Models: ES1310/
ES1310-2/ES1320/
ES1320-2
User’s manual
www.vtech.com
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS ................................................ 1
2. SET UP THE TELEPHONE .................................................................... 3
2.1 Package Contents ......................................................................................3
2.2 Location ......................................................................................................3
2.3 Connect the Base Station ..........................................................................4
2.4 Connect the Charger (For ES1310-2 & ES1320-2 only) ............................4
2.5 Install and Charge the Handset Batteries ..................................................5
3. GET TO KNOW YOUR PHONE .............................................................. 6
3.1 Overview of the Handset ............................................................................6
3.2 Overview of the Base Station .....................................................................8
3.2.1 Base Station (ES1320/ES1320-2) ................................................8
3.2.2 Base Station (ES1310/ES1310-2) ..............................................10
3.3 Handset LCD Display Icons and Symbols ...............................................10
3.4 Menu Structure .........................................................................................12
3.5 Text and Digit Entry Table .........................................................................13
3.5.1 English Character Set .................................................................13
4. USE YOUR PHONE .............................................................................. 14
4.1 Make a Call ..............................................................................................14
4.1.1 Preparatory Dialling ....................................................................14
4.1.2 Direct Dialing...............................................................................14
4.1.3 Call from the Phonebook ............................................................14
4.1.4 Call from the Call List ..................................................................14
4.1.5 Call from the Redial List ..............................................................14
4.1.6 Call Timer ....................................................................................14
4.2 Answer a Call ..........................................................................................14
4.3 End a Call .................................................................................................15
4.4 Adjust Earpiece and Handsfree Volume ...................................................15
4.5 Mute a Call ...............................................................................................15
4.6 Turn the Ringer On/Off .............................................................................15
4.7 Turn the Keypad Lock On/Off ...................................................................15
4.8 Redial the Last Number ...........................................................................15
4.8.1 Redial a Number from the Redial List .........................................16
4.8.2 Store a Redial Number into the Phonebook ...............................16
4.8.3 Delete a Redial Number..............................................................16
4.8.4 Delete the Entire Redial List .......................................................16
4.9 Find the Handset ......................................................................................17
4.10 Make an Internal Call ...............................................................................17
4.10.1 Call Another Handset ..................................................................17
4.10.2 Call All Handsets .........................................................................17
4.10.3 Transfer an External Call to Another Handset.............................18
4.10.4 Make a 3-way Conference Call ...................................................18
4.11 Flashing Message Indicator .....................................................................18
4.12 Call Waiting ..............................................................................................19
5. PHONEBOOK ....................................................................................... 20
5.1 Add a New Phonebook Entry ...................................................................20
5.2 Search a Phonebook Entry ......................................................................20
5.3 View a Phonebook Entry ..........................................................................20
5.3 Dial a Phonebook Entry ...........................................................................20
5.3.1 To Search Alphabetically .............................................................21
5.4 Edit a Phonebook Entry ...........................................................................21
5.5 Delete a Phonebook Entry .......................................................................21
5.6 Delete the Entire Phonebook ...................................................................21
5.7 Check the Phonebook Usage ..................................................................21
6. CALLER DISPLAY (NETWORK DEPENDENT) ................................... 22
6.1 View the Call List ......................................................................................22
6.2 Store a Call List Number into the Phonebook ..........................................22
6.3 Delete an Entry in the Call List .................................................................23
6.4 Delete the Entire Call List .........................................................................23
6.5 View the Details of the Call List Entry ......................................................23
7. PHONE SETTINGS ............................................................................... 24
7.1 Date and Time Settings ............................................................................24
7.1.1 Change the Date Format ............................................................24
7.1.2 Change the Time Format ............................................................24
7.1.3 Set the Time ................................................................................24
7.1.4 Set the Date ................................................................................25
7.2 Alarm Settings ..........................................................................................25
7.2.1 Turn On/Off the Alarm .................................................................25
7.2.2 Set the Alarm Time (If the Alarm is Set to be ON).......................26
7.3 Handset Settings ......................................................................................26
7.3.1 Set the Ringer Melody for Internal Calls .....................................26
7.3.2 Set the Ringer Melody for External Calls ....................................26
7.3.3 Set the Ringer Volume ................................................................27
7.3.4 Set Alert Tones ............................................................................27
7.3.5 Rename the Handset ..................................................................27
7.3.6 Choose the Information to be Displayed in Idle ..........................27
7.3.7 Set the Auto Answer....................................................................28
7.4 Base Settings ...........................................................................................28
7.4.1 Set the Base Ringer Melody (For ES1320/1320-2 only) .............28
7.4.2 Set the Ringer Volume (For ES1320/1320-2 only)......................28
7.4.3 De-register a Handset .................................................................29
7.4.4 Change the Recall (Flash) Time .................................................29
7.4.5 Change the System PIN Code ....................................................29
7.4.6 ECO Mode Setting ......................................................................30
7.5 Registration ..............................................................................................30
7.6 Reset Your Phone ....................................................................................30
8. ANSWERING SYSTEM (FOR ES1320/1320-2 ONLY) ......................... 31
8.1 Turn On/Off the Answering System ..........................................................31
8.1.1 Through the Base .......................................................................31
8.1.2 Through the Handset ..................................................................31
8.2 Listen to the Messages in the Answering System ....................................32
8.2.1 Listen to New Messages through the Base ................................32
8.2.2 Listen to New Messages through the Handset ...........................32
8.3 Delete All Messages in the Answering System ........................................33
8.3.1 Delete All Messages through the Base .......................................33
8.3.2 Delete All Messages through the Handset: .................................33
8.4 Record Memo ...........................................................................................33
8.5 Answering System Settings ......................................................................34
8.5.1 Set the Answer Mode ..................................................................34
8.6 Record Your Own Outgoing Message (OGM) ..........................................34
8.7 Playback and Delete the Outgoing Message (OGM) ...............................34
8.7.1 Playback the OGM ......................................................................35
8.8 Delete the Personalised OGM .................................................................35
8.9 Set the Answer Delay ...............................................................................35
8.10 Set the Recording Time of Incoming Message ........................................36
8.11 Activate Remote Access ...........................................................................36
8.11.1 Change the 4-digit Remote Access PIN ......................................36
8.11.2 Activate or Deactivate the Remote Access .................................36
8.11.3 Access Your Answering System Remotely ..................................37
8.11.4 Remote Commands ....................................................................38
9. DEFAULT SETTINGS ........................................................................... 39
10. TROUBLESHOOTING .......................................................................... 40
11. TECHNICAL SPECIFICATIONS ........................................................... 43
12. CARE AND MAINTENANCE INSTRUCTIONS .................................... 44
13. TECHNICAL SUPPORT ....................................................................... 45
1
IMPORTANT SAFETY INSTRUCTIONS
1. IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always be
followed to reduce the risk of re, electric shock and injury, including the following:
Read and understand all the instructions.
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
Do not use this product near water (for example, near a bath tub, kitchen sink,
swimming pool).
Do not expose the telephone to direct sunlight or extreme cold environment. Do not
put the telephone close to heating sources such as radiators, cookers, etc.
Do not overload wall outlets and extension cords as this can result in the risk of re
or electric shock.
Unplug this product from the wall outlet and refer servicing to VTech under the
following conditions:
When the power supply cord or plug is damaged or frayed.
If the product does not operate normally by following the operating instructions.
If the product has been dropped and the cabinet has been damaged.
