Voxx Accessories SP892 User Manual

HEXSL

WIRELESS SPEAKER

QUICK START

GUIDE

Instructions en français ............ 9

Instrucciones en español ......... 17

SP892 QSG 00

Step 1: Unpack

Make sure the following
items came in this package.

HEX SL2

Wireless Speaker

Micro-USB

charging cable

Step 2: Charge the Speaker

Before you start using the speaker for the first time, it’s a
good idea to charge it completely.

To charge the speaker: Plug the
included micro-USB charging cable into
DC IN jack on the back of the speaker.

Plug the other end of the USB charging
cable into a power source, like a
computer or a USB charging adapter.

The charging indicator on the back of
the speaker is red while the speaker
is charging. It turns green when the
speaker is fully charged.

2

Back

Step 3: Turn on

Wi-Fi

Bluetooth

Bluetooth Settings

Wi-Fi Settings

8:45PM

Press and hold the button on the
front of the speaker. The speaker
makes its power-up sound and the
indicator light starts on the front of
the speaker starts blinking.

After a few seconds, the speaker
goes to Bluetooth pairing mode to
set up with your smartphone.

Step 4: Pair + Connect

Enable Bluetooth on your
smartphone or other device.

Make sure the indicator light
on the front of the speaker is
blinking rapidly. (If it isn’t, give
a short double-press on the
button. The speaker gives an
audio signal.)

Front

Continues on the next page...

3