ht t p:// hk p h o n e s .v t e c h . c o m
Models: ES1510A/
ES1510-0A
Indicates when more characters are existed before the text
currently displayed.
Indicates when more characters are existed after the text
currently displayed.
Indicates when new call.
Turn off when new call has been read.
Scroll up / down the menu items / Phonebook list / Redial list /
Call List.
1. GET TO KNOW YOUR PHONE
In idle mode: Press to access the main menu.
In sub-menu mode: Press to conrm the selection.
During a call: Press to access Intercom/Phonebook/Redial List/Call List.
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous level.
In sub-menu mode: Press and hold to go back to idle screen.
In editing/predialing mode: Press to clear a character/digit.
In editing/predialing mode: Press and hold to delete all the
characters/digits.
During a call: Press to mute/unmute the microphone.
In idle mode: Press to intercom another handset.
In ringing: Press to suppress handset ringer.
1.
2.
3.
In idle mode: Press to access the call list.
In menu mode: Press to scroll up the menu items.
In Phonebook list/Redial list/Call List: Press to scroll up the list.
During a call: Press to increase the volume.
In ringing: Press to increase the ringer volume.
4.
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In Phonebook list/Redial list/Call List: Press to scroll down the list.
During a call: Press to decrease the volume.
In ringing: Press to decrease the ringer volume.
5.
During a call: Press to end a call and go back to idle screen.
In menu/editing mode: Press to go back to previous menu.
In menu/editing mode: Press and hold to go back to idle screen.
In idle mode: Press and hold to power off the handset.
In idle mode: Press and hold to power on the handset.
6.
In idle/predialing mode: Press to insert a ash.
During a call: Press to dial a ash.
7.
In idle mode: Press to access the phonebook list.
8.
During a call: Press to turn on/off the speakerphone.
In Idle mode/Predialing mode/Redial list/Call List/Phonebook entry:
Press to make a call with speakerphone.
During ringing: Press to answer a call with speakerphone.
9. ALPHANUMERIC KEYPAD, ,
* key in idle mode: Press and hold to enable or disable the keypad lock.
# key in idle mode: Press and hold to turn on/off the ringer.
# key in call list mode: Press to review caller’s number if applicable.
0 key in predialing/number editing mode: Press and hold to insert
a pause (P).
1, 2, 3 key in idle/off hook mode, press and hold to dial the stored direct
memory number.
10.
In idle/predialing mode: Press to make a call.
In Redial list/Call List/Phonebook entry: Press to make a call to the
selected entry in the list.
During ringing: Press to answer a call.
1.1 Handset Overview
1.2 Base Station Overview
1.
Press on the base station to page your handset. It will ring for
approximately 60 seconds.
Press and hold on the base station for about ve seconds, the base
station is entered into registration mode and allows handset registration.
1.3 Display Icons and Symbols
Steadily on when the handset is in range of the base.
Flash when out of range of the base or not registered to the
base.
Steady when an intercom is in progress.
Flashes when there is an incoming intercom call.
Indicates a call is in progress.
Indicates that handsfree is being used.
Steady when an alarm is set.
Flashes when the alarm time set before reaches.
Indicates that the keypad is locked.
Indicates when there are received new Voice Message Waiting
(VMWI) not yet read.
Disappear when all the voice messages have been read.
(Network service dependent)
Indicates that the ringer is switched off.
Indicates when the battery is fully charged.
Whole icon ashes when the battery performs initial charging.
Internal block icon ashes when the battery is in nal charging stage.
Indicates when the battery needs charging.
Flashes when low battery power level is detected.
2. PRECAUTIONS
The signal quality will depend on the location and environment of
the base and handset.
Position your ES1510A away from sources of excessive heat (radiators,
direct sunlight, etc.) and protect it from vibrations and dust. Never allow your
telephone to come into contact with water or other liquids, or with aerosols.
To reduce the risk of interference and optimize reception, take particular
care not to install the base in the immediate vicinity of windows, large metal
objects, reinforced concrete, televisions, music centres, VCR or DVD
players, halogen lamps or heating devices, uorescent lighting, burglar
alarms, microwave ovens, computers, etc. This telephone requires an
electrical power supply in order to function.
To clean your ES1510A, use an antistatic cloth lightly moistened with water.
Note:
Your ES1510A is a DECT™* standard appliance designed to receive
and transmit telephone calls. It is designed for connection to the public
telecommunications network.
