Vtech CS6120-31, CS6124-31, CS6124, CS6124-2, CS6120-2 User Manual

Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news.

Abridged user’s manual

CS6120-2

CS6120-31

CS6124

CS6124-2

CS6124-31

DECT 6.0 cordless telephone

Congratulations

on purchasing your new VTech product. Before using this telephone, please read Important safety instructions.

This abridged user’s manual provides you with basic installation and use instructions. A limited set of features are described in abbreviated form.

Please refer to the online user’s manual for a full set of installation and operation instructions at www.vtechphones.com.

Compatible with

Hearing Aid T-Coil

TIA-1083

Telephones identiﬁed with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of

the Telecommunications Industry Association. Used under license.

The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR® label indicating it meets the latest energy efﬁciency guidelines.

What’s in the box

Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.

1 set for CS6124;

2 sets for CS6120-2/ CS6124-2;

3 sets for CS6120-31/ CS6124-31

1 set for CS6120-2/CS6124-2; 2 sets for CS6120-31/CS6124-31

Abridged

user’s

manual

Important

safety

instructions

Telephone base overview

1 – /REPEAT

• Repeat a message.

• Press twice to play the previous message.

2 – /SKIP

• Skip to the next message.

3 – /FIND HANDSET

• Page all system handsets.

4 – Charging pole

5 – Speakerphone

6 – X/ DELETE

• Delete the playing message.

• Press twice to delete all old messages.

7 – Message window

8 – /PLAY/STOP

• Play messages.

• Stop playing messages.

9 – p/q/VOLUME

• Adjust the listening volume.

• Adjust the telephone base ringer volume.

10 – /ANS ON/OFF

• Turn on or off the answering system.

11 – IN USE light

• Flashes when there is an incoming call, or another telephone sharing the same line is in use.

• On when the telephone is in use, or the answering system is answering a call.

Handset overview

1 – Handset earpiece

2 – LCD display

3 – CID/VOL-

• Review the caller ID log when the telephone is not in use.

• Scroll down while in a menu, or in the directory, caller ID log or redial list.

• Move the cursor to the left when entering numbers or names.

• Decrease the listening volume during a call or message playback.

4 – /FLASH

• Make or answer a call.

• Answer an incoming call when you receive a call

waiting alert.

5 – 1

• Press repeatedly to add or remove 1 in front of the caller ID log entry before dialing or saving it to the directory.

6 – TONE

• Switch to tone dialing temporarily during a call.

7 – MUTE /DELETE

• Mute the microphone during a call.

• Silence the handset ringer temporarily while the

phone is ringing.

• Delete the displayed entry while reviewing the directory, caller ID log or redial list.

• Delete digits or characters when entering numbers or names.

8 – Microphone

9 – Charging pole

10 – MENU/SELECT

• Show the menu.

• While in a menu, press to select an item, or save

an entry or setting.

11 – /VOL+

• Review the directory when the phone is not in use.

• Scroll up while in a menu, or in the directory, caller ID log or redial list.

• Move the cursor to the right when entering numbers or names.

• Increase the listening volume during a call or message playback.

12 – OFF/CANCEL

• Hang up a call.

• Return to the previous menu or idle mode without

making changes.

• Delete digits while predialing.

• Silence the handset ringer temporarily while the

phone is ringing.

• Erase the missed call indicator while the handset is not in use.

13 – 0/OPER

• Enter space character during text editing.

14 – #

• Show other dialing options when reviewing a caller ID log entry.

REDIAL/PAUSE

15 –

• Review the redial list.

• Inser t a dialing pause while dialing or entering

numbers into the directory.

16 – Battery compartment cover

Charger overview

1 – Charging pole

Display icons overview

The battery icon flashes when the battery is low and needs charging.

The battery icon animates when the battery is charging.

The battery icon becomes solid when the battery is fully charged.

There are new messages on the built-in answering system.

There are new voicemail received from your telephone service provider.

NEW

ANS ON

There are new caller ID log entries.

The answering system is turned on.

The message number currently playing.

Connect

You can choose to connect the telephone base for desktop usage or wall mounting.

NOTES

• Use only the adapters provided.

• Make sure the electrical outlets are not controlled by

wall switches.

