Wireless remote / Wireless presenter
User's Manual
Be sure to carefully read this user’s manual
first for the proper use of the
Mini Presenter and keep it for future reference.
1
Table of Contents
Introduction..................................................................... 2
I. Operation system ........................................................ 2
II. Parts description......................................................... 3
III. Installation ................................................................. 4
IV. Functions................................................................... 5
V. Functions table ...........................................................6
VI. Operating Hints ......................................................... 10
VII. Battery installation .................................................. 10
VIII. Troubleshooting....................................................... 12
IX. Technical parameters ................................................12
Safety Measures............................................................. 13
2
Instruction
It is a great tool for PowerPoint presentations! With it, you don't
need to stand beside your computer or have an additional
person click the slide for you!
The presenter provides two working modes----Cursor Mode and
Presenter mode.
It contains two parts: remote control and USB receiver
Advantage:
1. Easily control the pace of your presentation
Advanced radio frequency (RF) technology that works
through walls and control distance up to 15-meters / 50-feet
away, so you never have to stand at beside of your computer.
2. Multifunctional presenter
It combines the functions of a laser pointer and keyboard
hotkeys etc. If you need flash memory, the receiver supports
to be added built-in flash memory. ( 64/128/256/512/1024MB
optional ).
3. Easy to use
It is USB plug-and-play. No driver required. Just plug the
receiver into the USB port on a PC and it works within
seconds.
I. Operation System
Windows 98,Se,Me,2000,XP, Mac OS, Linux
3
II. Parts Description
USB Receiver
LED
4
III. Functions table:
Fn: Switch between Cursor Mode and Presenter Mode
A) Presenter Mode
PageUp
PageDown
Play Powerpoint
Blank Screen
Laser
ESC Esc
5
B) MousePointer Mode
Mouse point up
Mouse point down
Mouse point left
Mouse point right
Laser
L Mouse left key
Attention: There are two kind of speeds that the cursor
move (LowSpeed and HighSpeed)
(1) Push&Hold for less 1 second: LowSpeed
(2) Push&Hold for over 1 second: HighSpeed
LowSpeed: getting exact position
HighSpeed: Locating Fast
C) Built-in flash memory is optional
(no memory/64/128/256/512/1024MB )
6
V. Battery installation
The remote is powered by 1x CR2032 battery.
Push and remove the battery compartment cover.
Insert 1x CR2032 battery into the battery holder.
Put the battery compartment cover back into position.
① ②
Note
③
1. Do not insert battery into the device in the wrong direction.
2. Do not leave bad or exhausted battery in the device
3. If you do not use the device for a long period of time,
remove the battery to avoid possible damage from battery
corrosion.
4. If the device does not function correctly or if the operating
range becomes reduced, try to replace the battery with new
one.
④
7
VI. Technical parameters
Transmitter
Control distance Up to 15 meters
Battery 1 x CR2032
Working voltage 3V
Sleep current 1uA
Output Power 0dBm
Laser Power <1mw or 5mw
Wave length 630-680nm
Frequency 2.402GHz
Wireless method RF
Dimension 32×87×8mm
Weight 17g
Receiver
Operation system Windows 98/Se, Me, 2000, XP, Mac
USB version USB1.1 Compatible USB2.0
Working voltage 4.5-5.5v
Frequency 2.402GHz
Wireless method RF
Working voltage USB electricity supply (4.5-5.5V)
Dimension 32×63×8mm
Weight 11g
OS, Linux
8
Safety Measures
z To avoid possible eye damage, never point the presenter at
people especially their faces, or look directly into the
presenter’s laser beam.
z Avoid pointing the presenter’s laser beam at a mirror or other
highly reflective surface.
z Keep the presenter away from young children.
z Never view the presenter’s laser beam using telescopic
devices, such as a microscope or binoculars.
z Any attempt to disassemble, adjust or repair the presenter
may result in exposure to laser light or other safety hazards.
9
Warning:
This equipment has been tested and found to com ply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protectio n against harmful interference in a
residential installation. This equipm ent generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interf erence to radio communications.
However, there is no guarantee that interference wil l not occur in a particular
installation. If this equipment does ca use harmful interference to radio or
television reception, which can be determined by turning the equipm ent off
and on, the user is encouraged to try to correct the interf erence by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipm ent and receiver.
—Connect the equipment into an outl et on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced ra dio/TV technician for help.
Modifications not authorized by the m anufacturer may void users authority to
operate this device.
10
Loading...