If the product exhibits a distinct change in performance.
Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation periods
for the handsets are only applicable with the default battery capacities.
The use of other battery types or non-rechargeable batteries/primary cells can be
dangerous. These may cause interference and/or unit damages. The manufacturer
will not be held liable for damage arising from such non-compliance.
Do not use third party charging bays. The batteries may be damaged.
Please note the correct polarity while inserting the batteries.
Do not immerse batteries in water, do not place in re.
DISPOSAL WARNING
When this crossed-out wheeled bin symbol is attached to a product, it
means the product is covered by the European Directive 2002/96/EC.
All electrical and electronic products/battery should be disposed of
separately from the municipal waste stream via designated collection
facilities appointed by the government or the local authorities.
1.
2.
3.
4.
5.
6.
7.
•
•
•
•
8.
9.
10.
11.
12.
13.
14.
1.
2.
2
The correct disposal of your old appliance/battery will help prevent potential negative
consequences for the environment and human health.
For more detailed information about disposal of your old appliance/battery, please
contact your city ofce, waste disposal service or The Shop where you purchased the
product.
3.
3
SET UP THE TELEPHONE
2. SET UP THE TELEPHONE
2.1 Package Contents
The package contains the following items:
ES1310 ES1310-2 ES1320 ES1320-2
Handset 1 2 1 2
Base station 1 1 1 1
AC power
adapter
1 1 1 1
Charger 1 1
Telephone line
cord
2 2 2 2
AAA
rechargeable
batteries
2 4 2 4
User’s manual 1 1 1 1
Warranty card 1 1 1 1
2.2 Location
For maximum coverage and reduce the interference, here are some guidelines you
should consider when you place the base unit:
place it at a convenient, high, and central location with no obstructions between the
handset and base unit in an indoor environment.
place it away from electronic appliances such as televisions, microwave ovens,
radios, personal computers, wireless devices or other cordless phones.
avoid facing radio frequency transmitters, such as external antennas of mobile
phone cell stations.
avoid plugging it into the same circuit as other major household electrical
appliances because of the potential interference. Try moving the appliance or the
base unit to another power outlet.
The maximum range between the base station and the handset is approximately
300 meters.
If the reception for a base unit location is not satisfactory, move it to another location
for better reception.
Depending on the surrounding conditions as well as spatial and structural factors, the
range may be reduced. The range indoors is normally less than outdoors.
-
-
-
-
4
2.3 Connect the Base Station
Plug the mains power cable into the base station, the other end of the power adapter
into the wall outlet not controlled by a wall switch.
Plug one end of the telephone line cord into the base station and the other end into
the telephone wall socket. If you have DSL high speed internet service, a DSL lter
(not included) is required.
NOTES
Always use the cables supplied with the product.
Use only the power adapter supplied with the base station.
2.4 Connect the Charger (For ES1310-2 & ES1320-2 only)
Plug the power cable into the charger base.
Plug the other end into a power wall socket not controlled by a wall switch.
1.
2.
1.
2.
1.
2.
Power adapter cable
Line Cord
Power adapter cable
5
SET UP THE TELEPHONE
2.5 Install and Charge the Handset Batteries
Slide open the battery compartment cover to t the NiMH rechargeable batteries
into the handset.
Place the two batteries as indicated. Check that the polarity is correct.
Slide the battery compartment cover back until it clicks into place.
Place the handset on the base to charge for at least 14 hours. When the
handset is fully charged the will be steady on screen. A beep indicates that the
handset is properly placed on the base or charger.
NOTES
Use only the supplied NiMH rechargeable batteries.
If you do not use the handset for a long time, disconnect and remove the batteries
to prevent possible leakage.
1.
2.
3.
4.
1.
2.
6
3. GET TO KNOW YOUR PHONE
3.1 Overview of the Handset
EARPIECE
CALL LIST / UP
In idle mode: Press to access the call list.
In menu mode: Press to scroll up the menu items.
In Phonebook list / Redial list / Call List: Press to scroll up the list.
During a call: Press to increase the volume.
When ringing: Press to increase the ringer volume.
REDIAL LIST / DOWN
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In Phonebook list / Redial list / Call List: Press to scroll down the list.
During a call: Press to decrease the volume.
When ringing: Press to decrease the ringer volume.
MENU / OK
In idle mode: Press to access the main menu.
In sub-menu mode: Press to conrm selection shown on-screen.
During a call: Press to access Intercom / Phonebook / Redial List / Call List.
1.
2.
3.
4.
12
11
10
9
8
7
6
5
4
3
2
1
7
GET TO KNOW YOUR PHONE
CLEAR / BACK /MUTE / INTERCOM
In main menu mode: Press to return to idle screen.
In sub-menu mode: Press to return to previous level.
In sub-menu mode: Press and hold to return to idle screen.
In editing / predialling mode: Press to clear a character / digit.
In editing / predialling mode: Press and hold to delete all the characters / digits.
During a call: Press to mute / unmute the microphone.
In idle mode: Press to use the intercom to contact another handset.
When ringing: Press to temporarily turn off the handset ringer.
TALK ON
In idle / predialling mode: Press to make a call.
In Redial list / Call List / Phonebook entry: Press to make a call to the selected
entry in the list.
During ringing: Press to answer a call.
TALK OFF
During a call: Press to end a call and return to idle screen.
In menu / editing mode: Press to return to previous menu.
In menu / editing mode: Press and hold to return to idle screen.
In idle mode: Press and hold to power off the handset.
In idle mode (when the handset is powered off): Press and hold to power on the
handset.
ALPHANUMERIC KEYPAD, (STAR), (HASH)
Press to insert a digit / character / * / #
key in idle mode: Press and hold to access the voicemail.
key in idle mode: Press and hold to enable or disable the keypad lock.
key in idle mode: Press and hold to turn on / off the ringer.
key in predialling / number editing mode: Press and hold to insert a pause (P).
key in Call List / Redial List mode: Press to review caller’s number if applicable.
SPEAKERPHONE
During a call: Press to turn on / off the speakerphone.
In Idle mode / predialling mode / Redial list / Call List / Phonebook entry: Press to
make a call with speakerphone.
During ringing: Press to answer a call with speakerphone.
RECALL
To activate Recall for use with Network services such as Call Waiting.
PHONEBOOK
In idle mode: Press to access the phonebook list.
MICROPHONE
5.
6.
7.
8.
9.
10.
11.
12.
8
3.2 Overview of the Base Station
3.2.1 Base Station (ES1320/ES1320-2)
DELETE
Press once to delete the message during playback. Press and hold to delete all the
messages in idle mode.
Note: New voice messages will not be deleted.
VOLUME UP (+)
Increase speaker volume during message playback or increase the base ringer
volume when there is an incoming external call.
SKIP FORWARD
Press to skip the current message and play the next message.
PAGE
Press on the base to page your handset. The handset will ring for approximately
60 seconds.
7-Segment LED DISPLAY
-- Steady: When answering system is OFF.
Flash: When answering system is ON.
00 Steady: No voice messages in answering system.
XX Flashing: There are XX new voice messages received where XX is from
01 to 59 or when playing new messages.
Steady: Playing the current XX incoming old message.
XX/FF Flashing XX alternatively with FF: There are XX new voice messages
received where XX is from 01 to 59 and the memory of the answering
system is full.
Flashing FF only: Answering system is full and only old voice messages
are being stored in the answering system memory.
1.
2.
3.
4.