• The adapters are intended to be correctly oriented in a vertical or ﬂoor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

TIP

• If you subscribe to digital subscriber line (DSL) highspeed Internet service through your telephone line, make sure you install a DSL lter (not included) between the telephone line cord and telephone wall jack. Contact your DSL service provider for more information.

Connect the telephone base

Connect the charger

Mount the telephone base

Install and charge the battery

Install the battery

Install the battery as shown below.

NOTES

• Use only supplied battery.

• Charge the battery provided with this product only

in accordance with the instructions and limitations speciﬁed in this manual.

• If the handset will not be used for a long time, disconnect and remove the battery to prevent possible leakage.

THIS SIDE UP

Charge the battery

Place the handset in the telephone base or the charger to charge.

Once you have installed the battery, the handset LCD display indicates the battery status (see the table below).

NOTES

• For best performance, keep the handset in the telephone base or charger when not in use.

• The battery is fully charged after 16 hours of continuous charging.

• If you place the handset in the telephone base or the charger without plugging in the battery, the screen displays No battery.

Battery

indicators

The screen is blank, or displays Put in charger and

ﬂashes.

The screen displays Low battery and ﬂashes.

The screen displays

HANDSET X.

Battery status Action

The battery has no or very little charge. The handset cannot be used.

The battery has enough charge to be used for a short time.

The battery is charged.

Charge without interruption (at least 30 minutes).

Charge without interruption (about 30 minutes).

To keep the battery charged, place it in the telephone base or charger when not in use.

Before use

After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time.

Set date and time

NOTE

• Make sure you set the date and time including the year correctly; otherwise the answering system does not announce the correct day of the week for your recorded messages time stamp.

1. Use the dialing keys (0-9) to enter the month

(MM), date (DD) and year (YY). Then press SELECT.

2. Use the dialing keys (0 -9) to enter the hour

(HH) and minute (MM). Then press choose AM or PM.

3. Press SELECT to save.

Check for dial tone

Press . If you hear a dial tone, the installation is successful.

If you do not hear a dial tone:

• Make sure the installation procedures

described above are properly done.

• It may be a wiring problem. If you have

changed your telephone service to digital service from a cable company or a VoIP service provider, the telephone line may need to be rewired to allow all existing telephone jacks to work. Contact your cable/VoIP service

provider for more information.

Operating range

This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance - which can vary with the locations of the telephone base and handset, the weather, and the layout of your home or ofﬁce.

When the handset is out of range, the handset displays Out of range or no pwr at base.

If there is a call while the handset is out of range, it may not ring, or if it does ring, the call may not connect well when you press . Move closer to the telephone base, then press to answer the call.

If the handset moves out of range during a telephone conversation, there may be interference. To improve reception, move closer to the telephone base.

q or p

Use the handset menu

1. Press MENU when the phone is not in use.

2. Press or until the screen displays the

desired feature menu.

3. Press SELECT.

• To return to the previous menu, press

CANCEL.

• To return to idle mode, press and hold

CANCEL.

Congure your telephone

Set language

The LCD language is preset to English. You can select English, French or Spanish to be used in all screen displays.

1. Press MENU when the handset is not in use.

2. Scroll to Settings, then press SELECT twice.

3. Scroll to choose English, Français or Español.

4. Press SELECT twice to save your setting.

Set date and time

NOTE

• Make sure you set the date and time including the year correctly; otherwise the answering system does not announce the correct day of the week for your recorded messages time stamp.

1. Press MENU on the handset when not in use.

2. Scroll to Set date/time and then press SELECT.

3. Use the dialing keys (0-9) to enter the month (MM), date (DD) and year (YY). Then press SELECT.

4. Use the dialing keys (0 -9) to enter the hour (HH) and minute (MM). Then press choose AM or PM.

5. Press SELECT.

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to touch-tone dialing temporarily during a call.

1. During a call, press TONE .

2. Use the dialing keys to enter the relevant number. The telephone sends touch-tone signals. It automatically returns to pulse dialing mode after you end the call.

q or p

Telephone operations

Handset control key panel:

CANCEL

Make a call

• Press , and then dial the telephone number.

Answer a call

• Press or any of the dialing keys.

End a call:

• Press OFF or put the handset back in the

telephone base or charger.

Volume

• During a call, press VOL- or VOL+ to adjust

the listening volume.

Mute

The mute function allows you to hear the other party but the other party cannot hear you.

