Integrative Presenter
User's Manual
Be sure to carefully read this user’s
manual first for the proper use of the
Integrative Presenter and keep it for future reference.
Table of Contents
Introduction..................................................................... 2
I. Operation System........................................................ 2
II. Components...............................................................3
III. Functions .................................................................3
IV. Operating Hints.......................................................... 3
V. Battery Installation......................................................4
VI. Tec hnical Parameters................................................5
VII. Safety Measures......................................................5
1
Instruction
It is a great tool for PowerPoint presentations! With it, you don't
need to stand beside your computer or have an additional person
click the slide for you!
It contains two parts: a transmitter and a USB receiver.
Features:
1. Easy carry
The transmitter and receiver are integrated into one unit for easy
carry!
2. Easily control the pace of your presentation
Advanced radio frequency (RF) technology that works through
walls and the controlling distance is up to 8-meters / 24-feet away,
so you never have to stand at beside of your computer.
3. Easy to use
It is USB plug-and-play. No driver required. Just plug the receiver
into the USB port on a PC and it works within seconds.
I. Operation System
Windows 98, Se, Me, 2000, XP, Mac OS, Linux
2
II. Components
Transmitter USB Receiver
III. Functions:
Function table:
Page Up
Page Down
Laser Pointer
IV. Operating Hints
1. For optimal performance and RF reception, please place the
receiver at least 15cm away from all electrical devices, such
as your monitor, speakers or external storage devices.
2. Please use the USB extension cable, if th e contr ol di st a nce of
the Presenter works abnormally.
USB Plug
3
V. Battery Installation
z The product is powered by 2x LR1 battery.
z Turn around and open the battery compartment .
z Insert 2x LR1 battery into the battery holder.
● Battery negative (-) is left and positive (+) is right as below.
z Turn around battery compartment back into position.
Note
1. Do not insert battery into the device in the wrong direction.
2. Do not leave bad or exhausted battery in the device.
3. If you do not use the device for a long period of time, remove
the battery to avoid possible damage from battery corrosion.
4. If the device does not function correctly or if the operating
range becomes reduced, try to replace the battery with new
one.
4
VI. Technical Parameters
Transmitter
Class Class II Class III
Frequency 2.453GHz 2.453GHz
RF Output
Power
Control distance 8m 8m
Laser distance > 200m > 200m
Battery LR1X2 LR1X2
Working voltage 3.0V 3.0V
Sleep current <10uA <10uA
Wavelength 650nm 650nm
Laser < 1mW < 5mW
Dimension H=15.8cm, Ø=1.45cm H=15.8cm, Ø=1.45cm
Weight (Without
battery)
USB Receiver
Operation system Windows 98,Se, Me, 2000,XP, Mac OS, Linux
USB version USB1.1 Compatible USB2.0
Working voltage USB electricity supply (4.5-5.5V)
Weight 12g
VII. Safety Measures
z To avoid possible eye damage, never point the presenter at
<-15dBm <-15dBm
32g 32g
people especially their faces, or look directly into the presenter’s
laser beam.
z Avoid pointing the presenter’s laser beam at a mirror or other
highly reflective surface.
z Keep the presenter away from children.
z Never view the presenter’s laser beam using telescopic devices,
such as a microscope or binoculars.
z Any attempt to disassemble, adjust or repair the presenter may
5
result in exposure to laser light or other safety hazards.
Note
z The product has been matched before ex-factory for convenient
use. Every presenter has an exclusive code!
Do not exchange the transmitter and receiver to other
presenters! Please contact with the local dealer if mixed.
z Warning:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
6
Loading...