Integrative Mini Presenter
User's Manual
Be sure to carefully read this user
manual first for the proper use of the
Integrative Mini Presenter and keep it for future reference.
Table of Contents
Introduction ..................................................................... 2
I. Operation system ........................................................ 2
II. Functions .................................................................. 3
III. Operating Hints .......................................................... 3
IV. Battery installation ..................................................... 4
V. Technical parameters .................................................. 5
VI. Safety Measures ....................................................... 5
1
Instruction
It is a great tool for PowerPoint presentations! With it, you don't
need to stand beside your computer or have an additional
person click the slide for you!
It contains two parts: transmitter and USB receiver.
Features:
1. Easy carry
The transmitter and receiver are integrated into one unit to
easy carry!
2. Easily control the pace of your presentation
Advanced radio frequency (RF) technology that works
through walls and control dist ance i s 10- m ete r s / 3 2-feet away,
so you never need to stand at beside of your computer.
3. Multifunctional presenter
It combines the functions of a laser pointer and hotkeys.
4. Easy to use
It is USB plug-and-play. No driver required. Just plug the
receiver into the USB port on a PC and it works within
seconds.
I. Operation System
Windows 98, Se, Me, 2000, XP, Mac OS, Linux, Vista, Win 7
( Attention : you may need Win98 disk if your computer runs
under Win98/SE operating system.
2
II. Functions:
Function table:
Page Up
Page Down
Play PowerPoint, Press again to exit ( For PowerPoint
only )
Blank Screen ( For PowerPoint play only )
Alt+Tab
Laser Pointer
III. Operating Hints
For optimal performance and RF reception place the receiver
at least 15cm away from all electrical devices, such as your
monitor, speakers or external storage devices.
3
IV. Battery installation
● The product is powered by 2x AAA battery.
● Push and remove the battery cover.
● Insert 2x AAA battery into the battery holder.
● Put the battery cover back into position.
Note
1. Do not insert battery into the device in the wrong direction.
2. Do not leave bad or exhausted battery in the device
3. If you do not use the device for a long period of time,
remove the battery to avoid possible damage from battery
corrosion.
4. If the device does not function correctly or if the operating
range becomes reduced, try to repl ace th e bat tery w ith new
one.
V . Technical parameters
Transmitter
RF Frequency 2.4GRF
Control distance 10 meters
Laser distance Up to 200M
Battery
Working voltage
Sleep current
Dimension 105.0X30.0X14.0MM
Weight 44.7g（Include receiver）
AAA X2
2.4-3.0V
＜10uA
4
Receiver
Operation system
Interface USB1.1 , Compatible with USB2.0
Working voltage USB electricity supply (4.5-5.5V)
Dimension 21.7X14.5X7.4MM
Weight 2g
VI. Safety Measures
To avoid possible eye damage, never point the presenter at
people especially their faces, or look directly into the
presenter’s laser beam.
Avoid pointing the presenter’s laser beam at a mirror or other
highly reflective surface.
Keep the presenter away from children.
Never view the presenter’s laser beam using telescopic
devices, such as a microscope or binoculars.
Any attempt to disassemble, adjust or repair the presenter
may result in exposure to laser light or other safety hazards.
NOTE
The product adopts advance RF technology, the USB receiver
will identify the first transmitter which is used. If you want to use
different transmitters with the same receiver, please pull off the
receiver and plug it again, after 6 seconds, press any key of the
transmitter you want to use. Then it can work successfully.
Windows 98/Se/Me/2000/XP/ Mac OS/ L inux/
Windows Vista /Win 7
5
Warning sticker:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
6
Loading...