Voxx Accessories SP251 Users Manual

Q U I C K

S T A R T

G U I D E

SP251 QSG 00

Getting to know Bluetooth

Bluetooth wireless is a quick and easy way
to connect a smartphone to a speaker or a
headset. There are basically two steps to
making Bluetooth work.

PAIRING: The

two devices get
to know each
other.

CONNECTING:

The two devices
do something
together (like play
music).

This guide takes you through the steps to get
started.

“Hi. I’m a

phone.”

“Hi

phone.

I’m a

speaker.”

Step 1: Unpack

Make sure the following items came in this
package.

Your speaker

USB
cable

Step 2: Charge the NRG GLO

Before you start using the HEX NRG GLO
speaker for the first time, it’s a good idea to
charge it completely.

To charge the speaker:
Plug the included USB
cable into the Charge jack
on the back of the speaker.

Plug the other end of
the USB charging cable
into a power source, like
a computer or a USB
charging adapter.

The charging indicator on the back of the
speaker is red while the speaker is charging.
It turns green when the speaker is fully charged.

Note: You can use the speaker while it’s charging.

Speaker

back

Step 3: Turn on

Press and hold the
Power/Pair button on
the front of the speaker.
The power up tone
sounds and the indicator
light on the front of the
speaker starts blinking.

After a few seconds,
the speaker goes to
Bluetooth pairing mode
to set up with your
smartphone.

Speaker

front