Voxx Accessories SP888 User Manual
QUICK
START
GUIDE
SP888 QSG 00
Getting to know Bluetooth
Bluetooth wireless is a quick and easy way to connect a
smartphone to a speaker or a headset. There are basically
two steps to making Bluetooth work.
“Hi. I’m a
PAIRING: The two devices get
phone.”
to know each other.
CONNECTING: The two devices
do something together (like play
music).
This guide takes you through the steps to get started.
“Hi phone.
I’m a speaker.”
PAIR
PAIR
M
M
Step 1: Unpack
Make sure the following items came in this package.
Your speaker
M
PAIR
USB
cable
Step 2: Charge your speaker
Before you start using the Canz Plus speaker for the first
time, it’s a good idea to charge it completely.
To charge the speaker: Plug the
included USB cable into the DC IN jack
on the back of the speaker.
Plug the other end of the USB charging
cable into a power source, like a
computer or a USB charging adapter.
The CHARGE indicator on the back of
the speaker is red while the speaker is
charging. It turns o when the speaker
is fully charged.
Note: You can use the speaker while it’s charging.
Speaker back
CHARGE
Step 3: Turn on
M
PAIR
M
Press and hold the button
on the front of the speaker.
The power up tone sounds
and the PAIR indicator
starts blinking.
After a few seconds, the
speaker goes to Bluetooth
pairing mode to set up with
your smartphone.
PAIR
M
Step 4: Pair + Connect
PAIR
M
Enable Bluetooth on your smartphone or
other device.
Make sure the PAIR indicator on the
front of the speaker is blinking rapidly.
(If it isn’t, give a short double-press on
the button. The speaker gives an audio
signal.)
If you’ve previously paired your phone or other Bluetooth device with this speaker,
the speaker will automatically attempt to reconnect to that device when you
switch the speaker on. If you want to pair to a new device, give a short doublepress to the button. The speaker gives a signal and the button starts blinking.
Wi-Fi
Wi-Fi Settings
Bluetooth
Bluetooth Settings
VPN Settings
8:45PM
Loading...