Voxx Accessories SP361 Users Manual

Q U I C K

CANZ

XL

WIRELESS SPEAKER

CANZXL

WIRELESS SPEAKER

S T A R T

G U I D E

Instructions en français ........... 10

Instrucciones en español ......... 19

SP361 QSG 00

Getting to know Bluetooth

Bluetooth wireless is a quick and easy way to connect a
smartphone to a speaker or a headset. There are basically
two steps to making Bluetooth work.

“Hi phone.

PAIRING: The two devices

get to know each other.

“Hi. I’m a

phone.”

CONNECTING: The two

devices do something
together (like play music).

This guide takes you through the steps to get started.

2

I’m a speaker.”

Step 1: Unpack

Make sure the following items came in this package:

» the Canz XL 2 speaker
» USB charging cable
» USB power adapter

Step 2: Charge the Canz XL 2

Before you start using the Canz XL 2 speaker for the first
time, it’s a good idea to charge it completely.

To charge the speaker: Plug the
included charging cable into the DC
IN jack on the speaker’s back panel.

Plug the other end into a power
source, like a computer or the
included USB charging adapter.

IMPORTANT: For best results, use the USB
charging adapter included with this speaker.
Other adapters (or a computer) will charge the
speaker much more slowly.

The charging indicator next to the DC IN jack is red while
the speaker is charging. It turns green when the speaker is
fully charged.

Speaker back

3

8:45PM

Step 3: Turn on

Press and hold the button on
the top of the speaker.

The power-up tone sounds and
the indicator light on the front
of the speaker starts blinking.

After a few seconds, the
speaker goes to Bluetooth
pairing mode to set up with
your smartphone.

Step 4: Pair + Connect

Enable Bluetooth on your
smartphone or other device.

Make sure the indicator light
on the front of the speaker is
blinking rapidly. (If it isn’t, give
a short double-press on the
button. The speaker gives an
audio signal.)

4

Speaker top

Speaker front

Wi-Fi

Wi-Fi Settings

Bluetooth

Bluetooth Settings

Speaker front

If you’ve previously paired your phone or other Bluetooth device with this
speaker, the speaker will automatically attempt to reconnect to that device
when you switch the speaker on. If you want to pair to a new device, give
a short double-press to the
indicator light on the front of the speaker starts blinking.

button. The speaker gives a signal and the

Choose 808 Canz XL 2 from the pairing options on your
smartphone. (If it’s not in the list, choose “Scan” from your
phone’s Bluetooth menu.)

The speaker gives an audio signal when it’s finished pairing
and connecting to your smartphone. The indicator light on
the front of the speaker turns solid blue.

Note: The process of enabling Bluetooth and connecting varies from device
to device. See your device’s owners manual for more information and specific
instructions.

Bluetooth Wireless Connection Tips

• Make sure the Bluetooth capability of your device is turned on.

• Make sure there’s nothing plugged into the speaker’s AUX IN jack when

you’re trying to use Bluetooth.

• The Bluetooth wireless connection works up to a range of roughly 33 feet (10
meters). This range may vary, however, based on other factors, such as room
layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re
having problems connecting to this speaker, move closer to it.

• If your device asks you for a password to connect, use “0000”.

• If you’ ve paired your device with the speaker before but you’re having trouble
reconnecting when you turn the speaker back on, give a short press to the
button while the indicator light on the front of the speaker is flashing. The speaker
will attempt to connect to a previously paired device.

5

Step 5: Play music

Set your device’s volume for music
to 50%.

Note: This is to make sure the sound from the
speaker isn’t too loud when you start streaming.

Start playing music or other audio
on your device. Within seconds, the

Now playing

Media volume

8:45PM

8:45PM

speaker starts streaming the audio
wirelessly via Bluetooth.

To adjust the volume of your audio:
Press and release the + and –buttons on the top of the
speaker (or use the volume controls on your phone).

Controlling Playback from the Canz XL 2

If you’re playing music via Bluetooth, it’s easy to play/
pause and skip tracks from the speaker.

To play/pause: press once on the speaker’s
To skip forward: press and hold the speaker’s + button.
To skip backwards: press and hold the speaker’s – button.

6

button.

Using Bass Boost

The Canz XL 2 speaker has a Bass Boost feature that
enhances the lower frequencies in your music. Bass Boost
is turned on by default. Press the button on the top of
the speaker to toggle Bass Boost on and o.

Using the Aux In input

Use a 3.5mm audio cable (not
included) to connect the audio
output from your device to
the AUX IN audio input on the
speaker’s back panel.

The speaker automatically
switches to the AUX IN audio,
and the indicator light on the
front of the speaker turns solid
white.

To listen to Bluetooth audio
again, unplug the cable from
the speaker’s AUX IN jack. The
speaker will try to reconnect to
the last Bluetooth device.

Speaker back

7

Tour of the speaker

Top

button has four functions:

• it turns the speaker on and

o (press and hold)

• it puts the speaker into pairing mode (short double-press when

the speaker’s on) to connect to a new Bluetooth device

• it attempts to reconnect to the last paired device (short single-

press when the speaker’s on).

• it plays/pauses playback when audio is playing via Bluetooth

button switches between bass boost and regular equalization.

– / + decrease or increase the volume of the speaker’s audio. They
also skip forward or backward (press and hold) when audio is
playing via Bluetooth.

Front

Indicator light shows the Bluetooth status of
the speaker:

• fast blinking blue while pairing

• slow blinking blue while reconnecting

• solid blue when connected

• solid white when the AUX IN jack is in use

• o when the speaker’s o.

8

Indicator light

Back

AUX IN jack lets you connect an audio device
directly to the speaker using a 3.5mm audio cable.

Charge indicator shows the charging status of
the speaker:

• solid red while charging

• green when fully charged

DC IN jack connects to the provided micro USB charging cable to
recharge the speaker’s battery.

Turning the 808 Sounds On and O (Silent Mode)

The Canz XL 2 speaker provides status/alert sounds when you turn the speaker
on and o, as well as when you’re pairing.

To turn status/alert sounds on/o: press and hold the + and – buttons on top
of the speaker (while it’s on) until the speaker beeps twice.

Charge
indicator

Using the speaker
handle

The Canz XL 2 has a built-in
handle that comes in the package
latched closed. To unlatch the
handle, press on the latch release

on the speaker back and pull up on the handle. To latch the handle back in
place, press on the latch release and push the handle back in.

Speaker back

Latch release

9