Voxx Accessories SP270 User Manual

Q U I C K

S T A R T

G U I D E

Instructions en français ........... xx

Instrucciones en español ......... xx

SP270 QSG 00

Getting to know Bluetooth

Bluetooth wireless is a quick and easy way to connect a
smartphone to a speaker or a headset. There are basically
two steps to making Bluetooth work.

PAIRING: The two

devices get to know each

“Hi. I’m a

phone.”

other.

CONNECTING: The two

devices do something
together (like play music).

This guide takes you through the steps to get started.

2

“Hi phone.

I’m a speaker.”

Step 1: Unpack

Make sure the following items came in this package:

• the LXS speaker

• an AC adapter

Step 2: Charge the LXS

Before you start using the LXS speaker for the first time,
it’s a good idea to charge it completely.

To charge the speaker: Plug
the included AC adapter into
the DC IN jack on the speaker’s
back panel.

Plug the other end of the AC
adapter into an AC outlet or
surge protector.

The charging indicator next to
the DC IN jack is red while the
speaker is charging. It turns green when the speaker is fully
charged.

Note: You can use the speaker while it’s charging.

Speaker back

3

8:45PM

Step 3: Turn on

Press and hold the button on
the top of the speaker.

The power-up tone sounds and

button starts blinking.

the

After a few seconds, the
speaker goes to Bluetooth
pairing mode to set up with
your smartphone.

Step 4: Pair + Connect

Enable Bluetooth on your
smartphone or other device.

Make sure the button on the
top of the speaker is blinking
rapidly. (If it isn’t, give a short
double-press on the button.
The speaker gives an audio
signal.)

4

Speaker top

Wi-Fi

Wi-Fi Settings

Bluetooth

Bluetooth Settings