1. During a call, press MUTE. The handset displays Muted.

2. Press MUTE again to resume the conversation. The handset displays

Microphone on brieﬂy.

Join a call in progress (for multiple handset models only)

You can use three handsets at a time on an outside call.

• When a handset is already on a call, press on another handset to join the call.

• To exit the call, press OFF on the handset or place it in the telephone base or charger. The call continues until all handsets hang up.

Call waiting

When you subscribe to call waiting service from your telephone service provider, you hear an alert tone if there is an incoming call while you are already on a call.

• Press FLASH to put the current call on hold and take the new call.

• Press FLASH at any time to switch back and forth between calls.

Find handset

Use this feature to ﬁnd the system handset.

To start paging:

• Press /FIND HANDSET on the telephone base when not in use. All idle handsets ring and display ** Paging **.

To end paging:

• Press /FIND HANDSET at the telephone

base.

-OR-

• Press or any of the dialing keys on the handset.

NOTE

• Do not press and hold /FIND HANDSET for more than four seconds. It may lead to handset deregistration.

Redial list

Each handset stores the last ﬁve telephone numbers dialed. When there are already ﬁve entries, the oldest entry is deleted to make room for the new entry.

Review and dial a redial list entry

1. Press REDIAL when the handset is not in use.

2. Press q, p or REDIAL repeatedly until the desired entry displays.

3. Press to dial.

Delete a redial list entry

• When the desired redial entry displays, press

DELETE.

Category

Storage Messages are

Method to retrieve messages

Built-in

answering system

stored in the telephone base.

Your messages will not be deleted automatically. You have to delete your messages manually.

When you received new messages, the handset displays X X new messages and

, and the message window on the telephone base ﬂashes.

To retrieve messages, usually there are two ways:

• Press on

the telephone base; or

• Access

remotely with an access code.

Voicemail from

telephone

service

Messages are stored in a server or system provided by your telephone service provider.

Your messages may be automatically deleted af ter a period of time.

Contact your telephone service provider for more details.

When you received new messages, the handset displays

and New

voicemail.

To retrieve messages, you need an access number and/ or a passcode provided by your telephone service provider.

Set your built-in answering system

The answering system can record and store up to 99 messages. Each message can be up to three minutes in length. The total storage capacity for the announcement, messages and memos is approximately 14 minutes. The actual recording time depends on individual message characteristics.

Your answering system allows you to set your announcement, to save and delete messages, activate call screening, to set number of rings before pick up, to access remotely, and to control the recording time.

Turn the answering system on or off

The answering system must be turned on to answer and record messages.

To turn on or off with the telephone base:

• Press /ANS ON/OFF to turn the built-in

answering system on or off.

Telephone base control key panel:

To turn on or off with the handset:

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys and then press SELECT.

3. Scroll to Answer on/off and then press SELECT.

4. Press q or p to choose On or Off and then press SELECT.

Default announcement

The telephone is preset with a greeting that answers calls with “Hello, please leave a message after the tone.” You can use this preset announcement, or replace it with your own.

Record your own announcement

The announcement can be up to 90 seconds in length.

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys then press SELECT twice.

3. The handset announces, “To play, press 2. To record, press 7.” Then press 7 to record.

4. The handset announces, “Record after the tone. Press 5 when you are done.” After the tone, speak towards the handset microphone.

5. Press 5 when done.

Play the announcement

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys then press SELECT twice.

3. The handset announces, “To play, press 2. To record, press 7.” Then press 2 to play the current announcement.

Options during playback:

• Press VOL+ or VOL- to adjust the listening volume.

• Press 5 or OFF to stop at any time.

Delete the announcement

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys then press SELECT twice.

3. The handset announces, “To play, press 2. To record, press 7.” Then press 3 to delete your own recorded announcement.

NOTE

• After you deleted your own recorded announcement, the answering system answers calls with the default announcement.

Set number of rings

You can set the answering system to answer an incoming call after two, three, four, ﬁve or six rings; or toll saver. If you choose toll saver, the answering system answers a call after two rings when you have new messages, or after four rings when you have no new messages.

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys and then press SELECT.

3. Scroll to Ans sys setup and then press SELECT.

4. Scroll to # of rings and then press SELECT.

5. Press q or p to choose 6, 5, 4, 3, 2 or Toll

saver and then press SELECT.

