Page 1
Aurora,Ohio 44202
Fax: 330-562-1999
VPI
VIDEO
PRODUCTS
INCORPORATED
1275 Danner Drive
Tel: 330-562-7070
www.vpi.us
INSTALLATION GUIDE FOR THE 2-PORT TTL VIDEO ONLY SWITCH
SE-15V-2-2U1C-TTL / SE-15V-2-2C1U-TTL
INTRODUCTION
The VPI 2-port “TTL” controlled video only switch allows one (1) CPU to switch two (2) monitors (model SE-15V-2-2U1C-TTL) or
one (1) monitor to be switched to two (2) computers (model SE-15V-2-2C1U-TTL). All VPI 2-port "TTL" controlled video only
switches are available for VGA video with 150MHz bandwidth and 1600X1200 res olution.
INSTALLATION
1. Turn OFF power to CPU(s) and monitor(s).
FOR MODEL SE-15V-2-2C1U-TTL
2a. Using the supplied video cable, connect the video port of one
CPU to the “VIDEO 1” port on the unit.
NOTE: It will be necessary to repeat this step on the “VIDEO 2”
port with another VEXT-xx video cable that must be
purchased separately.
3a. Connect the monitor using its existing video cable to the “MONITOR”
port on the unit.
Windows Keyboard & Mouse Windows Keyboard & Mouse
FOR MODEL SE-15V-2-2U1C-TTL
2b. Using the supplied video cable, connect the video port of the
CPU to the “VIDEO” port on the switch.
3b. Connect the monitors using their existing video cables to ports
“MONITOR 1” and “MONITOR 2” on the switch.
NOTE: Using a VEXT-xx video cable the monitor cable(s) can
be extended up to 250 feet (sold separately).
VGA
Multi-Scan
Monitor
VGA
Multi-Scan
Monitor
EXISTING CABLE
VGA
Multi-Scan
Monitor
REAR VIEW OF
SE-15V-2-2C1U-TTL
VIDEO 2
EXISTING CABLE
VEXT-6
(supplied)
PC PC
VIDEO 1
xx
VEXT-
REAR VIEW OF
SE-15V-2-2U1C-TTL
MONITOR 2
VEXT-xx
VIDEO MONITOR 1
PC
MONITOR
5VDC
2.5A
+
-
5VDC
2.5A
+
-
VEXT-6
(supplied)
4. Plug in the SE-15V-2-2x1y-TTL switch and power it up.
5. Apply power to the CPU(s) and monitor(s).
Windows Keyboard & Mouse
1
Page 2
SPECIFICATIONS
MONITOR
• Crisp and clear 1600x1200 resolution
• Bandwidth is 150 MHz
VIDEO CONNECTORS
• Two (2) 15HD (VGA) male connectors and one (1) 15HD
(VGA) female connector for 2C1U model
• Two (2) 15HD (VGA) female connectors and one (1) 15HD
(VGA) male connector for 2U1C model
CONTROL
• 9 pin D female connector for remote control (RMT-2-BI sold
separately)
◊ Pin 1 = Ground
◊ Pin 2 = TTL or contact closure signal
◊ LED indication of port selection
POWER
• 120VAC or 240VAC-5VDC/2.0A AC Adapter
TROUBLESHOOTING
PROBLEM SOLUTION
Keyboard Error
No Video
WARRANTY INFORMATION
The warranty period on this product (parts and labor) is one (1) year from date of purchase. Please contact Video Products
Incorporated at 800-742-8324 (800-RGB-TECH) or 330-562-7070 or visit our website at
repairs and/or returns. A return authorization number is required for all repairs/returns.
COPYRIGHT
Copyright 2002 by Video Products Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the
prior written consent of Video Products Inc, 1275 Danner Drive • Aurora, OH 44202.
• Check cable connections on computer and
switch.
• Make sure that AC adapter is plugged in.
• Check cable connections on CPU and switch.
http://www.vpi.us for information regarding
CHANGES
The material in this guide is for information only and is subject to change without notice. Video Products Inc reserves the right to
make changes in the product design without reservation and without notification to its users.
SERIAL NO: ______________________
DATE: ______________________
INSPECTED BY: _____________________
SE-15V-2-2U1C-TTL
SE-15V-2-2C1U-TTL
MAN033 Revised 8/6/02
2
Loading...