VTech Telecommunications 80 6470 02 Users manual

User’s manual

TL7601
DECT 6.0 remote dial pad
for use with AT&T models
TL7610/TL7611/
TL7650/TL7651

Congratulations

on your purchase

of this AT&T product.

Before using this AT&T product, please read the

Important safety information

on pages 24-27 of this manual. Please thoroughly

read the user’s manual for all the feature operations

and troubleshooting information necessary to install

and operate your new AT&T product. You can also

visit our website at www.telephones.att.com

or call 1 [phone].

In Canada, dial 1 [phone].

Model #: TL7601
Type: Remote dial pad

Serial #:

(found in the battery compartment)

Purchase date:
Place of purchase:

Save your sales receipt and original packaging in case it is necessary
to return your remote dial pad for warranty service.

The ENERGY STARR program (www.energystar.gov) recognizes
and encourages the use of products that save energy and
help protect our environment. We are proud to mark this
product with the ENERGY STARR label indicating it meets the
latest energy efficiency guidelines.

© 2008 Advanced American Telephones. All rights reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property II, L.P. d/b/a
AT&T Intellectual Property licensed to Advanced American Telephones.
Printed in China.

Parts checklist

B
a
tte
ry
P
a
c
k

B
T
1
9
0
5
4
5

3
.7
V
1
7
0
m
A
h
L
i­io
n
P
o
ly
m
e
r

WA

R
N
IN
G
:
D
O
N
O
T
B
U
R
N

O
R
D
IS
A
S
S
E
M
B
L
E
O
R

P
U
N
C
T
U
R
E
BA

T
T
E
R
I

E
S

M
A
D
E
I

N
C
H
I

N
A

Check to make sure the remote dial pad package includes the
following items:

User's manual

Battery for dial pad

Dial pad

Battery compartment cover

Charger for dial pad with
power adapter installed

Belt clip for dial pad

User’s manual

TL7601
DECT 6.0 remote dial pad
for use with AT&T models
TL7610/TL7611/
TL7650/TL7651

Table of contents

Getting started

Quick reference guide .................................................................................1

Installation preparation ..............................................................................2

Charger installation ...................................................................................... 3

Battery installation & charging ...............................................................4

Registration and de-registration ..............................................................................6

To register with single headset ........................................................ 6

To register with two headsets...........................................................7

To de-register ............................................................................................8

Belt clip.........................................................................................................................9

Remote dial pad operation

Remote dial pad settings ........................................................................10

Language .................................................................................................. 10

Basic operation ...........................................................................................................11

Making a call ..........................................................................................................11

On-hook dialing (predialing) ........................................................................11

Answer a call .......................................................................................... 12

Using the remote dial pad .........................................................12

Using the headset .......................................................................... 12

Last number redial ............................................................................... 12

Options while on calls ....................................................................... 14

Call waiting........................................................................................ 14

Last number redial ......................................................................... 14

Screen icons & display screen messages ................................. 15

Troubleshooting

Troubleshooting ........................................................................................ 17

Maintenance and safety

Maintenance ............................................................................................... 23

Important safety information ............................................................. 24

Appendix

FCC Part 68 and ACTA .......................................................................... 28

FCC Part 15 ................................................................................................ 31

Limited warranty ...................................................................................... 33

Technical specifications ........................................................................ 37

Index

Index ............................................................................................................... 38

Getting started

Quick reference guide

Loop

You can string a neck or
wrist cord (not provided)
through this loop.

LANG/SEL

Press to review and change
language options (page 10).
Press again to save the
setting.

While reviewing redial
memory, press to select a
phone number (page 12).

CHARGE light

On when the remote dial
pad is charging (page 5).

CALL/FLASH

Press to make or answer a
call. During a call, press to
receive call waiting
(page 14).

DELETE

While reviewing the redial
memory, press to delete
an individual entry, or
press and hold to clear the
redial history (page 13).

While predialing, press to
delete digits (page 11).

or

LANG

PAUSE

DOWN

to view

UP

DOWN

feature,

to insert

UP /

When you are not using the
dial pad, press
the redial memory. Then

UP

press
to scroll through the redial
memory (page 12).

While in the
press to display the
language options.
While entering digits, press
and hold
a dialing pause (page 13).

OFF/CLEAR

During a call, press to hang
up.
While using menus, press

to cancel an operation,
return to the previous
menu, or exit the menu
display.
While predialing, press to
delete digits.

For complete instructions on using the headset, please refer to
the manual provided with your TL7610/TL7611/TL7650/TL7651
product. If you are unable to find your manual, visit

www.telephones.att.com to view and download the manual.

1

Getting started

Installation preparation

You must install and
charge the battery before
using the remote dial pad.

Your product may be shipped with a protective sticker covering the
remote dial pad display - remove it before use.

For customer service or product information, visit our website at

STOP!

See pages 4-5
for easy instructions.

www.telephones.att.com or call 1 [phone].

In Canada, dial 1 [phone].

Avoid placing the remote dial pad too close to:

• Communication devices such as: television sets, VCRs, or other
cordless telephones.

• Excessive heat sources.

• Noise sources such as a window with traffic outside, motors,
microwave ovens, refrigerators, or fluorescent lighting.

• Excessive dust sources such as a workshop or garage.

• Excessive moisture.

• Extremely low temperature.

• Mechanical vibration or shock such as on top of the washing
machine or work bench.

2

Getting started

Charger installation

1. Make sure the small

end of the power
adapter is plugged into
the jack on the back of
the charger, and then
make sure that the
cord is routed behind
the tab as shown.

2. Plug the power

adapter into a power
outlet not controlled
by a wall switch.

