VTech Telecommunications 80-1491-01 User Manual

1

2

Go to www.vtechphones.com

63

to register your product for enhanced warranty support
and latest VTech product news.

RM5752

RM5752-2

Set up Wi-Fi connection

Wi-Fi Full HD Video Monitor

VTech Wi-Fi HD Video Monitor allows you to stay
close to your baby when you are on the move or
away.
This monitor is Wi-Fi enabled, which uses your home
wireless network to stream live video and audio
through the HD camera unit and 5-inch touch screen
parent unit. It allows you to maintain a constant
connection to your baby.

You can also monitor from your smartphone and
mobile tablet.
VTech Wi-Fi HD Video Monitor uses MyVTech
Baby app to let you instantly see and hear what’s
happening with your baby from anywhere in the
world. The app can be downloaded from the App
Store or the Google PlayTM Store, directly from your
smartphone or mobile tablet.

Add camera

After connecting the parent unit to your Wi-Fi network, press

1

or to choose the RM5752 camera, then press SELECT.

Quick start guide

Follow the instructions shown on screen, then press or to choose

2

Next, then press SELECT.

After the parent unit is fully charged,

1

power on the parent unit.

2s

Press or to choose your preferred and secured

2

2.4GHz Wi-Fi network with good signal strength, then
press SELECT.

- You must select a password-protected network.

Create a security key for the camera. The security key must contain 8

3

to 20 alphanumeric characters with at least one uppercase character
and one number. Press to or to choose Next , then press SELECT
to continue.

Enter the password of the Wi-Fi network. Press , , or

3

to highlight the character, then press SELECT. When done,

press , , or to choose Next, then press SELECT.

After the camera unit is successfully added to your parent unit, the

4

parent unit displays the camera image in Single View.

Basic operation

Use the menu

Press MENU/SELECT to enter the menu, choose a menu item, or save a setting. You
can use the parent unit menu for advanced setting or operations, such as to play or
stop the camera unit lullaby, or adjust the camera unit sound sensitivity.

While in the menu:

• Press , , or to scroll among the menu options.

• Press MENU/SELECT to select an item.

• Press to return to the main menu or idle screen.

Adjust speaker volume

Press -VOL / VOL+ to adjust your parent unit
speaker volume. It determines the volume of
sound transmitted from your camera unit.

63ē

• Write down or remember the security key. You will need to provide the same
security key if you want to access your camera remotely.

Zoom

Press to zoom in or out.

63ē

Talk to your baby unit

Press and hold TALK in Single CAM mode and speak to your
parent unit. Your voice is transmitted to the baby unit.

• You can pair up to 4 camera units to your parent unit.

• The camera preview will be refreshed every second.

63ē

Press and hold

1

Basic operation

2

Auto-prompt for software and firmware updates

Turn off the screen

Press LCD ON/OFF to switch off the screen. You can still
hear sound from the camera unit.

LED is turnung off...

Parent unit settings

1. Press MENU when the parent unit is idle.

2. Press , , or to choose General Setting, then

press SELECT.

Read the online app manual for complete operation instructions

Driven by system updates, the software, app manual, and

1

online FAQs will be updated periodically.

For latest information and supports, go and check the app
manual and online FAQs.

1. Press MENU when the parent unit is idle.

2. Press or to choose General Setting, then press

SELECT.

2

Monitoring mode

If you have two or more camera units, you can choose the desired monitoring
mode.

1. Press MENU when the parent unit is idle.

2. Press or to choose Monitoring Mode, then press SELECT.

3. Press or to choose Single CAM, Patrol or Split, then press SELECT.

1. Press or to choose User's manual, then press SELECT.Press or to choose Help, then press SELECT..

3

To ensure that your HD video monitor is always at its best performance, the parent
unit will prompt you to update its software and the camera unit's firmware when
there are new versions available.

• Press or to choose UPDATE NOW, then press SELECT. The new software will

then be installed automatically. When the software update is complete, the parent
unit will restart.

• Make sure your parent unit battery level is more than 50% before you begin the update.

Press or to choose RM5752, then press SELECT. Use your

4

smartphone or mobile device to read the online parent unit app
manual on our product support web page.

• To read the online manuals, go to

help.vtechphones.com/RM5752 or scan the QR code.

Remote monitoring

Download the free MyVTech Baby mobile app from the App Store or

1

Google Play store and install it to a mobile device, then you can use your
mobile device and the mobile app to monitor your areas remotely.

• Make sure your mobile device meets the
minimum requirement for the mobile
app.

Minimum requirement

The mobile app is compatible with:

• AndroidTM 4.4 or later; and

• iOS 8.0 or later.

Install MyVTech Baby mobile app

1. Browse the App Store or the Google Play store .

2. Search for the mobile app with the keyword “myvtech baby“.

3. Download and install the MyVTech Baby mobile app to your mobile
device.

Driven by Android and iOS updates, MyVTech Baby mobile app, app
manual, and online FAQs will be updated periodically.

Download and install the latest mobile app. For latest information and
supports, go and check the app manual and online FAQs.

Specifications are subject to change without notice.
© 2018 VTech Communications, Inc.
All right s reser ved. 12/18. RM5752_QSG_V1.0
Document order number: 96-012191-010-100

Tap to run the mobile app on your mobile

2

device, and then create a camera account.

• We recommend that you use common webmail
services, such as Google Gmail for registration
of your camera account.

Check your email (and Spam

3

folder), and activate your
new camera account via the
email link, then sign in to
your account.

Follow the instructions on the

4

screen to add the camera to your
camera account.

• Make sure your mobile device
is connected to the 2.4GHz Wi­Fi network that your parent unit
has connected to when adding
the camera.

Type in the security key you

5

have set for the camera with
your parent unit. See Step 3 in

Add camera section.

Android TM and Google Play TM are trademarks of Google Inc.

App Store is a trademark of Apple Inc ., registered in the U.S. and other countries.

IOS is a tradem ark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Start using your monitoring system remotely.

6

• You must complete the camera setup in the above

Set up Wi-Fi network and 2 Add camera

sections before you can access your camera
remotely.

• Your parent unit can pair and access a maximum of 4 camera units. You
can add more camera units to your HD video monitor system using the
MyVTech Baby mobile app. Download the mobile app and create a camera
account. Then, you can use the mobile app to pair your existing camera units
in your parent unit to your camera account, and also pair additional camera
units to your account. The mobile app can pair and access up to 10 camera
units. The additional camera units can only be paired and accessed via the
mobile app.

• Tap on the camera list to display the side menu,
and then tap Help to refer to the online mobile app
manual for the complete operation instructions. You
can also scan the QR code on the right, or go to

www.vtechphones.com/manual/RM5752/mobile, to

open the manual in a web browser.