Set recording time

You can set the recording time for each incoming message.

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys and then press SELECT.

3. Scroll to Ans sys setup and then press SELECT.

4. Scroll to Recording time and then press SELECT.

5. Press q or p to choose 3 minutes,

2 minutes or 1 minute, and then press SELECT.

Use your built-in answering system

New message indication

When there are new answering system messages, the handset displays XX new messages and , and the message window on the telephone base ﬂashes. When you are reviewing a new message, NEW and display on the handset.

If the message alert tone is turned on, the telephone base beeps every 10 seconds when there are messages that have not been reviewed.

Message playback

To playback messages at the telephone base:

• Press when the phone is not in use.

Options during playback:

• Press /VOLUME or /VOLUME to adjust the listening volume.

• Press /SKIP to skip to the next message.

• Press /REPEAT to repeat the playing

message. Press /REPEAT twice to listen to the previous message.

• Press X/DELETE to delete the playing message. The system advances to the next message.

• Press /STOP to stop.

To playback messages with a handset:

• Press MENU when the phone is not in use, and then press SELECT.

Options during playback:

• Press VOL- or VOL+ to adjust the listening volume.

• Press 6 to skip to the next message.

• Press 4 to repeat the playing message. Press

4 twice to listen to the previous message.

• Press 3 to delete the playing message. The system advances to the next message.

• Press OFF to stop the playback.

Delete all messages

You can only delete old (reviewed) messages. You cannot delete new messages until you review them. You cannot retrieve deleted messages.

To delete all messages with the telephone base:

• Press X/DELETE twice when the phone is not in use.

To delete all messages with a handset:

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys and then press SELECT.

3. Scroll to Delete all old and then press

SELECT twice.

Remote access

A two-digit security code is required to access the answering system remotely from any touch-tone telephone. The preset code is 19. You can use this preset code, or set your own.

1. Dial your telephone number from any touchtone telephone.

2. When the system plays your announcement, enter the two-digit security code.

3. Enter one of the following remote commands.

Command Description

Play all messages.

Play only new messages.

Delete the current message (during playback).

Delete all old messages.

Repeat the current message (during playback).

Stop.

Hear a list of remote commands.

Skip to the next messag e (during playback).

Record a new announcement.

End the call.

Turn the answering system on or off.

4. Hang up or press 8 to end the call.

Remote access code

You can set your own remote access code from 00 to 99.

1. Press MENU when the phone is not in use.

2. Scroll to Answering sys and then press SELECT.

3. Scroll to Ans sys setup and then press SELECT.

4. Scroll to Remote code and then press SELECT.

5. Press the dialing keys (0-9) to enter the code, or q or p to select from 00 to 99, then press

SELECT.

Use the built-in answering system and voicemail service

You can use your answering system and voicemail service together by setting your answering system to answer before voicemail service answers as described below. To learn how to program your voicemail settings, contact your telephone service provider.

If you are on a call, or if the answering system is busy recording a message and you receive another call, the second caller can leave a voicemail message.

Set your answering system to answer calls at least two rings earlier than your voicemail service is set to answer. For example, if your voicemail service answers after six rings, set your answering system to answer after four rings. Some voicemail service providers may program the delay before answering calls in seconds instead of rings. In this case, allow six seconds per ring when determining the appropriate setting.

Retrieve voicemail from telephone service

Voicemail is a feature available from most telephone service providers. It may be included with your telephone service, or may be optional. Fees may apply.

Retrieve voicemail

When you received a voicemail, the handset displays and New voicemail. To retrieve, you typically dial an access number provided by your telephone service provider, and then enter a security code. Contact your telephone service provider for instructions on how to conﬁgure the voicemail settings and listen to messages.

NOTE

• After you have listened to all new voicemail messages, the indicators on the handset turn of f automatically.

Turn off the new voicemail indicators

If you have retrieved your voicemail while away from home, and the handset still displays the new voicemail indicators, use this feature to turn off the indicators.

NOTE

• This feature turns off the indicators only, it does not delete your voicemail messages.

1. Press MENU when the phone is not in use.

2. Scroll to Settings and then press SELECT.

3. Scroll to Clr voicemail and then press SELECT.

4. Press SELECT again to conﬁrm.

When your handset is deregistered from the telephone base, follow the steps below to register it back to the telephone base.

