Vs sassoon VSM500A User Manual

THEBEARDDESIGNER

TOOL TIPS

for the revolutionary 3D cutting system

for ultimate beard perfection

VSM500A

1

HEY YOU!

TAKE A BOW FINE SIR.

THINGS ARE LOOKING UP

& YOU’VE JUST MADE A

QUALITY PURCHASE

WITH THIS NEW GROOMING TOOL.

WE KNOW YOU’VE GOT THIS, BUT BEFORE YOU JUMP INTO
USING YOUR NEW SIDE KICK, HERE’S A FEW TIPS & TRICKS
TO KNOW BEFORE LETTING YOUR CREATIVITY RUN LOOSE.

HIT UP VSFORMEN.COM.AU FOR MORE GROOMING & INSPIRATION + HANDY
VIDEOS ON HOW TO GET THE MOST OUT OF YOUR NEW BEARD DESIGNER.

2

THE BEARD DESIGNER / TOOL TIPS

3

THE BEARD DESIGNER / TOOL TIPS

THE BEARD DESIGNER

BRAVO. YOU’VE MADE A QUALITY PURCHASE.
The Beard Designer uses a revolutionary 3D cutting system
for ultimate beard perfection.

1

5

9

4

1. Revolutionary 3D cutting
system

2. Titanium spinning blades

3. Lithium-ion power

4. Cordless use

5. Advan ced LED disp lay ­shows trimming setting,
timer with battery life
remaining & charging
reminder

44

2

7

7

8

12

6
7

10

6. Electronic adjustment
with 50 precision trimming
sett ings from 0. 4mm to
12mm

7. Motorised chrome-coated
all-in-one comb guide
adjusts trimming settings in

0.2mm steps

8. Smart m emory fun ction ­automatically memories
your la st settin g Simply
swit ch on & trim

11

1312 14

9. Smart cleaning system

- unique self-cleaning
function under running
water f or no-fus s
maintenance

10. Charging stand

11. We t & dry use

12. Lithium powered dual head
finishing trimmer (includes
1x AA lit hium batte ry)

13. Cleaning brush

14. Oil

THE BEARD DESIGNER / TOOL TIPS

THE BEARD DESIGNER,
UP CLOSE

1. 3D rotary cutting, for perfection in ever y pass
a. Fixed cutting blade – Titanium-c oated. Stronger & more durable self-

sharpening blades for accurate cutting, everytime.^

b. Moving cutting blade – Stainless s teel

2. Integrated chrome-coated comb guide

3. + and – buttons for motorised adjustment of cutting length

4. On/off button

Cleaning button

5.

6. Park It button - for safe storage of The Beard Designer.

Locks the appliance

7. LE D display shows cut ting length

8. LED display shows remaining usage time

9. LED display shows Timer symbol for charging reminder

10. LED display shows Cleaning symbol

11. LED display shows Par k It symbol

1.

10. 11.

3.

5.

4.

2.

7.

8.

6.

^Compared to traditional VSforMen stainless steel blades.

5

THE BEARD DESIGNER / TOOL TIPS

PREPPING YOUR
NEW TOOL

CHARGING

- The Beard Designer is so easy to use. But before you start using your new tool,
you must take the time to charge it for 3 hours before its firs t use. Your new tool
comes w ith a small amount of charge, but the initial charge will ensure your new
tool will have optimum power performance to give you smooth fast cutting, every
time.

- Before using for the first time, fully charge your new tool continuously for 3 hours.

- All subsequent charges will be for 90 minutes.

- To charge The Beard Designer, insert the small plug on the charging adaptor into
the hole on the back of the charging stand. Then plug t he charging adaptor into a
suitable mains power socket.

- Ensuring The Beard Designer is switched off, place it on to the charging stand so
the 2 charging prongs on either side of The B eard Designer sits snuggly into the
charging stand. Switch the charging adaptor on.

- The LED screen will light up for a few seconds to indicate it is charging, then it
will display the approx. cordless use time remaining. The display of the remaining
cordless use time continues to flash until the charge capacity reaches a maximum
of 40 minutes.

- A full charge will supply 40 minutes cordless runtime.

- A quick 5 minute charge gives you approx. 3 minutes cordless use, for a single
stubble or beard trim.

HEADS UP

- When the LED screen displays that there are 5 minutes of cordless use time
remaining (“0.5”), the Timer symbol
remaining cordless use time flashes, The Beard Designer needs to be charged.
Pop it into the charging stand and it’ll be good to use again in no time.

6

changes from orange to red, and the

THE BEARD DESIGNER / TOOL TIPS

GETTING TO KNOW
YOUR NEW
GROOMING TOOL

The Beard Designer has been designed w ith a professional motor and 3D rotary
cutting head for perfec tion in every pass.

The Beard Designer has been designed f or unparalleled comfort, and it can
be used in different directions for keep your facial hair trimmed, smart and
sophisticated.

You can use The Beard Designer as a wet or dry trim, whatever suits you.

A REVOLUTION IN STUBBLE + BEARD MASTERY

Just like riding a bike, new things can take some prac tice, and The Beard
Designer is no different. The more you use it, the more comf ortable you become.

This tr immer can be used in cir cular movements or you can go backwards and
forwards with The Beard Designer over the face and neck . After using T he Beard
Designer a few times, you’ll quickly become comfortable and trimming will be
a breeze.

7

THE BEARD DESIGNER / TOOL TIPS

HOW TO USE THE
BEARD DESIGNER

BEFORE USING

• Always inspect the trimmer blades for noticeable signs of damage.

• Always inspect the trimmer blades before use to ensure they are free from
hair, debr is etc.

• Ensure the trimmer is sufficiently charged before use.

SELECTING A TRIMMING LENGTH

Stubble + beard mastery like a pro! The Beard Designer has a motorised chrome­coated all-in-one comb guide that adjusts trimming settings in 0.2mm steps.
You can easily adjust the comb guide to your de sired length using the + and –
buttons. Ther e are 50 precision trimming set tings from 0.4mm to 12mm, for all
types of stubbl e and beard looks. The trimming length setting will be shown on
the LED display and will adjust as you press the + and – buttons up or down.

8

THE BEARD DESIGNER / TOOL TIPS

1. Before switching on, ensure that the 3D rotary cutting head is per fectly clipped
into place before use.

2. Press the
shown on the LED display.

3. Select the desired trimming length setting using the + and – buttons.

4. Press the
using The Beard Designer.

5. To switch off, hold down the
length is now set for the next use. Pres s the
Designer again.

On/Off button once. The trimming length + cordless usage time are

button a second time. The motor now switches on and you can start

button for approximately 2 seconds. The cutting

button twice to start The Beard

HEADS UP

The LED display screen switches of f automatic ally after 60 seconds of disus e.
If you want to switch The Beard Designer to standby mode, press the

button once.

SMART MEMORY FUNCTION

• The Beard Designer automatically memories your last trimming setting used.

• When The Beard Designer is switched on, the integrated motorised chrome­coated comb guide will automatically return t o the last s electe d trimming
setting. Now that’s smart!

9