Page 1
Reference / Product name: ZF713
Version/Revision (date): 19/05/2015
Printing date: 27/05/2015
page 1 of 6
Voluntary product information based on the format of a safety data sheet
for coated abrasives
1. Identification of the product and of the company/undertaking
1.1 Product identifier
ZF713
1.2 Use of the product
Abrasives for industrial and professional application
1.3 Details of the supplier of the voluntary product information:
Company: VSM Abrasives Corporation
Address: 1012 E. Wabash O´Fallon,
MO 63366
Telefon: 800-737-0176 Fax: 636-272-7434
E-mail: [email protected]
1.4 Emergency telephone number:
Tel.: 1-800-262-8200
2. Hazards identification
2.1. Classification
Not classified as hazardous according OSHA Hazard Communication Standard, 29 CFR 1910.1200.
2.2. Label elements
Not applicable.
2.3. Other hazards
Not known.
Page 2
Reference / Product name: ZF713
Version/Revision (date): 19/05/2015
Printing date: 27/05/2015
page 2 of 6
Substance
EC-N°
CAS-N°
Conc. (%)
Classification acc. to Regulation (EC) N°
1272/2008 (CLP)
Hazard classes/
hazard categories
Hazard statements
cryolite
237-410-6
13775-53-6
1-8%
Acute Tox. 4
STOT wdh. 1
Acute Tox. 4
Aqu. chron. 2
H332
H372
H302
H411
3. Composition/information on ingredients
The product contains the following ingredients which are classified according to 67/548/EEC or Regulation
(EC) Nr. 1272/2008 or for which a community occupational exposure limit value exists:
(For full text of H- and R-phrases see section 16)
4. First aid measures
See also section 8 and 16
4.1. Description of first aid measures
Inhalation: Not possible, due to the form of the product
Eye contact: Not possible, due to the form of the product
Skin contact: No harmful effects known
Ingestion: Not likely, due to the form of the product; if necessary contact physician
Note to physician: Not available.
4.2. Most important symptoms and effects, both acute and delayed
Not known.
4.3. Indication of any immediate medical attention and special treatment needed
Not relevant. Treat symptomatically.
5. Fire fighting measures
5.1. Extinguishing media
Extinguishing media: water, foam, sand, powder or CO2 as appropriate for surrounding materials
Page 3
Reference / Product name: ZF713
Version/Revision (date): 19/05/2015
Printing date: 27/05/2015
page 3 of 6
Substance
CAS-N°
Agency
Threshold limits
Cryolite
15096-52-3
ACGIH
TWA (as F): 2.5 mg/m3
OSHA
TWA (as dust): 2.5 mg/m3, TWA (as
F): 2.5 mg/m3
alpha-Alumina
13-44-28-4
OSHA
TWA (as total dust): 15 mg/m3; TWA
(respirable fraction): 5 mg/m3
CMRG
TWA: 1 fiber /cm3
5.2. Special hazards arising from the product
Toxic fumes may occur. Use respiratory protective equipment.
5.3. Advice for fire fighters
Extinguishing materials should be selected according to the surrounding area.
6. Accidental release measures
Not applicable.
7. Handling and storage
Follow instructions of grinding machine manufacturers and the relevant national regulations. In addition,
observe the safety recommendations of the manufacturer.
8. Exposure controls/personal protection
8.1. Control parameters
Before grinding it is recommended to perform a risk assessment and to use personal protection
equipment accordingly.
Occupational exposure limit values and/or biological limit values
Keep exposure to the following components under surveillance.
(Observe also the regional official regulations)
ACGIH: American Conference of governmental Industrial Hygienists
CMRG: Chemical Manufacturer´s Recommended Guidelines
OSHA: United States Department of Labor – Occupational Safety and Health Administration
TWA: Time-Weighted-Average
STEL: Short Term Exposure Limit
Note: Hazardous dust of the workpiece material may be generated during grinding and/or sanding
operations. National regulations for dust exposure limit values have to be taken into consideration.
Page 4
Reference / Product name: ZF713
Version/Revision (date): 19/05/2015
Printing date: 27/05/2015
page 4 of 6
8.2. Exposure controls
8.2.1. Individual protection measures
8.2.1.1. Respiratory protection: Use respiratory protective equipment
(type depends on specific application and material being ground)
8.2.1.2. Hand protection: Wear protective gloves
(type depends on specific application and material being ground)
8.2.1.3. Eye protection: Wear protective goggles or face shield
(type depends on specific application and material being ground)
8.2.1.4. Hearing protection: Use hearing protection
(type depends on specific application and material being ground)
8.2.1.5. Body protection: Use protective clothing
(type depends on specific application and material being ground)
9. Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state: solid
Colour: not applicable/different colors
pH: not applicable
Melting point: not applicable
Boiling point: not applicable
Density: not applicable
Viscosity: not applicable
Solubility in water: not relevant (article)
9.2. Other information
None.
10. Stability and reactivity
10.1. Reactivity
Coated Abrasives are stable when handled or stored correctly.
10.2. Chemical stability
No decomposition in normal use.
10.3. Possibility of hazardous reactions
No dangerous reactions known.
Page 5
Reference / Product name: ZF713
Version/Revision (date): 19/05/2015
Printing date: 27/05/2015
page 5 of 6
10.4. Conditions to avoid
Coated Abrasives are stable when handled or stored correctly.
10.5. Incompatible materials
No dangerous reactions known.
10.6. Hazardous decomposition products
At temperatures exceeding 250° C hazardous or toxic decomposition products may be generated.
11. Toxicological information
11.1. Information on toxicological effects
No toxicological effects if inhaled or swallowed or with eye or skin contact are known.
See also section 8.
12. Ecological information
12.1. Toxicity
No effects known.
12.2. Persistence and degradability
No biodegradable potentials known.
12.3. Bioaccumulative potential
No potentials known.
12.4. Mobility in soil
No potentials known.
12.5. Results of PBT and vPvB assessment
Not relevant.
12.6. Other adverse effects
No effects known.
13. Disposal considerations
13.1. Disposal methods
13.1. Product
Follow local/ regional/ national/ international regulations.
13.2. Packing
Follow local/ regional/ national/ international regulations.
Page 6
Reference / Product name: ZF713
Version/Revision (date): 19/05/2015
Printing date: 27/05/2015
page 6 of 6
14. Transport information
The product is not regulates per U.S. DOT, IATA or IMO.
15. Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the product
No specific labelling requirements under respective EC directives.
15.2. Chemical safety assessment
Not relevant.
16. Other information
Changes to the previous versions
See sections 1 to 16.
Hazard statements referred to in section 2 and 3
H332 Harmful if inhaled.
H372 Causes damage to organs through prolonged or repeated exposure. Target organs: lungs,
skeleton
H302 Harmful if swallowed.
H411 Toxic to aquatic life with long lasting effects
The above information is based on our current standard of knowledge and does not constitute any
warranty of conditions of the product. The information does not form part of any contractual agreement.
It remains the user’s responsibility to adhere existing laws and regulations.
Revision Date: 19/05/15
Issued by: R & D
Contact: Dr. Jessica Tschirch
Loading...