VTech Telecommunications 80 0343 00 User Manual
VSP605
Range Extender
®
for use with VTech ErisTerminal
SIP DECT Base Station and Cordless Handsets
Quick Start Guide
Important Safety Information
This symbol is to alert you to important operating or servicing instructions
that may appear on the product or in this user’s manual. Always follow
basic safety precautions when using this product to reduce the risk of
injury, re, or electric shock.
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be
followed to reduce the risk of re, electric shock and injury, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water (for example, near a bathtub, kitchen sink,
swimming pool) or in humid areas.
5. Do not overload wall outlets and extension cords, as this can result in the risk of
re or electric shock.
6. Unplug this product from the wall outlet and refer servicing to VTech under the
following conditions:
• When the power supply cord or plug is damaged or frayed.
• If the product does not operate normally by following the operating
instructions.
• If the product has been dropped and the cabinet has been damaged.
• If the product exhibits a distinct change in performance.
7. Do not place this product on an unstable cart, stand, or table. The product can
fall, causing serious damage to the unit.
8. To protect the product from overheating, do not block or cover any slots or
openings in the base unit. This product should never be placed near or over
a radiator or heat register. This product should not be placed in a built-in
installation unless the proper ventilation is provided.
9. This product should be operated only from the type of power source indicated
on the marking label.
10. Do not allow anything to rest on the power cord. Do not locate this product
where the cord will be damaged by people walking on it.
2
11. Never push objects of any kind into this product through the unit slots, as they
may touch dangerous voltage points or short-out parts that could result in a risk
of re or electrical shock. Never spill liquid of any kind on the product.
12. Use only the AC power adapters supplied with this product.
13. For pluggable equipment, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
SAVE THESE INSTRUCTIONS
3
FCC part 15
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modications to this equipment not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.
CAUTION: To maintain the compliance with the FCC’s RF exposure guideline, place the
base unit at least 20 cm from nearby persons.
Industry Canada
This Class B digital apparatus complies with Canadian requirements:
CAN ICES-3 (B)/NMB-3(B).
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Privacy of communications may not be ensured when using this telephone.
The term ‘’IC:‘’ before the certication/registration number only signies that the
Industry Canada technical specications were met.
This product meets the applicable Innovation, Science and Economic Development
Canada technical specications.
4
Loading...