1. Remove the handset from the telephone base.

2. Press and hold /FIND HANDSET at the telephone base for about four seconds until the IN USE light turns on.

3. Then press # on the handset. It displays

Registering...

The handset show Registered and you hear a beep when the registration process completes. The registration process takes about 60 seconds to complete.

General product care

Taking care of your telephone

Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.

Avoid rough treatment

Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.

Avoid water

Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.

Electrical storms

Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electrical appliances during storms.

Cleaning your telephone

Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a dry non-abrasive cloth. Do not use dampened cloth or cleaning solvents of any kind.

Frequently asked questions

Below are the questions most frequently asked about the cordless telephone. If you cannot ﬁnd the answer to your question, visit our website at www.vtechphones.com or call 1 (800) 595-9511 for customer service.

My telephone does not work at all.

The display shows No line. I cannot hear the dial tone.

Make sure the telephone base is installed properly, and battery is installed and charged correctly. For optimum daily performance, return the handset to the telephone base after use.

Disconnect the telephone line cord from your telephone and connect it to another telephone. If there is no dial tone on that other telephone either, then the telephone line cord may be defective. Try installing a new telephone line cord.

If changing the telephone line cord does not help, the wall jack (or the wiring to this wall jack) may be defective. Contact your telephone service provider.

You may be using a new cable or VoIP service, the existing telephone jacks in your home may no longer work. Contact your service provider for solutions.

The answering system does not record messages.

Make sure the answering system is on. When the answering system is on, ANS ON should display on the handset and the telephone base.

When the answering machine memory is full, it does not record new messages until some old messages are deleted.

If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail service answers. To determine how many rings activate your voicemail service, contact your telephone service provider.

The answering system does not announce the correct day

Make sure you have set the date and time. See Congure your telephone

section. of the week for recorded messages time stamp.

The messages on the answering system are incomplete.

If a caller leaves a very long

message, part of it may be

lost when the answering

system disconnects the call

after the preset recording

time.

If the memory on the

answering system becomes

full during a message, the

answering system stops

recording and disconnects

the call.

I accidentally set my LCD language to Spanish or French, and I

While the handset is not

in use, press MENU and

then enter 364# to change

the handset LCD language

back to English. don’t know how to change it back to English.

Limited warranty

What does this limited warranty cover?

The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase

(“Consumer” or “you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada.

What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (“Materially Defective Product”)?

During the limited warranty period, VTech’s authorized ser vice representative will repair or replace at VTech’s option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, ﬁre, water or other liquid intrusion;

2. Product that has been damaged due to repair, alteration or modiﬁcation by anyone other than an authorized service representative of VTech;

3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems;

4. Product to the extent that the problem is caused by use with non-VTech accessories;

5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible;

6. Product purchased, used, serviced, or shipped for repair from outside the United States of

America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes);

7. Product returned without a valid proof of purchase (see item 2 below); or

8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems

outside the unit.

How do you get warranty service?

To obtain warranty service in the USA, please

visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www. vtechcanada.com or call 1 (800) 267-7377.

NOTE: Before calling for service, please review the user’s manual - a check of the Product’s controls and features may save you a service call.

Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty.

What must you return with the Product to get warranty service?

1. Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difﬁculty; and

2. Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and

3. Provide your name, complete and correct mailing address, and telephone number.

Other limitations

This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTech’s responsibilities regarding the Product. There are no other

express warranties. No one is authorized to make modiﬁcations to this limited warranty and you should not rely on any such modiﬁcation.

State/Provincial Law Rights: This warranty gives you speciﬁc legal rights, and you may also have other rights, which vary from state to state or province to province.

Limitations: Implied warranties, including those of ﬁtness for a particular purpose and merchantability (an unwritten warranty that the Product is ﬁt for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost proﬁts or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Please retain your original sales receipt

as proof of purchase.

Technical specications

Frequency control

Transmit frequency

Channels 5

Nominal effective range

Power requirements

Memory Directory:

Crystal controlled PLL synthesizer

1921.536-1928.448 MHz

Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use.

Handset: 2.4V Ni-MH battery Telephone base: 6V DC @ 400mA Charger: 6V AC @ 300mA

30 memory locations; up to 30 digits and 15 characters

Caller ID log: 30 memory locations; up to 24 digits and 15 characters