VS Sassoon Pro-50 intensive VS955A User Manual

Model VS955A

Pro-50 intensive

SAFETY CAUTIONS

WARNING! Polythene bags over the product or packaging may be

dangerous. To avoid danger of suffocation, keep away from babies
and children. These bags are not toys.

• Do not use or leave the appliance where it can become wet or where
there is a danger of it falling into basins or other vessels
containing water.

• This appliance should only be used as described within this
instruction book. Please retain for reference.

• Do not connect the appliance to the mains with wet hands.

• Always inspect the appliance before use for noticeable signs of
damage. Do not use if damaged, or if the appliance has been

dropped.

• Do not use the appliance if the lead is damaged.

• Only use the adaptor and attachments supplied with this

appliance.

• Always unplug the appliance when fully charged.

• Do not leave the appliance unattended when switched on.

• Do not place the appliance on any surface whilst in operation.

• This appliance should not be used by adults or children whose lack

of experience, product knowledge or disability might cause a
hazard, unless they have been correctly instructed and are adequately
supervised.

• Children should always be supervised to ensure that they do not

play with this product.

• Special care is required when using the appliance close to the

ears, eyes and face.

• Always switch off and unplug the appliance when cleaning or

when not in use.

• Allow the appliance to cool before storing away.

• After use, do not coil the cord around the appliance as this may

cause damage to the cord. Instead, coil the cord loosely by the
side of the appliance.

• This appliance complies with the requirements of Directives
2004/108/EC (Electromagnetic Compatibility) and 2006/95/EC

Electrical Safety of Domestic Appliances).

• This appliance contains Ni-MH battery. To protect the environment

this appliance and its batteries must be disposed of safely. At the
end of its life, please take this appliance to a recycling centre.

• If the battery is leaking do not touch it and take it to a recycling
centre.

PRO-50 INTENSIVE

the Pro-50 Intensive is a professional grade hair clipper with
exceptional cutting performance, extreme precision and total

convenience. The powerful 3.6V DC motor delivers high cutting

action performance for fast results. This clipper can be used with
mains power or cordless for total convenience.

CLIPPER FEATURES

Exceptional Cutting Performance

• 45 mm Extra large blades with an exceptional sharpness –
stainless steel - Fixed blade: 4mm thickness – Moving blade:

1,5mm thickness

• Powerful motor – High torque

Extreme Precision

• 8 cutting guides : 3-6-9.5-13-16-19-22-25mm

• 2 ear contours guides (left/right)

• Taper control for ne tuning: 5 levels from 0,6mm to 3mm

Total Convenience

• Rechargeable : cord or cordless use - 40 minutes range - LED

charge indicator

• Accessories: adaptor, scissors, comb, cleaning brush, lubricating,

oil, cleaning hook, travel pouch

• 2 year warranty

INSTRUCTIONS FOR USE

IMPORTANT INFORMATION REGARDING THE NI-MH BATTERIES OF THIS UNIT

To obtain and maintain the longest battery autonomy possible,

allow it to charge for 16 hours before using it for the rst time and
then approximately every three months. Full autonomy of the unit

will only be obtained after three complete recharge cycles.

Charging the clipper

1. Plug the cord into the unit and connect the adaptor. Before using

the clipper for the rst time, allow it to charge for 16 hours. Make
sure the clipper’s switch is in the OFF position.

2. Check that the charging indicator light is lit.

3. A full charge provides up to 40 minutes of use of the clipper.

4. Subsequent charges should also be 16 hours .

Mains use

Connect the adaptor into the mains, wait 1 minute and then switch
into the ON position.
IMPORTANT ! Use only the adaptor provided with the clipper.

Oiling Instructions

IMPORTANT! It is highly recommended before each use to oil

the blades with the oil provided. This ensures optimum cutting
performance.

For the rst use you will need to use the oil supplied with the

product, unscrew the cap and cut off the very end of the plastic
tube with a pair of scissors to release the oil.

To oil the blades ensure the unit is switched on. Gently squeeze the

oil tube and apply 2 drops of oil onto the blades. Leave the unit on

for a further few seconds to allow the oil to thoroughly spread the
length of the blades. Switch off the unit and remove any excess oil
by gently dabbing with a cloth.