VTech Baby Shake & Move Puppy User Manual

User’s Manual

Shake & Move Puppy

91-002915-019

UK

146903 IM.indd 1 07/19/2018 15:36:09

146903 IM.indd 2 07/19/2018 15:36:12

3

Introduction

INTRODUCTION

Thank you for purchasing the VTech® Shake & Move Puppy learning
toy!

Learn and play with the interactive Shake & Move Puppy by VTech®!
Simply shake the bone-shaped rattle and the pup responds by walking,
laying down and turning around. Press one of the three buttons on the
puppy’s back to learn about colours, shapes, numbers and more!

ON/OFF/VOLUME
CONTROL SWITCH

BONE RATTLE

THREE SHAPE
BUTTONS

146903 IM.indd 3 07/19/2018 15:36:12

4

Included In This Package

a

b

c

INCLUDED IN THIS PACKAGE

• One VTech® Shake & Move Puppy learning toy

• One bone rattle

• One user’s manual

WARNING: All packing materials, such as tape, plastic sheets,

packaging locks and tags are not part of this toy,
and should be discarded for your child’s safety.

NOTE: Please keep user’s manual as it contains

important information.

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.

2. When the puppy is in the down position, the battery cover will be
difficult to remove.To change the batteries, ensure the puppy is in
the upright position.

3. Locate the battery cover on the bottom of
the unit. Use a screwdriver to loosen the
screw.

4. Install 4 new AA (AM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)

5. Replace the battery cover and tighten the
screw to secure.

146903 IM.indd 4 07/19/2018 15:36:15

5

Included In This Package

BATTERY NOTICE

• Use new alkaline batteries for maximum performance.

• Use only batteries of the same or equivalent type as recommended.

• Do not mix different types of batteries: alkaline, standard (carbon-zinc)

or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.

• Do not use damaged batteries.

• Insert batteries with the correct polarity.

• Do not short-circuit the battery terminals.

• Remove exhausted batteries from the toy.

• Remove batteries during long periods of non-use.

• Do not dispose of batteries in fire.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the toy before charging (if

removable).

• Rechargeable batteries are only to be charged under adult

supervision.

Disposal of batteries and product

The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.

The chemical symbols Hg, Cd or Pb, where marked, indicate
that the battery contains more than the specified value of
mercury (Hg), cadmium (Cd) or lead (Pb) set out in Battery

Directive (2006/66/EC).

The solid bar indicates that the product was placed on the
market after 13th August, 2005.

Help protect the environment by disposing of your product or
batteries responsibly.

For more information, please visit:

www.recycle-more.co.uk
www.recyclenow.com

146903 IM.indd 5 07/19/2018 15:36:15

6

Product Features /Activities

PRODUCT FEATURES

1. ON/OFF/VOLUME CONTROL SWITCH

To turn the unit ON, slide the ON/OFF/

VOLUME CONTROL SWITCH to the
LOW VOLUME ( ) or HIGH VOLUME

( ) position. To turn the unit OFF,
slide the ON/OFF/VOLUME CONTROL

SWITCH to the OFF ( ) position.

2. AUTOMATIC SHUT-OFF

To preserve battery life, the VTech® Shake & Move Puppy will

automatically power-down after approximately 100 seconds without
input. The unit can be turned on again by pressing any button.

ACTIVITIES

1. Slide the on/off/volume control switch

to turn the unit on. You will hear a playful
bark, a fun phrase and a giggling sound.

The light will ash and the puppy will

move around.

2. Shake the bone rattle to see the

puppy move forward, stand up and lay
down. You will hear a variety of playful
sounds and voice responses. The puppy
responds best when you shake the bone
within a four-foot range from the puppy.

146903 IM.indd 6 07/19/2018 15:36:17

7

Activities & Melody List

3. Press the light-up triangle button on

the back of the puppy to hear the colour

and shape identied and fun sing-along
songs. The light will ash and the puppy

will move around.

4. Press the square button on the back of

the puppy to hear the colour and shape

identied as well as a playful phrase
teaching numbers. The light will ash and

the puppy will move around.

5. Press the circle button on the back of

the puppy to hear the colour and shape

identied as well as a playful phrase
teaching letters. The light will ash and

the puppy will move around.

MELODY LIST

1. BINGO

2. Farmer in the Dell

3. Where Has My Little Dog Gone?

4. Did You Ever See a Lassie?

5. One, Two, Buckle My Shoe

6. Lazy Mary Will You Get Up

7. Looby Loo

8. Mufn Man

9. Diddle Diddle Dumpling

10. A-Tisket, A-Tasket

146903 IM.indd 7 07/19/2018 15:36:18

8

Sing-Along Songs & Care & Maintenance

SING-ALONG SONG LYRICS

SING-ALONG SONG 1

Look at me,
I can do tricks!
Shake the bone,
And you will see,
I will run and sing and play!

SING-ALONG SONG 2

Stand up, sit down,
Run around and lay down.
I’m a puppy on the go!

CARE & MAINTENANCE

1. Keep the unit clean by wiping it with a slightly damp cloth.

2. Keep the unit out of direct sunlight and away from any direct heat
source.

3. Remove the batteries when the unit will not be in use for an extended
period of time.

4. Do not drop the unit on hard surfaces and do not expose the unit

to moisture or water.

Unlock the packaging locks:

Turn the packaging lock counter­clockwise several times.
Pull out and discard the packaging lock.

146903 IM.indd 8 07/19/2018 15:36:18

9

Troubleshooting

TROUBLESHOOTING

If for some reason the program/activity stops working or malfunctions,

please follow these steps:

1. Please turn the unit OFF.

2. Interrupt the power supply by removing the batteries.

3. Let the unit stand for a few minutes, then replace the batteries.

4. Turn the unit ON. The unit should now be ready to play again.

5. If the product still does not work, replace with a new set of batteries.
If the problem persists, please contact our Consumer Services

Department and a service representative will be happy to help you.

146903 IM.indd 9 07/19/2018 15:36:18

CONSUMER SERVICES

Creating and developing VTech products is accompanied by a
responsibility that we at VTech® take very seriously. We make every
effort to ensure the accuracy of the information, which forms the
value of our products. However, errors sometimes can occur. It is
important for you to know that we stand behind our products and

encourage you to call our Consumer Services Department with

any problems and/or suggestions that you might have. A service
representative will be happy to help you.

UK Customers:

Phone: [phone] (from UK) or [phone] (outside UK)
Website: www.vtech.co.uk/support

Australian Customers:

Phone: [phone]
Website: support.vtech.com.au

NZ Customers:

Phone: [phone]
Website: support.vtech.com.au

PRODUCT WARRANTY/
CONSUMER GUARANTEES

UK Customers:

Read our complete warranty policy online at vtech.co.uk/warranty.

Australian Customers:

VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED –
CONSUMER GUARANTEES

Under the Australian Consumer Law, a number of consumer guarantees

apply to goods and services supplied by VTech Electronics (Australia)

Pty Limited. Please refer to vtech.com.au/consumerguarantees for
further information.

10

Consumer Srevices

146903 IM.indd 10 07/19/2018 15:36:18

TM & © 2014 VTech Holdings Limited.

All rights reserved.

Printed in China.

91-002915-019

UK

Visit our website for more
information about our products,
downloads, resources and more.

www.vtech.co.uk

www.vtech.com.au

146903 IM.indd 11 07/19/2018 15:36:19