IMPORTANT INFORMATION

Use only the power adapter supplied with this product. To order a

1.

replacement power adapter, visit our website at

www.telephones.att.com, or call 1 [phone].

In Canada dial 1 [phone].

The power adapter is intended to be correctly oriented in a vertical

2.

or floor mount position. The prongs are not designed to hold the
plug in place if it is plugged into a ceiling, under-the-table or
cabinet outlet.

3

Getting started

Battery Pack
BT190545

3.7V 170mAh Li-ion Polymer
WARNING: DO NOT BURN
OR DISASSEMBLE OR
PUNCTURE BATTERIES
MADE IN CHINA

Battery Pack
BT190545

3.7V 170mAh Li-ion Polymer
WARNING: DO NOT BURN
OR DISASSEMBLE OR
PUNCTURE BATTERIES
MADE IN CHINA

Battery Pack
BT191545

3.7V 260mAh Li-ion Polymer
WARNING: DO NOT BURN
OR DISASSEMBLE OR
PUNCTURE BATTERIES
MADE IN CHINA

Battery installation & charging

Install the battery as shown below. After installing the battery,
place the remote dial pad in the charger. For optimal performance,
charge the remote dial pad battery for at least six hours before
use.

Step 1

Insert the battery
plug securely into
the jack located
inside the remote
dial pad battery
compartment,
matching the
color-coded label.

Step 2

Place the
battery in the
compartment with
the label THIS
SIDE UP facing up
as indicated.

4

Step 3

Align the cover
flat against
the battery
compartment,
then slide it
upwards until it
clicks into place.

Getting started

Battery installation & charging

CHARGE light

Step 4

Charge the remote dial pad
by placing it face up in the
charger. The CHARGE light
will be on when the dial pad
battery is charging.

NOTE:

1. W

hen the battery is charging, you will see alternating. When the battery is

fully charged, you will see .

2.

If the display on the remote dial pad is blank, try unplugging the power adapter,
and firmly plugging it in again.

IMPORTANT INFORMATION

Use only the supplied rechargeable battery or replacement battery
(AT&T model BT190545). To obtain your free replacement battery, call

1 [phone]. In Canada, dial 1 [phone].

5

Getting started

Remote dial pad registration and de-registration

The TL7601 remote dial pad allows you to place phone calls
with the AT&T cordless headset system. The remote dial pad can
be registered only to the DECT headset base. You must register
it to the TL7610/TL7611/TL7650/TL7651 headset base before
use. The remote dial pad should be charged for a minimum of
five minutes before attempting registration to the headset base.
You cannot register the dial pad to the headset base until after a
headset is registered to the headset base.

To register the remote dial pad to the
headset base (with single headset)

NOT REGISTERED

1. The new remote dial pad should be
charged for at least five minutes
before registering to the headset base.
When the remote dial pad is removed
from the charger, it will show NOT
REGISTERED on the screen.

PRESS PAIR

4 SEC ON BASE

PLEASE WAIT...

On

2. Place the unregistered remote dial
pad into the charger. If PRESS PAIR

4SEC ON BASE does not appear on

the remote dial pad screen after a few
seconds, remove the remote dial pad
and place it in the charger again.

3. On the headset base, press and
hold the PAIR button for about four
seconds (until the red MUTE light on
the headset base turns on) and then
release the button. The remote dial pad
will show PLEASE WAIT... and it will

6

1

2

1

Getting started

Remote dial pad registration and de-registration

take about 10 seconds to complete the
registration.

DIAL PAD

4. The MUTE light will turn off and you will
see the DIAL PAD screen, (shown to the
left,) indicating successful registration.

To register the remote dial pad to the
headset base (with two headsets)

DIAL PAD

• The dial pad can only be paired with one
headset, even if there are two headsets
in your system. Whichever headset was
registered most recently before the dial

DIAL PAD

pad is registered will pair with the dial
pad. The display indicates the paired dial
pad by showing either 1or 2.

NOTE:

1. You cannot register a remote dial pad if a system headset is in use.

2. If the registration is not successful, the display will show
the remote dial pad by lifting it out of the charger and then place it back in the
charger. Now try the registration process again.

3.

If you have one registered headset, the remote dial pad will automatically connect to
the headset after registering on the headset base.

4. If you want the other headset to work with the remote dial pad, you have to de­register all the headsets and the remote dial pad first. Refer to the de-registration
information on page 8.

5.

Registration time is dependent on environmental conditions and will vary.

NOT REGISTERED. Reset

7

Getting started

Remote dial pad registration and de-registration

To de-register the remote dial pad

Please read carefully through all the
instructions on this page before beginning
the de-registration process.

This de-registration will de-register all the
items registered to the headset base, including
all headsets and the remote dial pad.

Press and hold the PAIR button on the

1.

headset base until the MUTE light starts to
flash then release the PAIR button.

Flashes

Immediately press and release the PAIR

2.

button again. You must press the PAIR
button while the MUTE light is still flashing.
(If the light stops flashing before the dial
pad is registered, pick up the remote dial
pad and place it back into the charger, then
start again with step one above.)

CONNECTING...

The remote dial pad will show CONNECTING...

3.

then NOT REGISTERED if de-registration was

NOT REGISTERED

NOTE: De-registering the remote dial pad from the headset base will also de-
register all the headsets. To use the remote dial pad or the headset again,
refer to the registration information on pages 6-7.

successful.

8

Getting started

Belt clip

To attach the
belt clip:

Snap the belt clip
into the retaining
tabs on both sides
of the dial pad as
shown in the figure.

To remove the
belt clip:

Gently lift either of
the belt clip retaining
tabs, shown in the
figure, to remove the
belt clip from the dial
pad.

9