5.
9
3
8
6
1
5
4
2
10
7
9
GET TO KNOW YOUR PHONE
--/XX Flashing XX alternatively with --: Time is not set and there are XX new
voice messages received where XX is from 01 to 59.
Flashing -- only: Time is not set and there are only old voice messages
in the answering system memory.
YY Steady: There are YY old voice messages (no new voice messages).
XX/AN Flashing XX alternatively with An: XX incoming message is now
recording.
LA Flashing:
Remote access is in progress.
Playing the current outgoing message.
Recording the memo.
LX Steady: Indicates the current volume level where X is from 1 to 8.
PLAY / STOP
Press to play the message.
Press to stop the message playback.
SKIP BACKWARD
Press to repeat playing the current message from the beginning. Press twice to
skip backward to the previous message.
VOLUME DOWN (-)
Decrease speaker volume during message playback or decrease the base ringer
volume when there is an incoming external call.
ANSWERING SYSTEM ON / OFF
Press to turn on the answering system. Press again to turn off the answering
system.
CHARGING CRADLE
6.
7.
8.
9.
10.
10
3.2.2 Base Station (ES1310/ES1310-2)
PAGE
Press the Page on the base station to page your handset. It will ring for
approximately 60 seconds.
CHARGING CRADLE
3.3 Handset LCD Display Icons and Symbols
The LCD display gives you information on the current status of the telephone.
p
q
Scroll up / down the menu items / Phonebook list / Redial list / Call
List.
Steady when the handset is in range of the base.
Flashes when out of range of the base or not registered to the base.
Steady when an intercom is in progress.
Flashes when there is an incoming internal call.
1.
2.
2
1
p
q
p
q
11
GET TO KNOW YOUR PHONE
Indicates a call is in progress.
Indicates that handsfree is being used.
Indicates that the ringer is switched off.
Steady when an alarm is set.
Flashes when the alarm sounds.
Indicates that the keypad is locked.
Indicates when the batteries are fully charged.
Flashes when the unit is charging.
Indicates when the batteries need charging.
Flashes when low battery power level is detected.
p
Indicates when there are more digits before the text currently
displayed.
q
Indicates when there are more digits after the text currently displayed.
Press the beneath this symbol to select more menu options if
applicable.
Press the beneath this symbol to conrm the current selection if
applicable.
Press the beneath this symbol to conduct
Intercom call when idle.
Press the beneath this symbol to return to previous menu level or
cancel the current action if applicable.
Press the beneath this symbol to clear a character or stop the
alarm if applicable, press to mute / unmute during a call.
Indicates when you have new messages from your telephone service
provider.
Indicates an unanswered call in the Call List.
(For
ES1320/
ES1320-2
only)
Indicates when the telephone answering system is turned on.
Flashes when new messages are received.
12
3.4 Menu Structure
In idle mode, press to access the main menu. Use
p
q
to scroll through the
menu. Refer to the following for the menu structure.
Key Press
Main Menu CALL LIST PHONEBOOK BS SETTINGS
Sub menu Review Call List
Under a
selected Call
List entry:
ADD TO PB
DELETE
DELETE ALL
DETAILS
Review
Phonebook List
Under a
phonebook entry:
ADD
VIEW
EDIT
DELETE
DELETE ALL
PB STATUS
DELETE HS
FLASH TIME
CHANGE PIN
ECO MODE
HS SETTINGS REGISTRATION DEFAULT ANS. SYSTEM (For ES1320/
ES1320-2 only)
ALARM
RING SETUP
TONE SETUP
RENAME HS
HS DISPLAY
AUTO ANSWER
DATE & TIME
PIN? PIN? MSG PLAYBACK
DELETE ALL
MEMO
ANSWERING SYSTEM ON/OFF
ANSWERING SYSTEM
SETTINGS
• ANSWER MODE
• OGM SETTINGS
• ANSWER DELAY
• RECORD TIME
• REMOTE ACC.
• BS SCREENING
• CHANGE PIN
p
q
p
q
p
q
p
q
p
q
p
q
p
q
13
GET TO KNOW YOUR PHONE
3.5 Text and Digit Entry Table
The following table shows you where each letter and punctuation character can be
found. This will be helpful when storing a name in the phonebook and renaming your
handset.
In editing mode, a cursor is displayed to indicate the current text entry position. It is
positioned at the right of the last character entered.
NOTES
Once a character is selected, the cursor will move to the next position after a short
pause.
You can move the cursor within the text by pressing
p
q
to amend the text entry.
Press to delete the last character.
Press and hold to delete the entire text string.
3.5.1 English Character Set
Key Alphanumeric Editing
(For phonebook name editing and renaming
handset)
Number Editing
(For phone
number editing,
date / time
editing)
Key
press
1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th
1 space - 1 1
2 A B C 2 2
3 D E F 3 3
4 G H I 4 4
5 J K L 5 5
6 M N O 6 6
7 P Q R S 7 7
8 T U V 8 8
9 W X Y Z 9 9
0 0 0, P (Pause)
* * ? / \ ( ) *
# # ‘ , - . & #
1.
2.
3.
4.
14
4. USE YOUR PHONE
4.1 Make a Call
4.1.1 Preparatory Dialling
Enter the phone number and press or to dial the number. Press to clear the
entry.
4.1.2 Direct Dialing
Press or to access dial tone then enter the phone number.
4.1.3 Call from the Phonebook
Press to access the phonebook then press
p
q
to select the desired phonebook
entry. Press or to dial out to the selected phonebook entry. Alternatively, press
then
p
q
to access the phonebook to get the desired phonebook entry.
4.1.4 Call from the Call List
Press p to access the Call List then press
p
q
to select the desired Call List entry.
Press or to dial out to the selected Call List entry. Alternatively, press then
p
q
to access the Call List from the main menu.
4.1.5 Call from the Redial List
Press q to access the redial list then press
p
q
to select the desired redial number.
Press or to dial out to the selected redial number.
4.1.6 Call Timer
Your handset automatically times the duration of every call. The call timer will display for
a few seconds after the call has ended. It is shown in hours, minutes and seconds format
(HH:MM:SS).
4.2 Answer a Call
If the handset is not on the charging cradle:
When the phone rings, press or to answer a call.
If the handset is on the charging cradle or the base and if AUTO ANSWER is set to ON:
When the phone rings, pick up the handset to answer a call.
15
USE YOUR PHONE
4.3 End a Call
During a call connection, press to end the call.
OR
Put the handset on the base to end the call.
4.4 Adjust Earpiece and Handsfree Volume
There are 5 volume levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece
and handsfree volume.
During a call:
Press
p
q
to select volume 1-5. The current setting is shown on screen. When you
end the call, the setting will remain at the last selected level.
4.5 Mute a Call
You can talk to someone nearby without letting the caller hear you.
During a call:
Press to mute the microphone and MUTED will display on the screen. Your caller
cannot hear you. Press again to unmute the microphone.
4.6 Turn the Ringer On/Off
In idle mode, press and hold to turn off the handset ringer. The icon is displayed
on the screen.
In silent mode, press and hold to turn on the handset ringer. The icon will
disappear.
4.7 Turn the Keypad Lock On/Off
In idle mode, press and hold to turn on the keypad lock. The icon is displayed on
the LCD.
In keypad lock mode, press and hold to turn off the keypad lock. The icon will
disappear.
