VRS Fleet Products CJV1 Pro HD User Manual

1280X720 High Denition Vehicle Black Box
User’s Manual
Read user’s manual carefully in order to protect the user’s safety and ensure toaccurate use of the product.
CJV1-Pro
SINGLE DASH CAMERA
CJV1
Caution
Product Features
Component
Name of product details
Product Specification
Product Description
How to install
Exclusive PC Viewer
Product Warranty
How to format SD Card
Voice Announcement and LED
Warranty and Limitation of Liability/ Precaution
SD Card / How to remove SD Card
How to use
Content
12~13
16~20
VRS Fleet Products nor its aliate partners is not liable for any problems caused by violating the Statements written in the user’s manual.
- VRS Fleet Products is not liable for the product malfunction, loss of data and/or any damages Incurred when using the product.
- Consistent care and attention is essential when handling the SD Card that saves recorded data.
- CJV1- Pro HD was developed to record and save video footage of vehicle accidents and/or any impact to the vehicle.
- VRS Fleet Products and its aliate partners is not liable for recording and saving every stream
- VRS Fleet Products and its aliate partners is not liable for battery discharge or re caused by incorrect installation or arbitrary modication when connecting to a constant power cable.
- The power supply should use recommended voltage otherwise it can cause damage to the camera.
- Do not arbitrarily disassemble and modify the camera otherwise it can cause damage to the product and/or electric shock to user. It will be considered user’s fault and void the warranty.
- Make sure that the power cable is not cut and/or damaged when attaching other electronic gadgets to the vehicle; otherwise it can cause product failure or electric shock.
- It is highly recommended not to connect a constant power cable to the CJV1-Pro HD camera. This can cause malfunction to the camera due to the dierent conditions of vehicle and surrounding environments. (Janus Cam is not liable for vehicle battery discharges or damages caused by using a constant power cable connection).
The product and the user’s manual can be changed without prior notice to ensure user’s convenience and improve product quality and performance and please be advised to visit http://vrseetproducts.com for any changes and updates.
Before using this product 1
Warranty and Limitation of Liability
Precaution
of video.
Camer h fore inserting and removing SD memory card.
- Do not disassemble the SD card by force as it can cause the damage to the product.
- Do not disconnect the SD card while the camera is on. It can cause data corruption and damage to the SD card.
- Be advised to keep the SD card in the card case when you keep or move from camera, otherwise data can be corrupted by static electricity or external power voltage.
- SD card should be placed in a card case when it has been removed from camera otherwise data can be corrupted (do not use this product under high temperatures).
- It is highly recommended to store important data on HDD, CD or an external storage device.
- It is highly recommended to check the recorded data at least once a week. SD card should be formatted once a month.
- It is highly recommended to regularly check and back-up SD cards. The life of the SD card can be shortening by long-term use which can cause camera to malfunction. Malfunctions will preven
nto the SD Card. (if the SD card is inserted into the camera after it has been formatted, the folders will automatically be created to record and save data.)
SD Card
How to remove the SD card
2 Caution
the power cable from the camera. Please follow the below directions before inserting or removing the SD card.
- If CJV1-Pro HD is disconnected from power source, it can record videos for 5 to 10 seconds.
SD card Insert
1. Insert the SD card into the main slot on the camera.
2. Turn on the ignition when the camera is connected into cigarette lighter adapter.
Insert or remove the SD card when the power cable is disconnected from camera.
1. T
2. Make sure that the LED ligh
3. Make sure CJV1-Pro HD camer
(removing the SD card by force can cause damage to the camera. Lightly press SD card to remove)
Please follow the below guidelines to prevent damages to camera and SD card.
- For rst time use, format a new SD card on PC.
- Record video for 5 to 10 seconds after the power supply cable is unplugged.
- During extreme weather conditions, camera should be sheltered from direct sunlight.
- Do not try to control the product while driving. Please make sure to control
the product in safe environments.
- Do not touch the SD card and/or camera with oily or wet hands.
- Do not insert impurities into the SD card slot.
- Do not use water or harsh chemicals when cleaning the camera.
Only use a soft and dry cloth for cleaning.
- If CJV1-Pro HD is physically damaged or disconnected from power supply,
the camera can not record and/or save data.
- Do not use dark tinting on vehicle windows and remove all impurities,
otherwise video recording can be distrusted and result in degraded recording quality.
- Check video recordings to ensure camera angle is properly adjusted
when changing the location of the camera.
- Contact your sales representative immediately if there are any product malfunctions.
- Do not apply violent force to camera, as it can cause damage to product.
- Product will operate normal
ly once installation in completed. Changes to the location of camera can cause product malfunction. Camera must be rmly placed on windshield. Do not apply violent force while changing the location of the camera.
- Only use SD cards that are supplied or recommended by VRS Fleet Products. The use of other SD cards can cause camera and SD card malfunctions.
- Do not disconnect the SD card from camera, turn o camera or turn o the vehicle during rmware upgrades, otherwise it can cause SD card to malfunction or the lose of serious data.
- Motion detection function can cause camera to malfunction by changes in environment, weather or climate.
Caution 3
How to use
4 Product Features
Real High-denition
- Built-in 3G-Sensor can detect and record impact, acceleration, and deceleration (3 Axis-X,Y,Z)
- Front : Real HD 1280X720
- View Angle front : 110˚
External GPS
- When external GPS is used, recorded data can be viewed in the exclusive PC viewer software, CJV1-Pro Viewer.
Optional accessory
Motion Detection
3 Dimensional Sensor (G)
- If no movement is detected by the G-sensor, Parking Mode will automatically change to Motion Detection Mode within 10 minutes.
- Records 10 seconds before motion detection and 20 seconds after motion detection
- This function can be operated using a Constant Power Supply.
- Constant Recording : every 60 seconds recording
- Event Recording : will save video recording les into the Event Folder when it detects the impact.
Event Button
Constant Recording and Event Recording
- Video and auto will immediately record and save when Event Button is triggered.
CJV1-Pro HD is a black-box that is installed into a vehicle for video and audio recording. The Janus Viewer can prove video and audio evidence of vehicle accidents, damages and/or physical conict.
Product Features 5
Parking-Mode function
Firmware Update
Audio Recording
- When recording, audio is synchronized with video recordings.
- Firmware upgrades for SD cards are available to help with product performance.
For more information, visit vrseetproducts.com
- It can be ecient to save a large number of video les in a small memory space of SD card.
- Parking Mode function can only be supported using the constant power supply.
- User’s have the option to use Parking Mode.
- Exclusive PC Viewer allows user’s to view video les, accident information
and the recorded GPS data.
Micro SD/ Format Function Support
- Videos can be viewed on smart phones, PMP and/or other devices with a SD Card slot.
- Older video les will be overwritten with new saved les.
- Built-in format function will safely store recorded data onto Micro SD Card.
- Press the Event button for 5 seconds in order to format the Micro SD Card.
Exclusive PC viewer
Backup battery / Voice announcement
- In case, power supply is disconnected, the last recordings can be safely stored
by back-up power supply.
- Voice Announcement allows user to check the condition of the device.
Adapter
6 Component
External GPS Video Cable SD Card Reader
Box component
Optional accessories
VRS Fleet Products is not liable for after service of Micro SD card and Micro SD card adapter
Main Unit and Mount Bracket
Cigarette Lighter Adapter
Manual
Micro SD Card SD card adapter
Constant Power Cable
Loading...
+ 16 hidden pages