VSIONIS VIS-8008 Instructions Manual

SPECIFICATIONS:

Model Number: VIS-8008
Voltage: 12/24V
Frequency: 315 MHz
Current Draw: 10Ma
Number of Buttons: 2
Encoding Type: Fixed
Operating Distance: Up to 320 Feet (100M)
Compatible Receiver: VIS-8007
No. of Remotes that are able to connect to one receiver: Up to 20
LED Transmission: Blue LED light
Includes: 2 pieces of the 3v CR2016

Over 1,048,576 codes

Instructions to program a new Transmitter (remote):

Note: Before you start to program the Transmitter (remote) make sure you have the Receiver ready to be
programmed. You may only use the Vsionis Receiver model number VIS-8007.

 Each VIS-8007 Vsionis receiver can program up to 20 Transmitters (remotes) (VIS-8008)
 Make sure that while you are programming the transmitter (remote) you have the remote in your hands

ready to be programmed.

 Press the programming switch for 3 seconds or more. The channel’s LED will start to flash quickly. This

will indicate that it is in programming mode.

 When the LED light begins to Flash, Press the button of the Transmitter (remote) to be programmed

one time. The receiver’s Channel light will flash once to show that that the transmitter (remote) has
been programmed successfully. After the transmitter (remote) has been programmed the receiver will
automatically exit the programming

2-Channel 315 MHz Transmitter

(Remote)

VIS-8008

The model VIS-8008 is a 2-Channel 315 MHz charcoal and silver remote supplied with a quick-disconnect
key ring. This transmitter (remote) is designed for use with the VSIONIS VIS-8007 2 channel receiver. This
transmitter (remote) has over 1,048,576 codes of programming which makes it virtually impossible of the
codes being duplicated. The receiver programs each specific code; no unauthorized person can gain access
to the system by reprogramming or duplicating the Transmitter (remote). This transmitter (remote) can be
programmed locally into the memory of the receiver (VIS-8007).