4.8 Redial the Last Number
You can redial up to 5 of the last numbers called. If you have stored a name in the
phonebook to go with the number, the name will be displayed instead. The most recent
last number will display at the top of the redial list.
16
4.8.1 Redial a Number from the Redial List
In idle mode, press q to access the redial list.
Remark: If redial entry is shown with a name, press to view the number.
Press
p
q
to browse the redial list.
Press or to dial to the selected redial number.
NOTE
If there are no numbers in the redial list, the display shows “EMPTY”.
4.8.2 Store a Redial Number into the Phonebook
In idle mode, press q to access the redial list.
Remark: If redial entry is shown with a name, press to view the number.
Press
p
q
to browse the redial list.
Press then
p
q
to select ADD TO PB.
Press to enter the name.
Press to store the redial number into the phonebook.
Press to select phonebook melody.
Press
p
q
to browse the melody list. The chosen melody will be played when
browsing the melody list.
Press to conrm.
4.8.3 Delete a Redial Number
In idle mode, press q to access the redial list.
Remark: If redial entry is shown with a name, press to view the number.
Press
p
q
to browse the redial list.
Press then
p
q
to select DELETE.
Press to conrm.
4.8.4 Delete the Entire Redial List
In idle mode, press q to access the redial list.
Press then
p
q
to select DELETE ALL.
Press to conrm.
Press to conrm again.
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
1.
2.
3.
4.
17
USE YOUR PHONE
4.9 Find the Handset
You can locate the handset by pressing on the base. All the handsets registered
to the base will produce the paging tone and “PAGING” is ashing on the screen. You
can stop the paging by pressing / / on any handset or on the base again.
NOTE
If there is an incoming call during paging, paging will cease and the phone will ring with
the incoming call instead.
4.10 Make an Internal Call
This feature is only applicable when there are at least two registered handsets. It
allows you to make internal calls, transfer external calls from one handset to another
handset and make conference calls. If the called handset is not answered within 60
seconds, the called handset will stop ringing and the calling handset will return to
standby mode.
NOTE:
If only one handset is registered to the base station, press will display “NOT
POSSIBLE”.
4.10.1 Call Another Handset
In idle mode, press and the available handsets will display except the calling
handset.
Enter the desired handset number with which to connect via intercom.
When the called handset rings, press or on the called handset to establish
the internal call.
NOTE
If there are only two handsets are registered to the base station, press on one
handset will connect to the other handset immediately.
4.10.2 Call All Handsets
In idle mode, press and all registered handsets will display.
Press to ring to all registered handsets.
The rst handset to answer will intercom with the calling handset.
1.
2.
3.
1.
2.
3.
18
4.10.3 Transfer an External Call to Another Handset
During an external call:
Press then
p
q
to select INTERCOM.
Press to select the second handset with which to connect via intercom. If you
have more than 2 handsets, the available handset numbers will be displayed on the
screen. To intercom a specic handset, press the handset number on the keypad. If
you press on the keypad all handsets will ring.
The external call is put on hold automatically and the called handset rings.
Press on the called handset to establish an internal call.
Press on the calling handset or put the calling handset on the charging cradle to
end the current call with the external party on that handset.
The external call is transferred to the called handset.
4.10.4 Make a 3-way Conference Call
The conference call feature allows one external call to be shared over two handsets
using intercom mode. The three parties can share the conversation and no network
subscription is required.
During an external call:
Press then
p
q
to select INTERCOM.
Press to select the second handset with which to connect via intercom. If you
have more than 2 handsets, the available handset numbers will be displayed on the
screen. To intercom a specic handset, press the handset number on the keypad. If
you press on the keypad all handsets will ring.
The external call is put on hold automatically and the called handset rings.
Press on the called handset to establish an internal call.
Press and hold on the calling handset to establish the conference call.
Any handset that hangs up during a conference call will leave the other handset still
connected to the external call.
4.11 Flashing Message Indicator
The phone is designed to provide visual indication when a new message is left from
your local telephone service provider. When a new message is left, the icon will be
displayed on the handset. After you have listened to your message(s), the icon will
disappear.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
19
USE YOUR PHONE
4.12 Call Waiting
Call Waiting tells you if a new caller is trying to contact you when you are already on
the phone. A network tone alerts you to the new caller, so you can answer your second
incoming call by putting the rst caller on hold.
Press . Your rst caller is put on hold and you can talk to your second caller.
To revert back to the original caller, press again.
NOTE
Access to Call Waiting requires a subscription to your network operator. Please contact
your service provider for further details on accessing Call Waiting.
1.
2.
20
5. PHONEBOOK
Your phone can store up to 50 phonebook entries with names and numbers. Each
phonebook entry can have a maximum of 20 digits for the phone number and 12
characters for the name. You can also select different ringtones for your phonebook
entries. Phonebook entries are stored alphabetically by name.
5.1 Add a New Phonebook Entry
In idle:
Press to access the phonebook.
OR
Press and
p
q
to select PHONEBOOK main menu item and then press
to access the phonebook.
Press to select ADD.
Press to enter the name.
Press to enter the number.
Press then
p
q
to select the desired ringtone for your phonebook entry.
Press to store the phonebook entry.
5.2 Search a Phonebook Entry
In idle:
Press to access the phonebook.
Enter the rst character of the name by multi-tap.
5.3 View a Phonebook Entry
In idle:
Press to access the phonebook.
Press
p
q
to select the desired phonebook entry.
Press then
p
q
to select VIEW.
Press then
p
q
to review the name, number and melody of the selected
phonebook entry.
NOTE
If a number is more than 12 digits, press or to review the remaining digits.
5.3 Dial a Phonebook Entry
While in the phonebook list, press
p
q
to select the entry you want, or search
alphabetically using the alphanumeric keypad (see To search alphabetically on page 21).
Press or to dial out.
1.
2.
3.
4.
5.
6.
1.
2.
1.
2.
3.
4.
1.
21
PHONEBOOK
5.3.1 To Search Alphabetically
Press the relevant keypad button, e. g. for the entries beginning with T press 8 once
then press
p
q
to scroll through the entries.
5.4 Edit a Phonebook Entry
In idle:
Press to access the phonebook.
Press
p
q
to select the desired phonebook entry.
Press then
p
q
to select EDIT.
Press then the current contents of the selected phonebook entry will display.
Edit the name (if applicable) then press .
Edit the number (if applicable) then press .
Press
p
q
to select the ringtone (if applicable) then press to conrm.
5.5 Delete a Phonebook Entry
In idle:
Press to access the phonebook.
Press
p
q
to select the desired phonebook entry.
Press then
p
q
to select DELETE.
Press to conrm.
5.6 Delete the Entire Phonebook
Press to access the phonebook.
Press then
p
q
to select DELETE ALL.
Press to conrm.
Press to re-conrm.
5.7 Check the Phonebook Usage
You can check how many phonebook entries have been stored in your phone and how
many more phonebook entries can be stored.
Press to access the phonebook.
Press then
p
q
to select PB STATUS.
Press to conrm.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
22
6. CALLER DISPLAY
(NETWORK DEPENDENT)
If you have subscribed to Calling Number Display service, and provided the caller’s
number is not blocked, the number (or name if stored in the phonebook) will be
displayed when the phone is ringing. With some incoming calls, if the telephone
number is not available, the handset may display one of the following explanations:
UNAVAILABLE The number is not available.
PRIVATE The caller has withheld their number.
PAYPHONE The caller is ringing from a payphone.
MOBILE The incoming call is from a mobile telephone within Australia.