User’s manual
3. INSTALL YOUR PHONE
3.1 Install and Charge the batteries
Slide down to open the battery compartment cover.
Place the 2 supplied AAA rechargeable batteries as indicated. Pay
extra attention to direction of polarity.
Slide the battery compartment cover back.
Put the handset on the base and charge for 15 hours before using
the handset for the rst time. The handset will give a beep when it is
properly placed on the base or charger.
Notes:
Use only the supplied NiMH rechargeable batteries.
If the handset will not be used for a long time, disconnect and
remove the batteries to prevent possible leakage.
1.
2.
3.
4.
•
•
3.2 Connect the Base Station
Plug one end of the telephone line cord into the telephone jack on
base bottom.
Plug the small end of power adapter into a power jack on base bottom.
Connect the power supply plug to the base jack horizontally, and route
the power supply cord through the slot.
Plug the large end of power adapter into a wall power outlet.
Plug the other end of the telephone line cord in to the telephone jack or
micro-lter.
Note:
Always use the cables provided in the box.
1.
2.
3.
4.
5.
3.3 Connect the Charger(s) (for Duo/Trio models)
Plug the power adapter into mains socket.
If you have a Broadband line
If you connect your telephone to a line with a broadband connection, you
will need to insert a micro-lter between the telephone and the telephone
line, otherwise you may get interference between the telephone and the
broadband, which could cause problems.
In a home with broadband, every telephone must have a microlter
connected, not just the one at the telephone point that your modem is
connected to. If you need more broadband microlters, contact your
broadband supplier.
4. USING YOUR PHONE
4.1 Make a call
4.1.1 Preparatory Dialing
4.1.2 Direct Dialing
Enter the phone number and press or to dial the number.
Press to clear the entry.
Press or to take the line and enter the phone number.
If you have broadband service,
a micro-lter (not included) is required.
4.1.3 Dial from Direct Memory Keys
4.1.4 Call from the Redial List
In idle or off hook mode, press and hold / / to dial the direct
memory number. You have to store number to the related key rst. See
section 7.4 for reference.
Press to access the redial list and press / to select the desired redial
number. Press or to dial out to the selected redial number.
5. PRIVATE PHONEBOOK
Your phone can store up to 50 private phonebook entries with names and
numbers. Each phonebook entry can have a maximum of 20 digits for the
phone number and 12 characters for the name. You can also select different
ringtones for your phonebook entries. Phonebook entries are stored
alphabetically by name.
5.1 Add a New Phonebook Entry
5.2 Call from the Phonebook
In Idle:
Press to access the phonebook.
OR
Press and / to select PHONEBOOK main menu item and then
press to access the phonebook.
Press to select ADD.
Press to enter the name.
Press to enter the number.
Press and / to select the desired ringtone for your phonebook entry.
Press to store the phonebook entry.
1.
2.
3.
4.
5.
In Idle:
Press to access the phonebook.
OR
Press and / to select PHONEBOOK main menu item and
then press to access the phonebook.
Press or to dial out to the selected phonebook entry.
1.
2.
1
2
10
3
5
6
8
7
4
1
9
This feature is available if you have subscribed the Caller Line
Identication service with your telephone service provider. Your
phone can store up to 20 received calls with date/time information in
the Call List. The number will be shown on the LCD when the phone
is ringing. If the number matches with one of the entries in your
Private Phonebook, the caller’s name stored in the private phonebook
will be displayed alternatively with the number. The handset will ring
with the melody associated with that phonebook entry.
If the caller number is disabled to send caller information,
“WItHHeLD” will display. If the caller number is not provided, “oUt
oF AReA” will display. In standby, if three unanswered calls are
received, “3 NeW CALLs” will be displayed.
6. CALLER DISPLAY (NETWORK DEPENDENT)
6.1 View the Call List
6.2 Call from the Call List
All received calls are saved in Call List with the latest call putting
at the top of the list. When the call list is full, the oldest call will
be replaced by a new call. The unanswered call which has not
been read is marked with a at the centre of the bottom line of
the display.
Press to access the call list.
OR
Press and / to select CALL LIST.
Press / to select the desired entry.
Press to view the caller’s number if applicable.
1.
2.
3.
Press to access the call list.
OR
Press and / to select CALL LIST.
