Voxx Accessories PNM411 Users Manual

User Guide

What’s inside

Welcome! ................................................................ 2

Getting started ...................................................... 3

Tour of the system ............................................... 7

Everyday use .........................................................13

Cameras ............................................................14

Motion/Alerts ..................................................18

Recording ......................................................... 21

Playing Back Pictures and Videos ....... 22

Sleep Mode ..................................................... 23

Lullabies ...........................................................24

Contrast............................................................25

Settings ............................................................26

Troubleshooting / FAQs ..................................28

Getting Started

WELCOME!

This baby monitoring system
makes it simple to keep your
eyes and ears on your little
one! This guide takes you
through the steps to get
started!

See our setup videos

Go to ProjectNursery.com/
Electronics or scan the QR code
here.

Before you start...

Make sure you read the Important Information
sheet included in this package.

Step 1: Unpack

Wireless camera

The accessories:

(2) 10-foot charging cables
(2) power adapters

Parent monitor

2

GETTING STARTED

Step 2: Charge the monitor

Find one of the charging
cables included in this
package.

Plug one end of this cable into
the USB CHARGING jack on
the side of the parent monitor.

Plug the other end of the
charging cable into one of the
included charging adapters.
Then plug the adapter into an
outlet or surge protector.

WARNING

Step 3: Position the camera(s)

Find a location for the
camera that gives you the
best view of your baby in his
or her crib.

Place the camera on a flat surface, like a
dresser or shelf, or mount the camera to a wall
using the keyhole slots on its bottom.

IMPORTANT: NEVER place the camera or cords
of any kind inside the crib. NEVER place the
camera or cords within reach of the baby.

Strangulation Hazard: Children have STRANGLED in
cords. Keep this cord out of the reach of children (more
than 3ft (0.9m) away). Never use extension cords with
AC Adapters. Only use the AC Adapters provided.

Getting Started

3

Getting Started

Step 4: Plug in the camera(s)

Find the other charging cable(s) included in
this package.

Plug one end into the
CHARGING jack on the
back of the camera(s).

Plug the other end into
a charging adapter. Then
plug the adapter into an
outlet or surge protector.

The camera turns on
automatically when it’s
plugged in (the indicator
light on the base below
the camera lens turns
blue).

Step 5: Turn on the monitor

Press and hold the POWER
button on the parent monitor to
turn it on.

Congratulations!

Your system is ready to use! The camera(s)
comes pre-paired with your parent monitor.
However, it’s a good idea to go ahead and set
the time on your parent monitor now, before
you start using it.

For information on how to use your new
system, see the next chapter of this owner’s
manual.

4

Step 6: Set the time on the monitor

Press the MENU button on the parent

1

monitor. The menu appears on screen.

Use the arrows to highlight SETTINGS. Press

2

OK/ZOOM to select it. The Settings menu
appears on screen.

72º

Press the down arrow to highlight Time Set.

3

12:00AM

Press OK/ZOOM to select it.

72º

Temperature
Time Set
Factory Reset
Support
Product Information

12:00AM

Use the up/down arrow buttons to set the

4

hours, minutes, and AM/PM. Press OK/
ZOOM when you’re finished.

72º

Temperature

Time Set

Factory Reset
Support
Product Information

12:00AM

Time: 12:00 AM

Getting Started

5

TOUR OF THE SYSTEM

Parent Monitor

Tour of the system

Watching baby

You can turn the display on and off without
turning the monitor off. You’ll still hear your
baby, but the display will be asleep until you
awaken it.

To turn the display on or off: Press the
VIDEO ON/OFF button on the parent

monitor.

accesses the system’s menu screens.

turns the monitor on and off (press and

hold).

and turn the volume down/up. In menu
screens, these navigate left/right.

zooms the camera in/out.

and navigate up/down in menu screens.

SOUND LEVEL indicators show you the level of
sound from your baby’s room.

lets you talk through the camera’s

speaker. Press and hold while talking.

turns the screen on and off. Press and

hold to switch cameras.

6

Built-in easel

stand

Parent monitor side and back panels

USB CHARGING jack plugs into your charging cable to recharge

or power the parent monitor.

Built-in easel stand lets you stand the unit on a flat surface.

Tour of the system

Zoom

To zoom the active camera:
Press the OK/ZOOM button
on the parent monitor.

Talking to baby

To talk through the speaker
on the active camera: Press

and hold the TALK button on
the parent monitor.

Talk normally to the parent
monitor while you’re
pressing the TALK button—
your voice will come out on
the camera’s speaker.

Release the TALK button
when you’re done talking.

Listening to baby

The SOUND LEVEL
indicators on the parent
monitor show you at a
glance the sound level in
your baby’s room, regardless
of how loud the audio is on
the parent monitor.

To increase or decrease
the volume of the audio
monitor: Press the VOL+ or
VOL– buttons on the parent

monitor.

7

Status Bar Indicators

Tour of the system

Parent monitor

72º

Temperature
reading

2:35 PM

shows the strength of the current camera’s signal.

Temperature reading shows the temperature in Fahrenheit
at the active camera. If you want to change this to Celsius,
see page 27 for instructions.

shows the camera that the monitor is currently

displaying.

indicates that the Low Battery Noise alert is on. This
means the monitor gives an audio signal when it needs to
be recharged. See page 18 for instructions on turning this
on and off.

indicates that Motion Activated Video Alert is on. This
means the monitor automatically switches on whenever
the camera detects motion. See page 18 for instructions on
turning this on and off.

indicates that Sound Activated Video Alert is on. This
means the monitor automatically switches on whenever
the camera detects sound. See page 18 for instructions on
turning this on and off.

indicates that Temperature Alert is on. This means
the monitor shows an alert message if the temperature
at a camera gets too high or too low. See page 19 for
instructions on setting temperature alerts.

8

indicates the Lullabies are playing through one of the cameras. See page 24 for instructions on

playing lullabies.

indicates that the camera is using night vision. The cameras automatically switch to night vision

when they detect that the room has gotten dark.

indicate that the monitor is scanning through the available cameras. The number
indicates how quickly the monitor switches cameras. See page 17 for information on turning
camera scanning on and off.

indicates the level of the monitor’s rechargeable battery. If you see or in this space,

it’s time to recharge. See page 3 for more information.

On-Screen Indicators

appears when you’ve pressed the TALK button and are talking through the camera’s
speaker. See page 8 for more information.

appears when the monitor cannot get the signal from the active camera or when another
monitor is in use. See page 27 for more information.

appears when a Temperature Alert has been triggered because your baby’s room is too hot
or cold.

appears when the monitor’s rechargeable battery has less than 10% charge.

Tour of the system

9