6.1 View the Call List
All received calls are saved in the Call List with the latest call placed at the top of
the list. When the call list is full, the oldest call will be replaced by a new call. An
unanswered call which has not been read is marked with a at the centre of the
bottom line of the display.
Press p to access the call list.
OR
Press then
p
q
to select CALL LIST. Then press .
Press
p
q
to select the desired entry.
Press to view the caller’s number if applicable.
6.2 Store a Call List Number into the Phonebook
Press p to access the call list.
OR
Press then
p
q
to select CALL LIST. Then press .
Press
p
q
to select the desired entry.
Press and
p
q
to select ADD TO PB.
Press to enter the name.
Press and the selected call list number is displayed.
Edit the number if necessary.
Press then
p
q
to select the melody.
Press to conrm.
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.
8.
23
CALLER DISPLAY (NETWORK DEPENDENT)
6.3 Delete an Entry in the Call List
Press p to access the call list.
OR
Press then
p
q
to select CALL LIST. Then press .
Press and
p
q
to select DELETE.
Press to conrm.
6.4 Delete the Entire Call List
Press p to access the call list.
OR
Press then
p
q
to select CALL LIST. Then press .
Press then
p
q
to select DELETE ALL.
Press to conrm.
Press to re-conrm.
6.5 View the Details of the Call List Entry
Press p to access the call list.
OR
Press then
p
q
to select CALL LIST. Then press .
Press
p
q
to select the desired entry.
Press then
p
q
to select DETAILS.
Press to display the date and time of the selected call list entry.
Press to return to the previous screen.
1.
2.
3.
1.
2.
3.
4.
1.
2.
3.
4.
5.
24
7. PHONE SETTINGS
Your phone comes with a selection of settings that you can change to personalize your
phone the way you like it to work.
7.1 Date and Time Settings
You will need to set the correct date and time so that you know when Answering System
messages were received. If you have Calling Number Display, the date / time will be set
automatically after an incoming call.
7.1.1 Change the Date Format
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select DATE & TIME.
Press then
p
q
to select DATE FORMAT. Press .
Press
p
q
to select your desired date format (DD-MM-YY or MM-DD-YY).
Press to conrm.
7.1.2 Change the Time Format
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select DATE & TIME.
Press then
p
q
to select TIME FORMAT. Press .
Press
p
q
to select your desired time format (12 HR or 24 HR).
Press to conrm.
7.1.3 Set the Time
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select DATE & TIME.
Press then
p
q
to select SET TIME.
Press to enter the time information.
Press to conrm.
NOTE
If time has been set before, the current time will display, otherwise, “HH:MM” will
display. When 12 HR mode is the selected format, the time will display in 12 HR format
but must be entered as 24 HR time when programming, e.g. for 01:25 PM enter 13:25.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
25
PHONE SETTINGS
7.1.4 Set the Date
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select DATE & TIME.
Press then
p
q
to select SET DATE.
Press to enter the date information.
Press to conrm.
NOTE
If date has been set before, the current date will display.
7.2 Alarm Settings
You can use this phone to set an alarm clock. When an alarm is set, the displays on
the screen. When the alarm time is reached, the and “ALARM ON” will ash on the
screen ringing with the alarm melody for a duration of 45 seconds.
You can press any key to disable the alarm. If snooze function is activated, the alarm
will sound again at the end of the snooze period of seven minutes. You can also press
and hold to terminate the snooze function.
NOTES
The alarm will turn off when the alarm time is reached or by pressing any key while
the alarm is sounding (even if the handset keypad is locked).
The alarm volume level is the same as the settings of the handset ringer volume. If
the handset ringer is set to VOLUME OFF, the alarm will sound at VOLUME 1 level.
During an external call or internal call, if an alarm is set and when the alarm time
is reached, the and “ALARM ON” will still ash on screen. An alarm tone will
be emitted from the earpiece to notify user the alarm time is reached. Once user
presses any key to disable the alarm, it will revert to the call duration screen.
During paging or ringing, the alarm will not sound when the alarm time is reached.
However if snooze function is enabled, the alarm will sound again at the end of
the snooze period provided that it’s not ringing or in paging mode at the end of the
snooze period.
7.2.1 Turn On/Off the Alarm
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select ALARM.
Press then
p
q
to select ON/OFF.
Press to conrm.
NOTE
If ON is selected, you will be asked to set the alarm time in accordance with the section
below.
1.
2.
3.
4.
5.
a.
b.
c.
d.
1.
2.
3.
4.
26
7.2.2 Set the Alarm Time (If the Alarm is Set to be ON)
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select ALARM.
Press then
p
q
to select ON/OFF.
Press to conrm.
Enter the alarm time.
Press to set the snooze function.
Press then
p
q
to select ON or OFF.
Press to conrm.
7.3 Handset Settings
7.3.1 Set the Ringer Melody for Internal Calls
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select RING SETUP.
Press then
p
q
to select INT RING.
Press then
p
q
to select the desired ringer melody (10 melodies are available
for internal calls).
Press to conrm.
NOTE
Ringer melodies will be played when the melody is highlighted while browsing the
melody list.
7.3.2 Set the Ringer Melody for External Calls
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select RING SETUP.
Press then
p
q
to select EXT RING.
Press then
p
q
to select the desired ringer melody (10 melodies are available
for external calls).
Press to conrm.
NOTE
The respective ringer melody will be played while browsing the melody list.
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
27
PHONE SETTINGS
7.3.3 Set the Ringer Volume
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select RING SETUP.
Press then
p
q
to select RING VOLUME.
Press then
p
q
to select the desired ringer volume (6 ringer volume levels
including VOLUME OFF are available) . If VOLUME OFF is selected, will
display.
Press to conrm.
NOTE
Ringtone will be played at the highlighted ringer volume while browsing the volume list.
7.3.4 Set Alert Tones
A single beep is emitted when you press a key. You can turn on or off the key tone.
You can also turn on the alert tones when low battery and out of range are detected.
Low battery tone will also be emitted while you are talking with the phone to alert you
that you need to charge up your batteries.
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select TONE SETUP.
Press then
p
q
to select KEY TONE/BATTERY TONE/ OUT OF RANGE.
Press then
p
q
to turn on or off these tones.
Press to conrm.
7.3.5 Rename the Handset
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select RENAME HS.
Press then enter the name of your handset.
Press to conrm.
7.3.6 Choose the Information to be Displayed in Idle
You can choose to display time or handset name on the idle screen.
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select HS DISPLAY.
Press then
p
q
to select HANDSET NAME or TIME.
Press to conrm.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
1.
2.
3.
4.
1.
2.
3.
4.
28
7.3.7 Set the Auto Answer
If you turn on the Auto Answer, you can pick up the call from the cradle without pressing
any key.
Press then
p
q
to select HS SETTINGS.
Press then
p
q
to select AUTO ANSWER.
Press then
p
q
to turn on or off the auto answer feature.
Press to conrm.
7.4 Base Settings
The current settings are marked with an asterisk in the relevant menu, which is displayed
at the right-hand side of the menu item.
7.4.1 Set the Base Ringer Melody (For ES1320/1320-2 only)
Press then
p
q
to select BS SETTINGS.
Press then
p
q
to select BS RINGER.
Press then
p
q
to select the desired ringer melody (5 ringer melodies are
available for the base ringer).
Press to conrm.
NOTE
Ringer melodies will be played when the melody is highlighted while browsing the
melody list.
