VTech Telecommunications 80-1384-01 User Manual

Go to www.vtechphones.com

1

NOTESNOTE

3

> 3ft (1m)

NOTESNOTE

6U]KXOTMUT

3OYKKTLUTIZOUT

6U]KXOTMULL

3OYKKTLUTIZOUT

NOTESNOTE

﹏﹏﹏
﹏﹏﹏
﹏﹏﹏﹏

﹏﹏﹏﹏

﹏﹏﹏﹏

﹏﹏﹏﹏﹏

﹏﹏﹏﹏﹏

﹏﹏﹏
﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏

﹏﹏﹏﹏﹏

﹏﹏﹏﹏﹏

to register your product for
enhanced warranty support and
the latest VTech product news.

VM320

VM320-2

Video Monitor

Quick start guide

Document order number:
All rights reserved. 03/19. VM320-2_QSG_V1.
© 2018 VTech Communications, Inc.
Specifications are subject to change without notice.

What’s in the box

VM320 VM320-2

Connect the baby monitor

Power on or off the baby monitor

2

Slide the ON/OFF switch to
power on or off your baby unit.

Slide the ON/OFF switch to power
on or off your parent unit.

6U]KXOTMUT

TLUTIZOUT
K

OYK

3

Positioning the baby monitor

3ft (1m)

>

3ft (1m)

<

Status check

4

Once you power on both your baby unit and parent unit, your parent unit displays image
from the baby unit, and the connection status displays on the LCD screen.

The POWER LED light of baby unit turns on.

Basic operation - Parent unit

Zoom

Press to zoom in or out.

Talk to your baby unit

Press and hold TALK and speak to your
parent unit. Your voice is transmitted to
the baby unit.

Press and hold

• The rechargeable battery is pre-installed in your parent unit.

• Use only the power adapters supplied with this product.

• Make sure the baby monitor is not connected to an electric outlet that is controlled by a switch.

• Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are
not designed to hold the weight of baby monitor, so do not connect them to any ceiling, under­the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.

• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.

Caution

• The default volume of your parent unit is level

3, and the maximum volume is level 5. If you
experience high-pitched screeching noise from
your baby monitor while positioning:

- Make sure your baby unit and parent unit are more
than 1 meter (3 feet) apart, OR

- Turn down the volume of your parent unit.

3ft (1m)

≥

3ft (1m)

<

Note

• To avoid interference from other electronic devices,

place your baby monitor at least 3 feet (1 meter) away
from devices such as wireless routers, microwaves, cell

phones and computers.

Adjust speaker volume

Press VOL / VOL to adjust your parent unit
speaker volume. Even if you have set the parent
unit volume to the maximum, you may not hear
sound from the baby unit. It depends on the
sensitivity setting.

Set screen off timer

1. Press to enter the main menu when

the parent unit is idle.

2. Press or to choose , then press or

to open the submenu.

3. Press or to choose the desired time
period to automatically turn off screen ( /

- 5 min./ - 30 min. / - 60min.), then

press to confirm your selection.

Note

• Press any keys on the parent unit to turn on the screen

again.

Use the menu

Press to enter the menu, choose a menu item, or save a setting. You
can use the parent unit for advanced settings or operations, such as to
adjust the baby unit sound sensitivity or the temperature range for alerts.

While in the menu:

• Press or to scroll among the menu options.

• Press or to enter the desired submenu.

• Press or to select an item.

• Press to confirm

your selection.

• Press to exit the
menu or submenu.

Submenu

Main menu