Embedded Type Presenter
User’s manual
Be sure to carefully read this user’s
manual first for the proper use of the
Embedded Type Presenter and keep it for future reference.
Ta bl e o f Contents
Introduction..................................................................... 1
I. Operation system ........................................................1
II. Components...............................................................2
III. Functions .................................................................3
IV. Battery installation..................................................... 4
V. Technical parameters..................................................5
VI. Safety Measures....................................................... 6
1
Thank you for purchasing the Embedded Type Presenter. This
manual will provide you directions for the safe and efficient
operations of your Embedded Type Presenter.
It is a tool for PowerPoint Presentation.
It works as a laser pointer, a remote, a portable storage device.
It contains two parts: transmitter and USB receiver.
Features:
1. Easy carry
The transmitter and receiver are integrated into one unit to easy
carry!
2. Easily control the pace of your presentation
Advanced radio frequency (RF) technology that works through
walls and control distance up to 10-meters / 50-feet away, so
you never have to stand at beside of your computer.
3. Multifunctional presenter
It combines the functions of a laser pointer and hotkeys. If you
need flash memory, the receiver supports to be added built-in
flash memory .
(No memory/128MB/256MB/512MB/1GB/2GB/4GB)
.4. Easy to use
It is USB plug-and-play. No driver required. Just plug the
receiver into the USB port on a PC and it works within seconds.
I. Operation System
Windows 98, Se, Me, 2000, XP, Windows vista
II. Components
Embedded surface
Pull
USB Receiver
USB Plug
USB Cover
.
2
Push
Transmitter
III. Functions
A) Function table:
Page Up
Page Down
Play PowerPoint ( For PowerPoint only )
Blank Screen ( For PowerPoint play only )
Laser Pointer
B) Built-in flash memory is optional
(No memory/128MB/256MB/512MB/1GB/2GB/4GB)
3
IV. Battery installation
● T he product is powered by 1x CR2032 battery.
● Push and remove the battery compartment cover.
● Insert 1x CR2032 battery into the battery holder.
● B attery positive (+) is up and negative (-) is down.
● Put the battery compartment cover back into position.
Note
1. Do not insert battery into the device in the wrong direction.
2. Do not leave bad or exhausted battery in the device
3. If you do not use the device for a long period of time, remove
the battery to avoid possible damage from battery corrosion.
4. If the device does not function correctly or if the operating
range becomes reduced, try to replace the bat tery wi th new one.
4
VI . Technical parameters
Transmitter
RF Frequency 2.453 GHz
RF Output
Power
Control distance Up to 10 meters
Battery 1 x CR2032
Working voltage 3 V
Sleep current 1uA
Dimension 92X33X8 mm
Weight 20g(without battery)
Receiver
Sensitivity -100dBm
Interface USB
Operation
system
USB version USB1.1 , Compatible with USB2.0
Working voltage USB electricity supply (4.5-5.5V)
Dimension 92X25X8 mm
Weight 16g
< 0 dBm
Windows 98/Se, Me, 2000, XP, Vista,
Mac OS, Linux
5
VII. Safety Measures
z To avoid possible eye damage, never point the presenter at
people especially their faces, or look directly into the
presenter’s laser beam.
z Avoid pointing the presenter’s laser beam at a mirror or other
highly reflective surface.
z Keep the presenter away from children.
z Never view the presenter’s laser beam using telescopic
devices, such as a microscope or binoculars.
z Any attempt to disassemble, adjust or repair the presenter
may result in exposure to laser light or other safety hazards.
Note！！
z The product has been matched before ex-factory for
convenient use. Every presenter has an exclusive code! Do
not exchange the transmitter and receiver to other
presenters! Please contact with the local dealer if mixed.
z For optimal performance and RF reception, Please use the
USB extension cable, if the control distance of the Presenter
works abnormally.
6
Warning:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
7
Loading...