7.4.2 Set the Ringer Volume (For ES1320/1320-2 only)
Press then
p
q
to select BS SETTINGS.
Press then
p
q
to select RING VOLUME.
Press then
p
q
to select the desired ringer volume (6 ringer volume levels
including VOLUME OFF are available).
Press to conrm.
NOTE
Ringtones will be played at the highlighted ringer volume while browsing the volume list.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
29
PHONE SETTINGS
7.4.3 De-register a Handset
You are requested to enter the 4-digit PIN in order to de-register a handset from the
base. The icon on the de-registered handset will blink.
NOTE
You cannot de-register the handset that you are currently using.
Press then
p
q
to select BS SETTINGS.
Press then
p
q
to select DELETE HS.
Press then
p
q
.
Enter the 4-digit system PIN.
Press . The screen displays a list of all registered handsets.
Press
p
q
to select the handset you want to de-register from the base.
Press to conrm.
7.4.4 Change the Recall (Flash) Time
The default setting of Recall Time is 100ms (Short). It is unlikely that you should need
to change this setting unless advised to do so.
In idle mode, press then
p
q
to select BS SETTINGS.
Press then
p
q
to select FLASH TIME.
Press then
p
q
to select your desired ash time (SHORT, MEDIUM, LONG).
Press to conrm.
NOTES
Medium Recall Time = 300ms.
Long Recall Time = 600ms.
7.4.5 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base station.
It is used to protect your phone against unauthorized use. The default system PIN code
is 0000.
Press then
p
q
to select BS SETTINGS.
Press then
p
q
to select CHANGE PIN.
Press then enter the old system PIN.
Press then enter the new system PIN.
Press then enter the new system PIN again.
Press to conrm.
NOTE
If the new PIN entered in Step 5 is not matched with the new system PIN entered in
Step 4, user will be prompted to enter the valid system PIN again in Step 4.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
1.
2.
1.
2.
3.
4.
5.
6.
30
7.4.6 ECO Mode Setting
Press and
p
q
to select BS SETTINGS.
Press and
p
q
to select ECO MODE.
Press and
p
q
to select ON or OFF.
Press to conrm.
7.5 Registration
Your handset and the base station are pre-registered. If for some reason, the handset
is not registered to the base ( ashes even when the handset is near the base
station), register your handset according to the following procedure.
Press and hold on the base station for about ve seconds, the base station is
entered into registration mode.
Press then
p
q
to select REGISTRATION.
Press then enter the 4-digit system PIN.
Press to conrm.
If the handset registration is successful, the icon will stop ashing. The handset will
automatically be allocated the next available handset number. This handset number is
shown in the handset screen in idle mode. If the handset registration is unsuccessful,
the icon will still ash.
7.6 Reset Your Phone
You can reset your phone to the default settings. After reset, all your personal settings
and call list entries will be deleted, but your phonebook remains unchanged.
Press then
p
q
to select DEFAULT.
Press then enter the 4-digit system PIN.
Press to conrm.
Press to re-conrm.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
31
ANSWERING SYSTEM
8. ANSWERING SYSTEM
(FOR ES1320/1320-2 ONLY)
The ES1320,ES1320-2 includes a telephone answering system that records
unanswered calls when it is switched on. The screen message counter (two digits)
seven segment display on the base will show the number of the messages when the
answering system is on. The answering system can store up to 59 messages within the
maximum recording time of approximately 15 minutes. As well as recording incoming
messages, you can record memos for other users of your phone.
If the answering system memory is full, the handset will display TAM FULL and the handset
name alternatively in standby, or display TAM FULL and the date / time information in
standby which depends on which option has been selected in the handset setup.
NOTE
Your answering system is designed to answer calls after 14 rings when it is switched
off. This is to enable you to operate the remote access functions of your answering
system in the event your answering system is switched off.
8.1 Turn On/Off the Answering System
You can turn the answering system on or off through the base or handset. When the
answering system is set to ON, calls will be answered after the set answer delay and
the caller can then leave you a message. When the answering system is set to OFF,
calls will be answered after 14 rings and the answer only message will be played to
your callers. They will not be able to leave you a message.
8.1.1 Through the Base:
Press on the base.
If answering system is set to ON, displays on the handset LCD and the
7- segment LED on the base will display the number of incoming messages.
If answering system is set to OFF, will disappear from the handset screen
and the 7-segment LED on the base will display --.
8.1.2 Through the Handset:
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select TAM ON/OFF.
Press then
p
q
to select ON or OFF.
Press to conrm.
If answering system is set to ON, displays on the handset screen and the
7- segment LED on the base will display the number of incoming messages.
If answering system is set to OFF, will disappear from the handset screen
and the 7- segment LED on the base will display --.
1.
•
•
1.
2.
3.
4.
•
•
32
8.2 Listen to the Messages in the Answering System
When new messages are recorded on the answering system, ashes on the
handset display and the message counter on the base ashes with the number of
new messages in the answering system until all the new messages are played. Old
messages will be played after all new messages are played completely. The message
counter LED stays steady to indicate the number of old messages stored in the
answering system.
8.2.1 Listen to New Messages through the Base
Press on the base.
The new messages are played from the loudspeaker on the base in the sequence
they are recorded.
Press + or - to increase or decrease the volume during message playback
respectively.
8.2.2 Listen to New Messages through the Handset
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select MSG PLAYBACK.
Press to start message playback and the screen displays the date and time
information of the message received.
During message playback, press
p
q
to increase or decrease the message
playback volume respectively.
Press to select STOP, FORWARD, PREVIOUS, DELETE to perform these
functions during message playback.
STOP: Stop the current message playback and return to the previous menu.
FORWARD: Skip to play the next message. The date and time information of the
next message will display if there is a next message.
PREVIOUS: Skip to repeat playing the current message from the beginning. The
date and time information of the current message will display.
DELETE: Delete the current message and the next message will be played.
Press to conrm.
NOTES
is placed at the centre of the bottom of the LCD to indicate that it is a new
message. If this message has been read or listened, the will disappear and will
be reected next time when you listen to this message again.
If there are no new messages, 00--00 12--00A is displayed briey and you will be
automatically returned to the previous menu.
After new message is played, the new message will be saved as an old message
automatically unless it is deleted.
1.
2.
3.
1.
2.
3.
4.
5.
6.
1.
2.
3.
33
ANSWERING SYSTEM
Alternatively, you can use the following shortcut keys to control different operation
during message playback.
Press to stop message playback.
Press to skip to repeat playing the current message from the beginning.
Press twice to skip backward to the previous message.
Press to skip to play the next message.
Press to delete the current message playback.
8.3 Delete All Messages in the Answering System
8.3.1 Delete All Messages through the Base:
In idle:
Press and hold X on the base.
All the old messages will be deleted.
NOTE
New messages will not be deleted. If there are no more messages in the answering
system, 00 will display on the base.
8.3.2 Delete All Messages through the Handset:
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select DELETE ALL.
Press to conrm.
Press to delete all old messages.
NOTE
If there are no more messages in the answering system, EMPTY will display and return
to previous menu.
8.4 Record Memo
You can record your memo message for another user. When you record a memo, the
message counter will increase by one and the message can be played back in the
same way as answering system messages. Memo recording can still function even
when the answering system is turned off.
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select MEMO.
Press to start memo recording and RECORDING is displayed.
Press to stop memo recording and save the memo. The memo is played back.
