VSSI Peninsula Instructions Manual
The Peninsula
™
Folding Lift Table
Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Parts Identification . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation with Scale Option . . . . . . . . . . . . . . . 4
Scale Features/Operation. . . . . . . . . . . . . . . . . . 4-5
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . 5
Care & Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Product Warrant . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table of Contents
Features & Operation
Pre-Installation
Thank you for purchasing The
Peninsula™ Folding Lift Table!
Open the package carefully. Please
inspect the shipping carton and contents
for any visible damage.This is important
in the event that any breakage has
occurred during transit.
The Peninsula™ Folding Lift Table is
fully assembled and contained within one
carton on a pallet. Do not attempt
to move the table by yourself – it is
very heavy! Improper handling may
result in injury to yourself or damage
to the product.
NOTE:
PLEASE SAVE ALL
PACKAGING
UNTIL CERTAIN
YOU ARE SATISFIED
WITH THE PRODUCT
Note: If ordered with optional built-in
VSSI Way™ scale, the scale display is contained within a smaller box within the
carton on pallet.The display will need to
be plugged into the power outlet and
mounted onto The Peninsula™ Folding
Lift Table. See installation instructions.
Refer to the drawing below to identify
parts.
Parts Identification
2
The VSSI Way™
Display/Readout
(only on tables with
built-in scale option)
Restraint Rail
(One each side)
Restraint Cleat
(One each side)
Stainless Steel Exam
or The VSSI Way™
Scale Top
Adjustable
Leveling Feet
(4 places)
Enclosed Lift
Mechanism
AC
Power
Cord
No. 101-5640-31
Peninsula™ Folding Lift Table
with Hand Control
No. 101-5640-37
Peninsula™ Folding Lift Table
with Foot Control
No. 110-0310-10
Peninsula™ Folding Lift Table
with Scale with Hand Control
No. 110-0310-21
Peninsula™ Folding Lift Table
with Scale with Foot Control
Step-On Foot Control
(If foot control option)
AC Adapter
No. 703-0000-20
(only on tables
with built-in
scale option)
Hand
Control
(If hand
control
option)
3
Installation
Keep the table FOLDED during
installation.
When moving the The Peninsula™
Folding Lift Table, NEVER lift the table by
the stainless steel top or restraint rails!
Pick up and move the table holding on
to the base and column.
Mounting the The Peninsula™
Folding Lift Table:
It is recommended that you consult your
contractor for mounting this table to the
wall.VSSI, Inc. will not give specific
instructions for this procedure.
However, we do suggest that hardware
meet these minimum requirements: 3/8"
diameter, 600 lb. shear capacity, 1,600 lb.
pull capacity.
After installation, your table is ready for
operation. Plug in the power cord at the
base of the column. Remove the safety
pin (shown at right below).
The folding table top is operated by
depressing the lever under the top and
pulling down or pushing up on the top
at the same time.Although the folding
top is designed to stay in any position, a
manually operated safety pin (shown at
right) has been installed for added safety
during times when the table is not in use.
To raise and lower the table to desired
height, depress the up or down switch
of the hand or foot control.
If you purchased a scale top model,
continue with the instructions on the
next page. If you have an exam top
only, go to page 6.
DO NOT
lift by
stainless
steel exam
top!
DO NOT
use the
restraint
rails as
handles!
Lift table
by
grasping
base
Stand
upright
by
grasping
top center
of column
Lift table
by
grasping
base
6.75"
37.0"
16" 16"
2.25"
9.5 MIN
10.5 MAX
Mounting Template
Safety Pin
Loading...