Voxx Accessories PNJ50 User Manual
What’s in the box?
(1) Dreamweaver Sound Soother Speaker
(1) Charging Cable
Getting started
1. CHARGE THE DREAMWEAVER
Before you start using the
Dreamweaver for the first time,
it’s a good idea to charge it
completely.
To charge the Dreamweaver:
Open the DC IN flap on the
back of the Dreamweaver. Plug
the included charging cable
into the jack behind this flap.
Plug the other end into a power
source, like a computer or a USB
charging adapter. The indicator
above this jack turns red to show
the Dreamweaver is charging.
Flap open
Back of the
Dreamweaver
2. TURN ON THE DREAMWEAVER
Press and hold the
the back of the Dreamweaver.
button on
Back of the Dreamweaver
Everyday use
PLAYING SOUNDS
The Project Nursery Dreamweaver offers a variety of
soothing lullabies and nature sounds, as well as white noise,
to calm baby.
To cycle through these sounds:
Press the
of the Dreamweaver. Each press
goes to a different selection.
To adjust the volume: Press the
– or + button.
To turn sounds off: Press and
hold the button on the back
of the Dreamweaver. (If lights
are on, they remain on.)
button on the back
Back of the Dreamweaver
PAIRING WITH YOUR PHONE
(BLUETOOTH)
The Project Nursery Dreamweaver can also play music from
your smartphone or other Bluetooth device. Here’s how to
set it up.
With the Dreamweaver on, give
a short press to the
the back of the Dreamweaver. The
blue indicator light on the back of
the Dreamweaver starts blinking.
Enable Bluetooth on your
smartphone or other device (if it
isn’t already enabled).
Choose “PN Dreamweaver” from the list of pairing options
on your smartphone. (If it’s not in the list, choose “Scan”
from your phone’s Bluetooth menu.)
The Dreamweaver gives an audio signal when it’s finished
pairing and connecting to your smartphone. The indicator turns
solid blue.
Note: The process of enabling Bluetooth and connecting varies from device to
device. See your device’s owners manual for more information and specific
instructions.
button on
Back of the Dreamweaver
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10
meters). This range may vary, however, based on other factors, such as room
layout, wall material, obstacles, your device’s Bluetooth performance, etc. If
you’re having problems connecting to this speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.
USING THE TIMER
The timer shuts the lights
and sound off automatically
after a set amount of time.
To set the timer: Press the
button on the back of the
Dreamweaver.
The minutes indicator on the
back of the Dreamweaver
shows the amount of time on
the timer: 15, 30, 45, or 60
minutes.
to cycle through
Press
these options or turn the
timer off.
Back of the Dreamweaver
USING THE NIGHTLIGHT
The Dreamweaver offers four kinds
of fun, firefly light modes.
To turn the light on: Press the
button on the back of the
projector.
To change light modes or turn
off the light: Press the button
repeatedly to cycle through the
modes (fade, sparkle, dance, and
rhythm) and to turn the light off.
Back of the Dreamweaver
Questions?
Just call 1-844-393-7338 or visit ProjectNursery.com
©2017 Voxx Accessories Corp.
3502 Woodview Trace, Suite 220
Indianapolis, IN 46268
PNJ50 QSG 01
DREAMWEAVER
SMART LIGHT & SOUND SOOTHER
Quick Start Guide
Loading...