OR
Press to stop memo recording without saving and return to previous menu.
1.
2.
1.
2.
3.
4.
1.
2.
3.
4.
34
8.5 Answering System Settings
You can use the TAM SETTINGS menu through the handset to change the settings of
your answering system.
8.5.1 Set the Answer Mode:
By default, the answering system is set in ANS & REC mode which allows callers to
leave a message. This mode can be changed to ANSWER ONLY which does not allow
callers to leave a message. In that case, your callers will be prompted to call back later.
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select TAM SETTINGS.
Press then
p
q
to select ANSWER MODE.
Press then
p
q
to select ANS & REC or ANSWER ONLY.
Press to conrm.
8.6 Record Your Own Outgoing Message (OGM)
You can record your own OGM for ANS & REC mode or ANSWER ONLY mode.
When you record your own OGM, it will be used when the answering system answers
the call. If your personalised OGM is deleted, the pre-set OGM will be restored
automatically.
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select TAM SETTINGS.
Press then
p
q
to select OGM SETTINGS.
Press then
p
q
to select ANS & REC or ANSWER ONLY.
Press then
p
q
to select RECORD MESS.
Press to start recording your personalised OGM and RECORDING is displayed
on the screen.
Press to stop and save your personalised OGM. Your newly saved OGM will
playback automatically. Alternatively, press to return to previous screen without
saving the personalised OGM.
NOTE
If pre-set OGM is playing, you are not able to delete the pre-set OGM and thus OK will
not display. Only C will display.
8.7 Playback and Delete the Outgoing Message (OGM)
You can playback your own personalised OGM or the pre-set OGM for ANS & REC
mode or ANSWER ONLY mode and choose to delete your personalised OGM during
playback and record a new one whenever you want. Please note the pre-set OGM
cannot be deleted.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
35
ANSWERING SYSTEM
8.7.1 Playback the OGM
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select TAM SETTINGS.
Press then
p
q
to select OGM SETTINGS.
Press then
p
q
to select ANS & REC or ANSWER ONLY.
Press then
p
q
to select PLAYBACK.
Press to playback your personalised OGM (if you have recorded a
personalised OGM before) and PLAYING OGM will be displayed on the screen.
Press to stop the OGM playback and return to the previous menu.
NOTE
If a personalised OGM is not recorded, the preset OGM will be played.
8.8 Delete the Personalised OGM
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select TAM SETTINGS.
Press then
p
q
to select OGM SETTINGS.
Press then
p
q
to select ANS & REC or ANSWER ONLY.
Press then
p
q
to select PLAYBACK.
Press to playback your personalised OGM (if you have recorded a
personalised OGM before) and PLAYING OGM will be displayed on the screen.
Press to delete your personalised OGM and return to previous menu and the
pre-set OGM will be restored automatically.
NOTE
If pre-set OGM is playing, you are not able to delete the pre-set OGM and thus OK will
not display. Only C will display.
8.9 Set the Answer Delay
You can set the number of rings before the answering system answers and starts
playing your OGM. You can set the answering system to answer after two to eight rings
or TIME SAVER.
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select TAM SETTINGS.
Press then
p
q
to select ANSWER DELAY (Available options: 2 RINGS,
4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER).
Press then
p
q
to select your desired answer delay.
Press to conrm.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
36
8.10 Set the Recording Time of Incoming Message
You can set the maximum length of the recording time of the incoming messages.
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select TAM SETTINGS.
Press then
p
q
to select RECORD TIME (Available options: 60, 120, 180
seconds or UNLIMITED).
Press then
p
q
to select your desired recording time.
Press to conrm.
8.11 Activate Remote Access
Your phone lets you check your messages, or otherwise operate your answering
system, remotely. You can do this by calling the answering system when you are away
from home and entering a 4-digit remote access PIN on a tone-dialling phone.
Use the 4-digit remote access PIN code to prevent unauthorised access to your
answering system.
8.11.1 Change the 4-digit Remote Access PIN
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select TAM SETTINGS.
Press then
p
q
to select CHANGE PIN.
Press to enter the old PIN. (Default Remote Access PIN is 0000).
Press to enter the New PIN.
Press to enter the New PIN again.
Press to reconrm.
NOTE
If the new PIN entered in Step 6 is not matched with the new system PIN entered in
Step 5, user is requested to enter the valid system PIN again in Step 5.
8.11.2 Activate or Deactivate the Remote Access
Press then
p
q
to select ANS. MACHINE.
Press then
p
q
to select TAM SETTINGS.
Press then
p
q
to select REMOTE ACC.
Press then
p
q
to select ON or OFF to turn the remote access on or off
respectively.
Press to conrm.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
37
ANSWERING SYSTEM
8.11.3 Access Your Answering System Remotely
You can ring your phone from another tone-dialling phone to switch the answering
system on or off then listen to your messages remotely.
Place a call from a tone-dialling phone to your phone.
When the answering system answers the calls and starts playing the OGM,
press .
NOTE
You must enter while the OGM is still playing, in order to access the answering
system remotely.
Enter the 4-digit Remote Access PIN.
NOTE
If the 4-digit Remote Access PIN is entered incorrectly three times consecutively, the
call will be terminated automatically.
Press the appropriate keys from the table on the next page to carry out your
desired function.
NOTE
If your Answering System is switched off, it will answer after 14 rings and play the
ANSWER ONLY OGM. Press , then enter the 4-digit remote access PIN (Default
Remote Access PIN is 0000 to activate the remote access feature.)
When your answering system memory is full and the answer mode is in ANS & REC,
the answer mode will change to ANSWER ONLY automatically. It will change to
ANS & REC mode automatically after some messages have been deleted.
1.
2.
3.
4.
38
8.11.4 Remote Commands
When the answering system is set to ON and when there is an incoming message, the
base will start call screening automatically after the preset numbers of rings of answer
delay.
Keys Functions
While message is NOT playing While message is playing
2 - Delete the current message
playback
4 - Skip to repeat playing the current
message from the beginning.
Press twice to skip backward to the
previous message.
5 Play the message Stop the current message playback
6 - Skip to play the next message
7 Turn on the answering system -
8 - Stop the current message playback
9 Turn off the answering system -
* Enter the 4-digit remote access PIN -
At any time if you want to pick up the call, you can press on the handset and the
message recording will be stopped automatically. If the answering system is in the
process of recording, the message already stored will be saved.
39
DEFAULT SETTINGS
9. DEFAULT SETTINGS
ITEMS Default Values
Default Settings of Handset
LANGUAGE ENGLISH
EXT RING MELODY 1
INT RING MELODY 2
INT RING VOLUME VOLUME 5
EXT RING VOLUME VOLUME 5
EARPIECE VOLUME VOLUME 4
SPEAKER VOLUME VOLUME 4
HANDSET NAME HANDSET 1 / HANDSET 2
KEY TONE ON
LOW BATTERY BEEP ON
OUT OF RANGE BEEP OFF
AUTO ANSWER ON
DATE FORMAT DD--MM--YYYY
TIME FORMAT 24 HR
SET DATE 01--01--2013
SET TIME 00--00
ALARM OFF
TAM ON/OFF (ES1320 only) ON
ANSWER MODE (ES1320 only) ANS. & REC.
ANSWER DELAY (ES1320 only) 6 RINGS
RECORD TIME (ES1320 only) 180 S
REMOTE ACC. (ES1320 only) ON
Default Settings of Base
BS RINGER (ES1320 only) MELODY 2
RING VOLUME (ES1320 only) VOLUME 3
DIAL MODE TONE
ECO MODE ON
40
10. TROUBLESHOOTING
If you have difculty with your phone, please try the suggestion listed below.
