VQ ActionCare CFC-170 Owner's Manual

Two resistance cables
Floor plate
Batteries for exercise meter
Upright row bar
Wrenches
Bolts for upright row bar

7.

8.

9.

10.

11.

12.

Owner’s Manual

Short Stroke
Mini-Bike

Model No.
CFC-170

Parts included in the box with the CFC-170 Short Stroke Mini-Bike:

1.

2.

11.

3.

7.

4.

5.

10.

8.

9.

6.

Main frame
Computer
Pedals (marked “L” and “R”)
Pedal straps (marked “L” and “R”)
Frame support bar
Bolts for frame support bar

1.

2.

3.

4.

5.

6.

12.

TM

2

1. First, attach the forward cross bar to the

frame. Place bolts in both sides, then add
washers and tighten the nuts.

2. Attach right pedal to crank. This pedal is

marked “R” for right and tightens by turning
clockwise. Tighten by hand and do not over­tighten.

3. Attach left pedal to crank. This pedal is

marked “L” for left and tightens by turning
counter-clockwise. Tighten by hand until
snug, then use wrench for last 1/4 turn only.

4. After turning pedal bolts by hand, use the

wrench to tighten the pedal bolts for the final
1/4 to 1/2 turn only. Do not over-tighten.

5. Attach the pedal straps to each pedal,

starting at the inside of the pedal. Each strap
is marked with either an “L” for left side or “R”
for right side.

6. Attach the inside of each pedal strap first,

then adjust the length of the strap on the
outside of the pedal.

Assembly Instructions