Press or to dial out to the selected phonebook entry.
1.
2.
7. PHONE SETTINGS
7.1 Set the Ringer Melody for Internal/External Calls
7.2 Set the Ringer Volume
7.3 Adjust Earpiece and Handsfree Volume
7.4 Store Direct Memory Access Number
8. REGISTRATION
9. TECHNICAL SPECIFICATIONS
10. TROUBLESHOOTING
Press and / to select HS SETTINGS.
Press and / to select RING SETUP.
Press and / to select INT RING or EXT RING.
Press and / to select the desired ringer melody from the
melody list.
Press to conrm.
Note:
The respective ringer melody will be played while browsing the
melody list.
1.
2.
3.
4.
5.
Press and / to select HS SETTINGS.
Press and / to select RING SETUP.
Press and / to select RING VOLUME.
Press and / to select the desired ringer volume (a total of 6
ringer volume levels including VOLUME OFF).
Press to conrm.
Note:
The respective ringer volume will be played during your selection. If
VOLUME OFF is selected, icon will display.
1.
2.
3.
4.
5.
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for
each of earpiece and handsfree volume.
During a call:
Press
/
to select volume 1-5. The current setting is shown. When
you end the call, the setting will remain at the last selected level.
You can store three direct access numbers into digit KEY 1, KEY 2
and KEY 3, which will be convenient for you to dial to these
numbers directly.
Press and / to select HS SETTINGS.
Press and / to select DIRECT MEM.
Press and / to select any one from KEY 1, KEY 2 and KEY 3.
Press and then enter the number you would like to store, or edit the
number existed before.
Press to conrm.
Note:
Press and hold
, , or
to call the stored number.
1.
2.
3.
4.
5.
Your handset and base station is pre-registered. Up to ve handsets
can be registered to a single base station.If for some reason, the
handset is not registered to the base station ( ashes even when
the handset is near the base station), register your handset according
to the following procedure.
Press and hold on the base station for about ve seconds, the base
station is entered into registration mode.
Press and / to select REGISTRATION.
Press and you are requested to enter the 4-digit system PIN
(default PIN is 0000).
Enter the 4-digit system PIN.
Press to conrm.
1.
2.
3.
4.
5.
If the handset registration is successful, you will hear a
conrmation tone and the will stop ashing. The handset will
automatically be allocated the next available handset number. This
handset number is shown in the handset display in standby mode.
If the handset registration is unsuccessful, the will still ash.
Free Field Range Up to 300 metres*
Indoor Range Up to 50 metres*
Handset Battery Life
(average values)
10 hours talk time**
100 hours standby**
Number of Handsets Up to 5
Electrical Connection/
Base Mains Adaptor/
Charger
Base main adaptor:
Model No.:
VT04EUK06045
Input: 100-240 V/50-60 Hz/0.15 A
Output: 6 V DC/450 mA
Charger adaptor:
VT04EUK06045
Input: 100-240 V/50-60 Hz/0.15 A
Output: 6 V DC/450 mA
Only use the adaptors supplied with
the telephone
Batteries Corun - Ni-MHAAAJ400 - 1.5V 400mAh
x 2 Ni-MH battery
GPI - VT40AAAHC - 1.5V 400mAh x 2
Ni-MH battery
Only use the batteries supplied with the
telephone.
Use any other type of battery presents a
risk of explosion.
Used batteries must be disposed of in
compliance with current environmental
protection regulations.
Operating Temperature
From 5°C to 40°C
* Values may vary according to environment.
** Depending on initial battery charge.
If you have difculty with your phone, please try the suggestions
listed below.
As a general rule, if a problem occurs, remove the batteries from
all the handsets in your installation for about 1 minute, then
disconnect and reconnect the power supply to the base and
reinstall the handset batteries.
Problem Cause Solutions
No dialing
tone when
pressing
key
a. The connection cord
of the base station
is not plugged in.
b. The adapter cord
is not plugged in
correctly in the
base station.
c. The line is busy,
as another handset
is used.
d. Wrong connection
cord.
a. Check the connections.
Unplug and plug back
in the mains. Check
that the telephone line
cord has been plugged
into the base station
and the phone socket.
b. Check the base station
plug and the 220V plug
(remove and plug-in).
c. Wait until the line
is unoccupied.
d. Use the original
connection cord.
