Voza E-5, E-5S, E-5V User Manual

Page 29

Voza Technology Co., Ltd.

TFT LCD Monitor FCC ID. : QPT02040001

EXHIBIT 5

User‘s Manual

User‘s Manual

TABLE OF CONTENTS

Index 1
FCC Information 2
Important Safety Instruction 3
Precautions 4

1.0 Precautions 4

2.0 Installation 5

2.1 Connection 5

2.2 Operation 5

2.3 Cleaning 6

Introduction 7

3.1 Main Features 8
Using the LCD Monitor 10

4.1 Standard Package 10

4.2 OSD Windows's Icon function explanation 10

4.3 OSD (On Screen Display) control 12

4.4 Power management DPMS 12

4.5 Trouble shooting 13

4.6 Getting ready for operation 13

4.7 How to use Plug & Play 14

4.8 Video Enhancer ON/OFF control 14

Timing Charts 15
Specification 16

FCC Information!

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the
instruction, may cause harmful interference to radio communications. However, there is no gu arantee that interference will not
occur in a particular installation. If this equipment does cause unacceptable interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to tr y to cor rec t the interference by one or more
of the following measures:

! Reorient or relocate the receiving antenna.
! Increase the separation between the equipment and receiver.
! Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
! Consult your dealer or experienced radio/TV technician for help.

FCC Warning:

To assure continued FCC compliance, the user must use the provided grounded power-supply cord and the shielded video
interface cable with bonded ferrite cores. Also, any unauthorized changes or modifications to this LCD monitor would void the
user's authority to operate this device.

Department of Industry Canada (IC) Compliance Notice

"This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the
Radio Interference Regulation of the Canadian Department of Communications"

CE Certification

This device complies with the requirement of the EEC directive 89/336/EEC with regard to "Electromagnetic
compatibility."

Important Safety Instructions

1. Read these instructions thoroughly.

2. Follow all warning and instructions marked on this product.

3. Unplug the product from the wall outlet before cleaning.

4. Do not use the product near water. Never spill liquid of any kind on the product.

5. Do not place the product on an unstable cart, stand, or table. Doing so may cause the product to fall, which can seriously

damage it.

6. Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation, never block these ventilation

slots by placing the product on a bed, sofa, rug, or similar surface. This product should never be placed near or over a
radiator or heat register; or installed in any enclosure that prevents proper ventilation.

7. Make sure the power source complies with the power recommendation printed on the back of the product. I f you are not sure

of the type of power provided by the wall socket, consult your dealer or local power company.

8. Do not place any object on the power cord. Do not place this product where persons could walk on the power cord.

9. If you use an extension cord with this product, make sure the total ampere rating of the product(s) plugged into the extension

cord does not exceed the ampere rating of the extension cord.

10. Never push objects of any kind through the ventilation slots at the back of the product. To do so could risk fire or

electric shock.

11. Do not attempt to service this product yourself. Opening or removing covers may expose you to dang erous voltage that

could cause fire or electric shock. Refer all servicing needs to authorized service personnel.

12. Unplug this product from the wall outlet and contact authorized service personnel under the following conditions:

! When the power cord or plug is damaged or frayed.
! If a liquid has been spilled into or on the product, including rain.
! If the product does not operate normally when operating instructions are followed. Only ad just those controls that are

covered by the operating instructions, since improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to normal operation.

! If the product has been dropped or the cabinet has been dama ged.
! If the product exhibits a distinct change in performance, indicating a need for service.

Precautions

1.0 Precautions

! Handle with care when transporting.
! Any malfunction or damages caused by other power line connections than a direct connection to the specified one shall

be of user's responsibility.

! Set-up in a clear and dry place.
! Keep the monitor away from high capacity power transformers, electric motors, and other electric devices, which may

create strong magnetic fields.

! For ergonomic reasons, the preset size and position is recommended with the standard signals.
! Do not place any heavy object on the power cord; damage of the cable may cause shock or fire.

2.0 Installation

! Be careful never to drop the unit when handling, boxed or unboxed.
! Be sure the unit is firmly positioned on a rigid supporting surface.

2.1 Connection

! For complete electrical separation, unplug AC Cord from the Inlet on the LCD monitor or from the wall socket.
! Unplug the AC Cord from the outlet while not to be used for a few days.
! Be sure to operate the unit only on the specified power supply or may cause damage.
! Keep the AC Cord away from a pedestrian area.
! To disconnect the AC Cord or signal cable, always pull the plug. Never pull the cord.
! If, when the power on, the power indicator does not illuminate, turn off the switch, wait a while, and then turn it on

again.

! If the indicator still not illuminate, disconnect the AC Cord and contact your dealer.
! Do not overload power outlets or extension cords, it may cause fire or electric shock.

2.2 Operation

! To allow adequate air circulation, do not leave any objects either on the top or against the back of the cabinet that may

block the ventilation holes.

! To eliminate eye fatigue, do not operate the unit against a bright background or where the sun or other light can shine

on the Panel directly.

! For optimum viewing and operation comfort, the monitor should be just below eye level.
! Do not remove the Tilt Swivel Stand for operation. All ventilation holes on the cabinet bottom should be kept cleared

and they will be blocked up if it is removed.