Voxx Accessories HPA230 User Manual
Unpack
Make sure you have the following items in your 808 EarCanz
TRU 2 package:
• 808 EarCanz TRU 2 Bluetooth earbuds
• Charging case
• Micro USB charging cable
• Eartips in 3 sizes
• Ear fins in 3 sizes
If you have any questions about this product, visit
808Audio.com or call our toll-free help line at
1-800-732-6866.
1. Charge the earbuds and case
For best performance, we recommend you charge your EarCanz
TRU 2 earbuds and charging case fully before using them.
Make sure the earbuds are seated
firmly in the case as shown here.
Plug the micro-USB end of the
CASE BUDS
Plug the other end of the charging cable into a USB power source
(like a computer or a USB charger).
The indicator lights on the back of the charging case (and on
the side of each earbud) turn red while the earbuds and case are
charging. They turns o when the earbuds and/or case are fully
charged.
included USB charging cable into
the charging jack on the back of the
charging case.
2. Turn on the EarCanz TRU 2 3. Pair + Connect
Unplug the USB charging cables
Right ear
Right earbud
when the earbuds are charged.
Place each earbud in its assigned
ear (marked R or L on the inside
of each bud).
R
To turn on the EarCanz TRU 2: Press and hold the button on
the back of the right earbud for about 3 seconds, until you hear
“power on.”
Then press and hold the
button on the front of the left earbud
for about 3 seconds, until you hear “power on.”
Linking for Wireless Stereo
After you turn them both on, the earbuds start the linking process
for wireless stereo. The indicator on the back of each earbud starts
blinking red, then white when the earbuds are linked to each other.
The left earbud says “left connected” and the right says “right
connected.” Now you’re ready to pair with your smartphone or other
Bluetooth device!
If you don’t hear “left connected” and “right connected”: Turn
the earbuds o (press and hold the
o”). Then turn them both back on again.
TIP: You can use the right earbud by itself as an earpiece for
Bluetooth calls. Just turn it on by itself (and leave the left earbud
o).
To turn the EarCanz TRU 2 o: Press and hold the button on one
of the earbuds for 3 seconds.
button until they say “power
8:45PM
Wi-Fi
Wi-Fi Settings
Bluetooth
Bluetooth Settings
VPN Settings
Choose 808 EarCanz TRU 2 from the pairing options on your
smartphone. (If it’s not in the list, choose “Scan” from your phone’s
Bluetooth menu.)
IMPORTANT: If you’ve previously paired your phone or other Bluetooth device with
these earbuds, the earbuds will automatically attempt to reconnect to that device
when you turn them on. If you want to pair to a new device, turn Bluetooth o on
the previously paired device. The earbuds will enter pairing mode. Then choose 808
EarCanz TRU 2 from the pairing options on the new device.
The earbuds say “device connected” when the process is complete.
The indicators blink white every 6 seconds.
Note: The process of enabling Bluetooth and connecting varies from device
to device. See your device’s owners manual for more information and specific
instructions.
Enable Bluetooth on your smartphone or other
device.
3. Pair + Connect (continued)
EARCANZ TRU
Using the EarCanz TRU 2
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• The earbuds’ Bluetooth wireless connection works up to a range of roughly 33 feet
(10 meters). This range may vary, however, based on other factors, such as room
layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re
having problems connecting to the earbuds, move closer to your phone.
• Make sure your device supports audio transfer A2DP.
• If your device asks you for a password to connect, use “0000”.
To pair the EarCanz TRU 2 again
After turning your earbuds back on, they automatically attempt to
reconnect to the last connected device. If the last connected device
is not available, the earbuds will enter pairing mode and be ready to
pair to a new or dierent device.
Forget to turn on your device’s Bluetooth before turning on the earbuds?
Just turn both earbuds off and back on once you’ve turned on your device’s
Bluetooth to reconnect to it.
Putting the EarCanz TRU 2 in your ears
The EarCanz TRU 2 earbuds come with medium-sized eartips and ear
fins installed. You can use dierent-sized tips and fins, but first try
them with the medium sizes.
Find the L and R markings on the buds.
Left earbud
If the tips or fins don’t fit, follow the directions in the next section to
change them.
Left ear
L
Place each eartip in your ear as shown here.
The fin should go in the small ridge just
above your ear canal on your outer ear—it
might go automatically, or you might need
to move it into place.
Changing the eartips or fins
If you want to use a dierent size ear fin or bud, find the size you want,
and match the L/R fins to L/R buds.
Listening to music
Set your device’s volume for music to 50%.
Note: This is to make sure the sound from the earbuds isn’t too loud when you
start streaming.
Start playing music or other audio on your device. Within seconds, the
earbuds start streaming the audio via Bluetooth.
Controlling playback and volume
The button on either earbud lets you control music playback
wirelessly.
To play/pause music: Press the button.
To skip to the next track: Give a quick double-press to the button.
To adjust volume: Use the volume controls on your phone.
Answering/ending phone calls
The right earbud has a built-in microphone, so you can use it for
phone calls. Your phone will ring through the right earbud when you’re
receiving a call.
To answer or end a phone call: Give a short press on the
To decline a phone call: Press and hold the
IMPORTANT: Not all phones support playback control and phone answer/end control.
Check your phone’s user manual for more information if you’re having trouble with
these functions.
button for one second.
button.
Turning the EarCanz TRU 2 Off
To turn the EarCanz TRU 2 o: Press and hold the button on one of
the earbuds for 3 seconds.
W IRELES S E ARBUDS
quick start guide
HPA230 QSG 00
Loading...