Voxx Accessories SP891 Users Manual

Q U I C K

S T A R T

G U I D E

Getting to know Bluetooth

Bluetooth wireless is a quick and easy way
to connect a smartphone to a speaker or a
headset. There are basically two steps to
making Bluetooth work.

PAIRING:

The two devices get to know each other.

“Hi. I’m a phone.”

CONNECTING:

The two devices do something together (like
play music).

This guide takes you through the steps to get
started.

“Hi phone.

I’m a speaker.”

Step 1: Unpack

Make sure the following items came in this
package.

Your speaker

Audio
cable

USB
cable

1

Step 2: Charge the SL

Before you start using the HEX SL speaker
for the first time, it’s a good idea to charge it
completely.

To charge the speaker:
Plug the included USB
cable into the Charge
jack on the back of the
speaker.

Plug the other end of
the USB charging cable
into a power source, like
a computer or a USB
charging adapter.

The charging indicator on
the front of the speaker
is red while the speaker
is charging. It turns green
when the speaker is fully
charged.

Note: You can use the speaker
while it’s charging.

2

Speaker

back

Speaker

front

Step 3: Turn on

Flip the OFF / ON
switch on the bottom
of the speaker to
the ON position. The
power up tone sounds
and the indicator
light on the front of
the speaker starts
blinking.

After a few seconds,
the speaker goes to
Bluetooth pairing
mode to set up with
your smartphone.

Speaker bottom

Speaker

front

3