VS Audio ALCHEMY MKII User guide

Page 1
TONE YOUR W AY
vsaudio.com
ALCHEM Y
Page 2
ALCHEM Y M KII
DESCRIPTION
Analog bucket-brigade technology based on 3207 BBD chip
Smooth Ultra-warm modulation.
Tap tempo functionality
Six favorite presets.
True Bypass.
CONTROLS
1
MIX knob controls ratio of wet and dry signal
2
DELAY knob sets delay time that the LFO modulates around. SPEED knob controls sweep rate of the eect.
3
4
DEPTH knob controls intensity of the eect.
5
BYPASS LED
6
PRES
PRESET LED
7
BYPASS ootswitch toggles eect on/bypass (red LED pulses at the rate of the LFO).
8
PRESET
i) Sets tempo of the LFO (RED LED pulses at the rate of the LFO). ii) Hold down Footswitch selects favorite preset
ii) Hold d (indicated by multicolor LED).
1
2
3
4
5
6
7
8
SPEED
BYPASS PRESET
DELAYMIX
DEPTH
PRESET MODE & LIVE MODE
There are two modes that you can choose from. In LIVE MODE all the control knobs behave as normal (PRESET LED is OFF) In PRESET MODE all the control knobs dont change your favorite preset (PRESET LED is ON)
To engage PRESET MODE and to recall your favorite preset, press and hold the PRESET footswitch, (PRESET LED indicator turns ON).
To change between presets press the PRESET footswitch, (PRESET LED indicator change color).
To return to LIVE MODE press and hold the PRESET footswitch, (PRESET LED indicator turns OFF) R
Remember when you are in PRESET MODE, you can change presets even if the eect is disengaged.
EDIT & SAVE YOUR FAVORITE PRESET
Adjust the control knobs as desired.
Press and hold both BYPASS and PRESET footswitch at the same time. (PRESET LED indicator blinks).
Choose the preset you want to edit by pressing the PRESET footswitch. (PRESET LED indicator change colors).
Press and keep holding BYPASS footswitch and then press PRESET footswitch for 3 seconds. (PRESET LED indicator blinks three times).
Your favorite PRESET is saved. Remember that all your presets are stored and saved even if you unplug the power adaptor.
POWER
The Vs Audio ALCHEMY MK II chorus is powered by any 9 volt adapter, or any multi-power supply brick for eect pedals (recom- mended power supply output 9V DC 200mA).
FACTORY PRESETS
BLUE PRESET
SPEED
PURPLE PRESET
SPEED
DELAYMIX
DEPTH
DELAYMIX
DEPTH
GREEN PRESET
SPEED
YELLOW PRESET
SPEED
SPECIFICATIONS
Input Impedance 1MΩ
Output Impedance 10kΩ
Chorus Delay Time 2.56 - 25.6ms
Modulation Speed 0.5-5.5 Hz
Bypass True Relay Switched
Current Draw 100 mA
C
DELAYMIX
DEPTH
DELAYMIX
DEPTH
RED PRESET
DELAYMIX
SPEED
SPEED
DEPTH
WHITE PRESET
DELAYMIX
DEPTH
VS AUDIO
4 MAVROMATEON Str, ILION
ATHENS, GREECE
Loading...