Problem Solutions
My telephone does
not work at all.
Make sure the batteries are installed and charged
correctly. For optimum daily performance, return the
handset to the telephone base after use.
Make sure the power adapter is securely plugged into
an outlet not controlled by a wall switch.
Make sure the telephone line cord is plugged rmly
into the telephone base and the telephone wall jack.
Unplug the electrical power to the telephone base.
Wait for approximately 15 seconds, then plug it
back in. Allow up to one minute for the handset and
telephone base to synchronize.
Remove and re-insert the batteries. If that still does not
work, it might be necessary to purchase new batteries.
Disconnect the telephone base from the telephone
wall jack and plug in a working telephone. If the other
telephone does not work, the problem is probably in
the wiring or the telephone service. Call your telephone
service provider.
•
•
•
•
•
•
Low battery shows on
screen.
Place the handset in the telephone base for
recharging.
Remove and re-install the batteries and use it until fully
depleted, then recharge the handset in the telephone
base.
If the above measures do not solve the problem,
replace the batteries.
•
•
•
The batteries do not
charge in the handset
or the handset
batteries do not
accept charge.
Make sure the handset is placed in the telephone base
correctly.
Remove and reinstall the batteries, then charge for up
to 16 hours.
Purchase new batteries.
•
•
•
41
TROUBLE SHOOTING
There is interference
during a telephone
conversation. My
calls fade out when I
am using the handset.
The handset may be out of range. Move it closer to the
telephone base.
If you subscribe to high-speed Internet service (digital
subscriber line - DSL) through your telephone line, you
must install a DSL lter between the telephone base
and the telephone wall jack. The lter prevents noise
and caller ID problems caused by DSL interference.
Please contact your DSL service provider for more
information about DSL lters.
Appliances or other cordless telephones plugged into
the same circuit as the telephone base can cause
interference. Try moving the appliance or telephone
base to another outlet.
Other electronic products may cause interference to
your cordless telephone. Install your telephone as far
away as possible from the following electronic devices:
wireless routers, radios, radio towers, pager towers,
cellular telephones, digital telephones, intercoms,
room monitors, televisions, VCRs, personal computers,
kitchen appliances, and other cordless telephones.
If your telephone is plugged in with a modem or a
surge protector, plug the telephone (or modem/surge
protector) into a different location. If this doesn’t solve
the problem, re-locate your telephone or modem
farther apart from each other, or use a different surge
protector.
The location of your telephone base can impact
the performance of your cordless phone. For better
reception, install the telephone base in a centralized
location within your home or ofce, away from walls or
other obstructions. In many environments, elevating
the telephone base improves overall performance.
Disconnect the telephone base from the telephone
wall jack and plug in a corded telephone. If calls are
still not clear, the problem is probably in the wiring or
telephone service. Contact your telephone service
provider (charges might apply).
If the other telephones in your home are having
the same problem, the problem is in the wiring or
telephone service. Contact your telephone service
provider (charges may apply).
•
•
•
•
•
•
•
•
42
Common cure for
electronic equipment.
If the telephone is not responding normally, put the
handset in the telephone base. If it does not respond, try
the following (in the order listed):
Disconnect the power to the telephone base.
Disconnect the batteries on the handset.
Wait a few minutes before connecting power to the
telephone base.
Re-install the batteries and place the handset in the
telephone base.
Wait for the handset to synchronize with the telephone
base. Allow up to one minute for this to take place.
•
•
•
•
•
Please contact the technical support of the network provider for further information. This
telephone is not equipped with a grounding function! Therefore some of the functions
may be limited when used in PBX systems.
43
TECHNICAL SPECIFICATIONS
11. TECHNICAL SPECIFICATIONS
BASIC INFORMATION
Dimensions Handset: width / depth / height = 51 X33 X 154 mm
Charger: width / depth / height =102X 52 X 118 mm
Base: width / depth / height = 92X 52 X 108 mm
Weight Handset: 90g
Base: 130g
Valid range Indoor: 50m
Outdoor: 300m
Handset Operating
Time
Standby time: 100Hours approx.
Talk time: 10Hours approx.
RF Parameter
Frequency 1.88GHz to 1.9GHz
Number of Channels 10
Power Supply
Base Input 100-240V 50/60Hz; output 6V 300mA adapter
Charger Input 100-240V 50/60Hz; output 6V 300mA adapter
Handset 2 x NIMH; 1.2V; 500mAH rechargeable batteries
44
Take care of your telephone
Your cordless telephone contains sophisticated electronic parts, so you must treat
it with care.
Avoid rough treatment.
Place the handset down gently.
Save the original packing materials to protect your telephone if you ever need to
ship it.
Avoid water
You can damage your telephone if it gets wet. Do not use the handset in the rain, or
handle it with the wet hands. Do not install the telephone base near a sink, bathtub
or shower.
Electrical storms
Electrical storms can sometimes cause power surges harmful to electronic
equipment. For your own safety, take caution when using electric appliances during
storms.
Cleaning your telephone
Your telephone has a durable plastic casing that should retain its luster for many
year. Clean it only with a soft cloth slightly dampened with water or a mild soap.
Do not use excess water or cleaning solvents of any kind.
NOTE
Remember that electrical appliances can cause serious injury if used when you are wet
or standing in water. If the telephone base should fall into water. DO NOT RETRIEVE
IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS
FROM THE WALL, then pull the unit out by the unplugged cords.
•
•
•
•
•
•
•
•
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
12. CARE AND MAINTENANCE
INSTRUCTIONS
45
TECHNICAL SUPPORT
13. TECHNICAL SUPPORT
Please read out the serial number of this telephone to Technical Center.
The serial number can be found in the battery compartment after having the batteries
removed.
For use in New Zealand please note the following:
The grant of a Telepermit for any item of terminal equipment indicates only that
Telecom has accepted that the item complies with minimum condition for connection to
its network. It indicates no endorsement of the product by Telecom, nor does it provide
any sort of warranty.
Above all, it provides no assurance that any item will work correctly in all respects with
another item of Telepermitted equipment of a different make or model, nor does it imply
that any product is compatible with all of Telecom’s network services.
Under power fail conditions this appliance will not operate. Please ensure that a
separate telephone, not dependent on local power, is available for emergency use.
If the toll services of a service provider other than Telecom are being used then a toll
charge may be incurred if the “0” prex toll access code and area code are used for a
local call.
The Caller ID telephone numbers that are displayed and stored in this equipment
include the caller’s area code but may not include the toll access “0” prex. When
calling back it may be necessary to add a “0” to the telephone number, of if the
telephone number is a local number, omit the area code digit. If the toll services of a
service provider other than Telecom are being used than a toll charge may be incurred
if the “0” prex toll access code and area code are used.
Imported, Distributed and Serviced by
Atlas Gentech (NZ) Limited
76 Carbine Road, Mt Wellington
Auckland, New Zealand.
Private Bag 14927
Panmure, Auckland.
For service
Telephone 09 5742727
Fax 09 5742722
Email service@atlasgentech.co.nz
46
VTECH TELECOMMUNICATIONS LTD.
A member of THE VTECH GROUP OF COMPANIES.
© 2012-2013 VTech Telecommunications Ltd. All Rights Reserved.
Loading...