Vs sassoon VS955A User Manual

THEPROCLIP

TOOL TIPS

for the professional grade clipper

for intensive cutting performance.

1

VS955A

HEY YOU!

TAKE A BOW FINE SIR.

THINGS ARE LOOKING UP

& YOU’VE JUST MADE A

QUALITY PURCHASE

WITH THIS NEW GROOMING TOOL.

WE KNOW YOU’VE GOT THIS, BUT BEFORE YOU JUMP INTO
USING YOUR NEW SIDE KICK, HERE’S A FEW TIPS & TRICKS
TO KNOW BEFORE LETTING YOUR CREATIVITY RUN LOOSE.

HIT UP VSFORMEN.COM.AU FOR MORE GROOMING & INSPIRATION.

2

THE PRO CLIP / TOOL TIPS

3

THE PRO CLIP / TOOL TIPS

THE PRO CLIP

BRAVO. YOU’VE MADE A QUALITY PURCHASE.
The Pro Clip is the professional grade clipper for intensive
cutting performance.

1 4

7

3

1. Diamond
sharpened blades

2. Cord/Cordless use

3. DC dire ct drive
motor

4. 45mm clipping
blade

44

2

5. Grade s #1 – 8
comb guides (3mm
to 25mm) f or
cutting, shaping &
fading

5

111213 9 10

8

6. Left + r ight ear
taper cutting comb
guide s for the
finishing touches
aroun d the ears

7. 5 position taper
control

8. Pouch

9. Barber comb

10. Scissors

11. Cleaning brush

12. Cleaning hook

13. Oil

6

PREPPING YOUR
NEW TOOL

CHARGING

The Pro Clip hair cl ipper is so easy to use. But before you star t using your new
tool, you must take the time to charge it overnight f or 16 hours before its first
use. Your new tool comes with a small amount of charge, but the initial charge
will ensure your new tool will have optimum power per formance to give you
smooth fast cutting, every time..

- Before using for the first time, fully charge your new tool continuously for
16 hours.

- Maximum battery capacity will only be reached after 3 charging &
discharging cycles.

- Ensure your new tool is switched off.

- Inser t the small plug on the charging adaptor into the socket on the bottom
of your new tool.

- Plug the charging adaptor into a suitable mains power socket and switch on.

- The green charging LED indicator light on your new tool will remain on when
correctly connected to the mains power.

- A full charge of 16 hours will supply 40 minutes cordless runtime.

THE PRO CLIP / TOOL TIPS

5

THE PRO CLIP / TOOL TIPS

MAINS OPERATION

The clipper should not be used for longer than 20 minutes when operated from the
mains. Wait 1 minute after connecting to the mains power bef ore switching on.

OILING THE BLADES

To get the sharpest, most precise cut, it is highly recommended to oil the blades
before each use.

Using the oil supplied with your new tool, unscrew the cap & cut o ff the ver y end
of the plastic tube with a pair of scissors to release the oil .

Switch your tool on, gently squeeze the oil tube & apply 2 drops of oil onto the
blades. Leave the tool on for a further few seconds to allow the oil to thoroughly
spread across each of the bl ades. Switch off the tool & remove any excess oil by
gently dabbing with a cloth.

6