VQ ActionCare CFC-175 Owner's Manual
Owner’s Manual
Smooth Rider
Mini-Bike
Model No.
CFC-175
Parts included in the box with the CFC-175 Smooth Rider Exercise Cycle:
1.
2.
3.
7.
4.
5.
10.
9.
6.
TM
8.
1. Main Frame 6. Bolts for frame support bar
2. Computer 7. Two resistance cables
3. Pedals
(marked “L” and “R”) 8. Upright row bar
4. Pedal straps
(marked “L” and “R”) 9. Batteries and wrenches
5. Frame support bar 10. Bolts for upright row bar
2
1. First, attach the forward cross bar to the
frame. Place bolts in both sides, then add
washers and tighten the nuts.
2. Attach right pedal to crank. This pedal is
marked “R” for right and tightens by turning
clockwise. Tighten by hand and do not overtighten.
3. Attach left pedal to crank. This pedal is
marked “L” for left and tightens by turning
counter-clockwise. Tighten by hand until
snug, then use wrench for last 1/4 turn only.
4. After turning pedal bolts by hand, use the
wrench to tighten the pedal bolts for the nal
1/4 to 1/2 turn only. Do not over-tighten.
5. Attach the pedal straps to each pedal,
starting at the inside of the pedal. Each strap
is marked with either an “L” for left side or “R”
for right side.
6. Attach the inside of each pedal strap rst,
then adjust the length of the strap on the
outside of the pedal.
Assembly Instructions
Loading...