Voxx Accessories SPKA05 User Manual
ALL-IN-ONE!
SOLO
KARAOKE SYSTEM
+ WIRELESS SPEAKER
QUICK START GUIDE
Instructions en français ................... 9
Instrucciones en español ................ 17
DC IN
Step 1: Unpack
Make sure the following
items came in this package.
Step 2: Charge
Before you start using the Singsation Solo for the first
time, it’s a good idea to charge it completely.
To charge the Singsation Solo: Plug
the included micro-USB charging
cable into the DC IN jack on the back
of the Singsation Solo.
Plug the other end of the USB
charging cable into a power source,
like a computer or a USB charging
adapter.
The POWER/PAIR button on the
front of the Singsation Solo is red while the speaker is
charging. It turns o when the Singsation Solo is fully
charged.
2
Singsation Solo
Karaoke System +
POWER/PAIR
Wireless Speaker
ECHO
VOLUME
Micro-USB
charging cable
Back
DC IN
POWER/PAIR
POWER/PAIR
Wi-Fi
Bluetooth
Bluetooth Settings
Wi-Fi Settings
8:45PM
Step 3: Turn on
Press and hold the POWER/PAIR
button until the Singsation Solo plays
its startup sound. Then release it. The
POWER/PAIR button starts blinking.
After a few seconds, the Singsation
Solo goes to Bluetooth pairing mode
to set up with your smartphone.
Step 4: Pair + Connect
Enable Bluetooth on your
smartphone or other device.
Make sure the POWER/PAIR
button on the front of the
Singsation Solo is blinking
rapidly. (If it isn’t, give a short
double-press on the POWER/
PAIR button. The Singsation
Solo announces “Pairing.”)
Front
Front
POWER/PAIR
POWER/PAIR
ECHO
VOLUME
Continues on the next page...
POWER/PAIR
ECHO
VOLUME
3
If you’ve previously paired your phone or other Bluetooth device with the
Singsation Solo, it will automatically attempt to reconnect to that device when
you switch it on. If you want to pair to a new device, give a short double-press
to the POWER/PAIR button. The Singsation Solo announces “Pairing” and the
POWER/PAIR button starts blinking.
Choose Singsation Solo from the pairing options on your
smartphone. (If it’s not in the list, choose “Scan” from your
phone’s Bluetooth menu.)
The Singsation Solo announces “Device Connected” when
it’s finished pairing and connecting to your smartphone. The
POWER/PAIR button turns solid blue.
Note: The process of enabling Bluetooth and connecting varies from device
to device. See your device’s owners manual for more information and specific
instructions.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10
meters). This range may vary, however, based on other factors, such as room layout,
wall material, obstacles, your device’s Bluetooth performance, etc. If you’re having
problems connecting to this speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.
4
POWER/PAIR
ECHO
VOLUME
POWER/PAIR
Step 5: Sing along!
Make sure the Singsation Solo is
on. (Press and hold the POWER/
PAIR button on the front of the
Singsation Solo if it isn’t.)
Start playing music on your
Bluetooth device and sing along!
To adjust the volume of your
voice: Use the VOLUME slider on
the front of the Singsation Solo.
To adjust the volume of the
music: Use the volume controls on
your Bluetooth device.
To adjust voice echo: use the
ECHO slider on the front of the
Singsation Solo.
ECHO
Front
POWER/PAIR
ECHO
VOLUME
5
Using the Multi-Mode Lighting
Press the POWER/PAIR button on
the front of the Singsation Solo to
activate multi-mode lighting. Keep
pressing the POWER/PAIR button
to cycle through the light modes
available, including the following
(among others):
Party: The light gives a rainbow
eect around the speaker.
Pulse: The light pulses to the beat of
your music (you might need to turn
your music up!).
Breath: The light gradually intensifies and diminishes.
Chase: The light races in a circle.
6
Front
POWER/PAIR
POWER/PAIR
ECHO
VOLUME
Tour of the Singsation Solo
Front
POWER/PAIR button activates the
lighting demo mode (press and hold
when o), turns the Singsation Solo
on/o (press and hold until you
hear the startup/shut-down sound),
and changes multi-mode lighting
(short single press). It also puts the
Singsation Solo into pairing mode
(short double-press when on). and
indicates Bluetooth/charging status:
• fast blinking blue while pairing or
reconnecting
• solid blue when paired
• solid red when charging
• o when the Singsation Solo is o
and not charging (or fully charged).
ECHO adjusts the echo eect on
your voice.
VOLUME adjusts the volume of your
voice. (Adjust the volume of your
music from your phone.)
POWER/PAIR
ECHO
VOLUME
7
Back
DC IN jack connects to the
provided USB charging
cable to plug the Singsation
Solo into a power source or
adapter.
8
DC IN
Loading...