“OUT OF
RANGE” is
displayed.
a. Base station out
of range.
b. Base station not
connected to mains.
a. Reduce the range.
b. Connect base station
to mains.
The call does
not work.
Service not activated
or wrong operator.
Check your subscription
with network.
No display. Empty battery. Recharge battery.
Please contact the technical support of the network provider for
further information. This telephone is not equipped with a grounding
function! Therefore some of the functions may be limited when used
in PBX systems.
Technical Support
For technical support, please call VTech Technical Inquiry Hotline
852-2667 7433. Please read out the serial number of this telephone
to Technical Center. The serial number can be found in the battery
compartment after having the batteries removed.
Take care of your telephone
Your cordless telephone contains sophisticated electronic parts,
so you must treat it with care.
Avoid rough treatment.
Place the handset down gently.
Save the original packing materials to protect your telephone if
you ever need to ship it.
Avoid water
You can damage your telephone if it gets wet. Do not use the
handset in the rain, or handle it with the wet hands. Do not install
the telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges harmful to
electronic equipment. For your own safety, take caution when
using electric appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that should retain
its luster for many year. Clean it only with a soft cloth slightly
dampened with water or a mild soap.
Do not use excess water or cleaning solvents of any kind.
Note
Remember that electrical appliances can cause serious injury if
used when you are wet or standing in water. If the telephone base
should fall into water. DO NOT RETRIEVE IT UNTIL YOU UNPLUG
THE POWER CORD AND TELEPHONE LINE CORDS FROM THE
WALL. Then pull the unit out by the unplugged cords.
CAUTION
DISCONNECT ALL TELEPHONE LINE FROM THE
WALL-OUTLET BEFORE REPLACING BATTERY.
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
•
•
•
•
•
•
•
•
12. CARE AND MAINTENANCE INSTRUCTIONS
11. IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of re, electric shock
and injury, including the following:
Read and understand all the instructions.
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Do not use this product near water (for example, near a bath
tub, kitchen sink, swimming pool).
Do not expose the telephone to direct sunlight or extreme cold
environment. Do not put the telephone close to heating sources
such as radiators, cookers, etc.
Do not overload wall outlets and extension cords as this can
result in the risk of re or electric shock.
Unplug this product from the wall outlet and refer servicing to
VTech under the following conditions:
When the power supply cord or plug is damaged or frayed.
If the product does not operate normally by following the
operating instructions.
If the product has been dropped and the cabinet has
been damaged.
If the product exhibits a distinct change in performance.
1.
2.
3.
4.
5.
6.
7.
•
•
•
•
Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock
from lightning.
Do not use the telephone to report a gas leak in the vicinity of
the leak.
Use only the supplied NiMH (Nickel Metal Hydride) batteries!
The operation periods for the handsets are only applicable with
the default battery capacities.
The use of other battery types or non-rechargeable batteries/
primary cells can be dangerous. These may cause interference
and/or unit damages. The manufacturer will not be held liable for
damage arising from such non-compliance.
Do not use third party charging bays. The batteries may be
damaged.
Please note the correct polarity while inserting the batteries.
Do not immerse batteries in water, do not place in re.
DISPOSAL WARNING
When this crossed-out wheeled bin symbol is
attached to a product, it means the product is
covered by the European Directive 2002/96/EC.
All electrical and electronic products/battery should
be disposed of separately from the municipal waste
stream via designated collection facilities appointed
by the government or the local authorities.
The correct disposal of your old appliance/battery will help
prevent potential negative consequences for the environment
and human health.
For more detailed information about disposal of your old appliance/
battery, please contact your city ofce, waste disposal service or The
Shop where you purchased the product.
If you have questions about this product, or having difculty with
setup or operation, call or Customer Service Centre.
Customer Service Hotline: (852) 2666 5558
Technical Inquiry Hotline: (852) 2667 7433
8.
9.
10.
11.
12.
13.
14.
1.
2.
3.
Customer Service Centre
Suite 1601, Lever Tech Centre, 69-71 King Yip Street,
Kwun Tong, Kowloon, Hong Kong.
Customer Service Hotline: (852) 2666 5558
Technical Inquiry Hotline: (852) 2667 7433
VTECH TELECOMMUNICATIONS LTD.
A member of THE VTECH GROUP OF COMPANIES.
© 2013 VTech Telecommunications Ltd. All Rights Reserved.
Loading...