for information

Limited warranty

What does this limited warranty cover?

The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada.

What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (“Materially Defective Product”)?

During the limited warranty period, VTech’s authorized service representative will repair or replace at VTech’s option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper

installation, abnormal operation or handling, neglect, inundation, ﬁre, water or other liquid intrusion; or

2. Product that has been damaged due to repair, alteration or modiﬁcation by anyone other than an

authorized service representative of VTech; or

3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or

cable or antenna systems; or

4. Product to the extent that the problem is caused by use with non-VTech accessories; or

5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have

been removed, altered or rendered illegible; or

6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or

Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or

7. Product returned without a valid proof of purchase (see item 2 below); or

8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems

outside the unit.

How do you get warranty service?

To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. NOTE: Before calling for service, please review the user’s manual - a check of the Product’s controls and

features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation

and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty.

What must you return with the Product to get warranty service?

Return the entire original package and contents including the Product to the VTech service location along

1. with a description of the malfunction or difﬁculty; and

Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and

2. the date of purchase or receipt; and

Provide your name, complete and correct mailing address, and telephone number.

Other limitations

This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTech’s responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modiﬁcations to this limited warranty and you should not rely on any such modiﬁcation.

State/Provincial Law Rights: This warranty gives you speciﬁc legal rights, and you may also have other rights, which vary from state to state or province to province.

Limitations: Implied warranties, including those of ﬁtness for a particular purpose and merchantability (an unwritten warranty that the Product is ﬁt for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost proﬁts or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Please retain your original sales receipt as proof of purchase.

FCC, ACTA and IC regulations

FCC Part 15

This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

•

Changes or modiﬁcations to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone.

To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more.

This Class B digital apparatus complies with Canadian ICES-003.

FCC Part 68 and ACTA

This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identiﬁer in the format US:AAAEQ##TXXXX. This identiﬁer must be provided to your telephone service provider upon request.

The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See the installation instructions in the user’s manual.

The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identiﬁer (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be ﬁve (5.0) or less. For more information, please contact your telephone service provider.

This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone service provider or a qualiﬁed installer.

If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited warranty.

If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to notify you before interrupting service. If advance notice is not practical, you will be notiﬁed as soon as possible. You will be given the opportunity to correct the problem and the telephone service provider is required to inform you of your right to ﬁle a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone service provider is required to notify you if such changes are planned.

If this product is equipped with a corded or handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g.,

police, ﬁre, medical) in these locations. If you do store or test emergency numbers, please: Remain on the line and brieﬂy explain the reason for the call before hanging up. Perform such activities in off-peak hours, such as early morning or late evening.

Industry Canada

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

The term ‘’IC:‘’ before the certiﬁcation/registration number only signiﬁes that the Industry Canada technical speciﬁcations were met.

The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed ﬁve.

This product meets the applicable Industry Canada technical speciﬁcations.

Technical speciﬁcations

Frequency control Crystal controlled PLL synthesizer

Transmit frequency Handset: 1921.536-1928.448 MHz

Channels 5

Nominal effective range

Power requirements Handset: 2.4V Ni-MH battery

Memory Directory: 50 memory locations; up to 30 digits and 15 characters

Telephone base: 1921.536-1928.448 MHz

Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use.

Telephone base: 6V DC @ 400mA Charger: 6V AC @ 300mA

Caller ID log: 50 memory locations; up to 24 digits and 15 characters

VTECH TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications, Inc., Beaverton, Oregon 97008. Distributed in Canada by VTech Technologies Canada Ltd., Richmond, B.C. V6W 1L5. VTech is the registered trademark of VTech Holdings Limited. Copyright © 2012 for VTECH TELECOMMUNICATIONS LTD. All rights reserved. Printed in China.

Abridged user’s manual

CS6858-3/CS6859/CS6859-2/ CS6859-3/CS6859-4

DECT 6.0 Cordless telephone

Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news.

Compatible with

Hearing Aid T-Coil

TIA-1083

Introduction

Please refer to the online Complete user’s manual for a full set of installation and operation instructions at www.vtechphones.com.

Before using this VTech product, please read Important safety instructions on page 6 of this user’s manual.

Parts checklist

Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.

Battery compartment cover

(1 for CS6859) (2 for CS6859-2)

(3 for CS6858-3/CS6859-3) (4 for CS6859-4)

Battery

(1 for CS6859) (2 for CS6859-2)

(3 for CS6858-3/CS6859-3) (4 for CS6859-4)

(1 for CS6859) (2 for CS6859-2)

(3 for CS6858-3/CS6859-3) (4 for CS6859-4)

Telephone baseHandset

Telephone base power adapter

Abridged user’s manual Quick star t guide

Telephone line cord

Quick start guideAbridged user’s manual

Handset charger and charger adapter

(1 for CS6859-2) (2 for CS6858-3CS6859-3)

(3 for CS6859-4)

Telephone base and handset charger installation

A DSL filter (not included) is required if you have DSL high-speed Internet service.

The DSL filter must be plugged into the telephone wall jack.

Telephone line cord

Tel ep hone wall jack

Supplied Adapter

TEL. LINE

DC 6V

Use Only

Electrical outlet not controlled by a wall switch

Telephone base power adapter

Charger adapter

Telephone base

Use only the power adapter and battery supplied with this product. To order a

• replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

Handset charger

CAUTION: If you subscribe to telephone service from a cable company or a VoIP service

provider, contact your cable/VoIP service provider for more information.

Handset battery installation

Install the battery as shown below.

Plug the battery connector

1. Place the battery with the label securely into the socket.

Slide the battery compartment cover

3. Place the handset in the telephone towards the center of the handset until it clicks into place.

THIS SIDE UP facing up and the wires inside the battery compartment.

4. base or charger to charge.

CHARGE light remains on when charging.

IMPORTANT: Check for a dial tone by pressing

. If you hear a dial tone, the installation is

successful. If you do not hear a dial tone:

Make sure the installation procedures described above are properly done.

• It may be a wiring problem. If you have changed your telephone service to digital service from a

• cable company or a VoIP service provider, the telephone line may need to be rewired to allow all existing telephone jacks to work. Contact your cable/VolP service provider for more information.

Handset battery charging

Battery indicators Battery status Action

The screen is blank, or shows Put in charger and

ﬂashes.

The screen shows

Low battery and

ﬂashes.

The screen shows HANDSET X.

The battery has no charge or very little charge. The handset cannot be used.

The battery has enough charge to be used for a short time.

The battery is charged. To keep the battery charged,

Charge without interruption (at least 30 minutes).

place it in the handset charger when not in use.

Tabletop to wall mount installation

The telephone comes ready for tabletop use. Follow the steps below to mount your telephone on a wall.

Push to open the wall mount bracket

Unplug the power adapter and telephone line from the wall outlets. and the telephone base.

2. as the arrows indicated below.

TEL. LINE

DC 6V

Use Only

Supplied Adapter

Plug the power adapter and the

Swivel the wall mount bracket down.3.

4. telephone line cord to the base through the space between the wall mount bracket and the base.

Press the wall mount bracket onto the telephone base until it clicks into place.

+ 24 hidden pages

VTech Telecommunications 80 9148 00 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual